🚀 Version 5.8.1

This fixes #247, which can be caused when certain folders are not
accessible for some reason. This can occur due to network reasons,
but also because the linked folder in question is iCloud Drive.

.github/FUNDING.yml

@@ -1 +1,2 @@
-custom: ['https://nicoverbruggen.be/sponsor', 'https://paypal.me/nicoverbruggen']
+github: nicoverbruggen
+custom: ['https://nicoverbruggen.be/sponsor']

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,38 @@
+---
+name: Bug report
+about: Something going wrong? File a bug report!
+title: ''
+labels: bug
+assignees: nicoverbruggen
+
+---
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**Required information**
+ - Did you consult the FAQ in the README? [yes/no]
+ - Did you try "Fix My Valet"? [yes/no]
+ - OS: [e.g. macOS Monterey]
+ - PHP Monitor version [e.g. v5.0.1]
+
+**Additional log**
+You can help me figure out even more information by sending me your verbose log for your latest session of PHP Monitor. Logging is disabled by default. 
+
+You can start extra verbose logging by running: `touch ~/.config/phpmon/verbose` and restarting PHP Monitor. You can find the latest log in: `~/.config/phpmon/last_session.log`. Please attach it here!
+
+**Additional context**
+Add any other context about the problem here.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,22 @@
+---
+name: Feature request
+about: Suggest an enhancement.
+title: ''
+labels: enhancement
+assignees: nicoverbruggen
+
+---
+
+_Enhancement requests that are not immediately approved will be moved to a discussion instead._
+
+**Is your feature request related to a problem? Please describe.**
+A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.github/contributing.md

@@ -0,0 +1,23 @@
+# Contribution Guidelines
+
+Thank you for your interest in contributing to PHP Monitor.
+
+I consider this project a bit of a nice side-project to my daily gig, so it is very much a personal affair where I love to tinker around.
+
+**While the code of the latest PHP Monitor release is public, many things are constantly in flux that may not be pushed to this repository yet.**
+
+I don't mean to be rude, but I don't want other people involved with the project beyond simply contributing a few small things here and there, as has been the case in the past.
+
+The extra mental overhead of having additional contributors to report to, whose code will need to be reviewed... it's a lot and it makes working on PHP Monitor less enjoyable for me. 
+
+Plus, at this point, the majority of PHP Monitor's main functionality is also done.
+
+As a result, I may refer you to this file at some point. Again, I don't wish to be rude, but this general rule stands:
+
+**Making any changes in a fork and opening a pull request without opening an issue first will most likely result in your PR being closed without mercy.**
+
+To repeat, I am **not opposed** to small contributions and fixes, if they are **meaningful or insightful**.
+
+To learn more, please check out the [pull request template](/.github/pull_request_template.md) which contains more information about my contribution requirements. (This will also show up when you open a new PR.)
+
+Thank you for respecting this!

.github/pull_request_template.md

@@ -0,0 +1,35 @@
+Hello there! Thank you for considering a pull request for PHP Monitor. 
+
+Please read the text below first before you submit your PR.
+
+## Do not PR unless...
+
+In order to make development and maintenance of PHP Monitor easier, I ask that you _avoid_ making a pull request in the following situations:
+
+* No issue has been associated with the changes you‘d like to merge
+* You have not announced you will be addressing a particular issue
+* The PR is a low effort change: e.g. commits that only fix typos or phrasing may not be accepted
+
+(If you believe the phrasing of particular text in the app is unclear or incorrect, please open an issue first.)
+
+In short: It is usually best to *get in touch first* if you are making substantial changes.
+
+## About destination branches
+
+Please keep in mind that `main` is reserved for the current code state of the latest release and should *never* be the destination branch unless a new release is happening. **Pull requests that target `main` will be closed without mercy.**
+
+Usually, the best target is the stable `dev/x.x` branch that corresponds with the latest major version that is released. 
+
+There may be a newer branch available, which is an appropriate place for bigger changes, but please keep in mind that it is usually best to announce you‘ll be working on such a change before you spend the time, since as the lead contributor I might not even want said change in the app. Thank you.
+
+## Your changes
+
+(feel free to remove the disclaimer above)
+
+* Affected parts of the app: shared code / UI code / CLI (remove what does not apply)
+* Estimated impact on performance: none / low / high (remove what does not apply)
+* Made a new build with Xcode and tested this: yes / no (remove what does not apply)
+* Tested on macOS version + architecture: (e.g. "Monterey on M1" or "Big Sur on Intel")
+* References issue(s): (please reference the issue here, using # and the number of the issue)
+
+(please describe what you have changed here)

.gitignore

@@ -2,4 +2,5 @@ phpmon.xcodeproj/project.xcworkspace
 phpmon.xcodeproj/xcuserdata
 PHP Monitor.xcodeproj/project.xcworkspace
 PHP Monitor.xcodeproj/xcuserdata
+phpmon-updater/PHP Monitor Self-Updater.app
 .DS_Store

.swiftlint.yml

@@ -0,0 +1,15 @@
+disabled_rules:
+  - todo
+  - identifier_name
+  - force_try
+  - force_cast
+  
+opt_in_rules:
+  - empty_count
+
+included:
+  - phpmon
+  - phpmon-tests
+
+excluded:
+  - phpmon/Vendor

DEVELOPER.md

@@ -0,0 +1,90 @@
+# DEVELOPER README
+
+## ✅ Linting
+
+This project uses the [SwiftLint](https://github.com/realm/SwiftLint) linter. You must install it and can run it like so:
+
+```
+swiftlint
+```
+
+It also automatically runs when you try to build the project. You'll get a warning if `swiftlint` is not installed, though. You can attempt to automatically fix issues:
+
+```
+swiftlint --fix
+```
+
+## ⚙️ Preferences
+
+You can find the persisted configuration file in `~/Library/Preferences/com.nicoverbruggen.phpmon.plist`
+
+These values are cached by the OS. You can clear this cache by running:
+
+```
+defaults delete com.nicoverbruggen.phpmon && killall cfprefsd
+```
+
+## 🔧 Build instructions
+
+<img src="./docs/build.png" width="404px" alt="build button in Xcode"/>
+
+If you'd like to build PHP Monitor yourself, you need:
+
+* Xcode (usually the latest version)
+* The contents of this repository
+
+Once you have downloaded this repository, open `PHP Monitor.xcodeproj`, and you should be able to immediately build the app for your system by pressing Cmd-R. This will create a debug build. (If Xcode complains about code signing, you can turn it off.)
+
+If you'd like to create a production build, choose "Any Mac" as the target and select Product > Archive.
+
+## 🚀 Release procedure
+
+1. Merge into `main`
+2. Create tag
+3. Add changes to changelog + update security document
+4. Archive
+5. Notarize and prepare for own distribution
+6. After notarization, export .app
+7. Create zipped version
+8. Calculate SHA256: `openssl dgst -sha256 phpmon.zip`
+9. Upload to GitHub and add to tagged release
+10. Update Cask with new version + hash
+11. Check new version can be installed via Cask
+
+## 🍱 Marketing Mode
+
+You can enable marketing mode by setting the `PHPMON_MARKETING_MODE` environment variable. It preloads a list of (fake) domains in the domain window list for screenshot & marketing purposes.
+
+    launchctl setenv PHPMON_MARKETING_MODE true
+
+## 🐛 Symbolication of crashes
+
+If you have an archived build of the app and exported the DSYM, it is possible to symbolicate .ips crash logs.
+
+For example, given the following crash (from an .ips file):
+
+```
+Thread 2 Crashed::  Dispatch queue: com.apple.root.user-initiated-qos
+0   libswiftDispatch.dylib        	    0x7ff82aa3ab8c static OS_dispatch_source.makeProcessSource(identifier:eventMask:queue:) + 28
+1   PHP Monitor                   	       0x1096907d8 0x10965e000 + 206808
+                                                |            |
+                                             address      load address
+2   PHP Monitor                   	       0x1096903ac 0x10965e000 + 205740
+3   PHP Monitor                   	       0x10968f88b 0x10965e000 + 202891
+```
+
+You must use the correct order for the the address and load address in the command below:
+
+```
+$ atos -arch x86_64 -o '/path/to/PHP Monitor.app.dSYM/Contents/Resources/DWARF/PHP Monitor' -l 0x10965e000 0x1096907d8
+             |                                           |                                       |              |
+             architecture                                path to DSYM                         load address    address
+```
+
+This will return the relevant information, for example:
+
+```
+FSWatcher.startMonitoring(_:behaviour:) (in PHP Monitor) (PhpConfigWatcher.swift:95)
+```
+
+For more information, see [Apple's documentation](https://developer.apple.com/documentation/xcode/adding-identifiable-symbol-names-to-a-crash-report).

LICENSE

@@ -1,6 +1,6 @@
 MIT License
 
-Copyright (c) 2019 Nico Verbruggen
+Copyright (c) 2019-2023 Nico Verbruggen
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

PHP Monitor.xcodeproj/xcshareddata/xcschemes/PHP Monitor DEV.xcscheme

@@ -0,0 +1,142 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Scheme
+   LastUpgradeVersion = "1320"
+   version = "1.3">
+   <BuildAction
+      parallelizeBuildables = "YES"
+      buildImplicitDependencies = "YES">
+      <BuildActionEntries>
+         <BuildActionEntry
+            buildForTesting = "YES"
+            buildForRunning = "YES"
+            buildForProfiling = "YES"
+            buildForArchiving = "YES"
+            buildForAnalyzing = "YES">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C41C1B3222B0097F00E7CF16"
+               BuildableName = "PHP Monitor.app"
+               BlueprintName = "PHP Monitor"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </BuildActionEntry>
+      </BuildActionEntries>
+   </BuildAction>
+   <TestAction
+      buildConfiguration = "Debug.Dev"
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      shouldUseLaunchSchemeArgsEnv = "YES"
+      codeCoverageEnabled = "YES">
+      <Testables>
+         <TestableReference
+            skipped = "NO"
+            parallelizable = "YES">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C4F7807825D7F84B000DBC97"
+               BuildableName = "Unit Tests.xctest"
+               BlueprintName = "Unit Tests"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </TestableReference>
+         <TestableReference
+            skipped = "NO"
+            parallelizable = "YES">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C471E7BB28F9B90F0021E251"
+               BuildableName = "UI Tests.xctest"
+               BlueprintName = "UI Tests"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </TestableReference>
+         <TestableReference
+            skipped = "NO">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C471E7AC28F9B4940021E251"
+               BuildableName = "Feature Tests.xctest"
+               BlueprintName = "Feature Tests"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </TestableReference>
+      </Testables>
+   </TestAction>
+   <LaunchAction
+      buildConfiguration = "Debug.Dev"
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      launchStyle = "0"
+      useCustomWorkingDirectory = "NO"
+      ignoresPersistentStateOnLaunch = "NO"
+      debugDocumentVersioning = "YES"
+      debugServiceExtension = "internal"
+      enableGPUValidationMode = "1"
+      allowLocationSimulation = "YES">
+      <BuildableProductRunnable
+         runnableDebuggingMode = "0">
+         <BuildableReference
+            BuildableIdentifier = "primary"
+            BlueprintIdentifier = "C41C1B3222B0097F00E7CF16"
+            BuildableName = "PHP Monitor.app"
+            BlueprintName = "PHP Monitor"
+            ReferencedContainer = "container:PHP Monitor.xcodeproj">
+         </BuildableReference>
+      </BuildableProductRunnable>
+      <CommandLineArguments>
+         <CommandLineArgument
+            argument = "--v"
+            isEnabled = "NO">
+         </CommandLineArgument>
+         <CommandLineArgument
+            argument = "--cli"
+            isEnabled = "NO">
+         </CommandLineArgument>
+         <CommandLineArgument
+            argument = "--configuration:~/.phpmon_fconf_working.json"
+            isEnabled = "NO">
+         </CommandLineArgument>
+         <CommandLineArgument
+            argument = "--configuration:~/.phpmon_fconf_broken.json"
+            isEnabled = "NO">
+         </CommandLineArgument>
+      </CommandLineArguments>
+      <EnvironmentVariables>
+         <EnvironmentVariable
+            key = "EXTREME_DOCTOR_MODE"
+            value = ""
+            isEnabled = "NO">
+         </EnvironmentVariable>
+         <EnvironmentVariable
+            key = "PAINT_PHPMON_SWIFTUI_VIEWS"
+            value = ""
+            isEnabled = "NO">
+         </EnvironmentVariable>
+      </EnvironmentVariables>
+   </LaunchAction>
+   <ProfileAction
+      buildConfiguration = "Release.Dev"
+      shouldUseLaunchSchemeArgsEnv = "YES"
+      savedToolIdentifier = ""
+      useCustomWorkingDirectory = "NO"
+      debugDocumentVersioning = "YES">
+      <BuildableProductRunnable
+         runnableDebuggingMode = "0">
+         <BuildableReference
+            BuildableIdentifier = "primary"
+            BlueprintIdentifier = "C41C1B3222B0097F00E7CF16"
+            BuildableName = "PHP Monitor.app"
+            BlueprintName = "PHP Monitor"
+            ReferencedContainer = "container:PHP Monitor.xcodeproj">
+         </BuildableReference>
+      </BuildableProductRunnable>
+   </ProfileAction>
+   <AnalyzeAction
+      buildConfiguration = "Debug.Dev">
+   </AnalyzeAction>
+   <ArchiveAction
+      buildConfiguration = "Release.Dev"
+      revealArchiveInOrganizer = "YES">
+   </ArchiveAction>
+</Scheme>

PHP Monitor.xcodeproj/xcshareddata/xcschemes/PHP Monitor.xcscheme

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <Scheme
-   LastUpgradeVersion = "1220"
-   version = "1.3">
+   LastUpgradeVersion = "1400"
+   version = "1.7">
    <BuildAction
       parallelizeBuildables = "YES"
       buildImplicitDependencies = "YES">
@@ -27,14 +27,42 @@
       selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
       selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
       shouldUseLaunchSchemeArgsEnv = "YES">
+      <TestPlans>
+         <TestPlanReference
+            reference = "container:PHP Monitor.xcodeproj/PHP Monitor.xctestplan"
+            default = "YES">
+         </TestPlanReference>
+      </TestPlans>
       <Testables>
          <TestableReference
             skipped = "NO">
             <BuildableReference
                BuildableIdentifier = "primary"
                BlueprintIdentifier = "C4F7807825D7F84B000DBC97"
-               BuildableName = "phpmon-tests.xctest"
-               BlueprintName = "phpmon-tests"
+               BuildableName = "Unit Tests.xctest"
+               BlueprintName = "Unit Tests"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </TestableReference>
+         <TestableReference
+            skipped = "NO"
+            parallelizable = "YES">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C471E7AC28F9B4940021E251"
+               BuildableName = "Feature Tests.xctest"
+               BlueprintName = "Feature Tests"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </TestableReference>
+         <TestableReference
+            skipped = "NO"
+            parallelizable = "YES">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C471E7BB28F9B90F0021E251"
+               BuildableName = "UI Tests.xctest"
+               BlueprintName = "UI Tests"
                ReferencedContainer = "container:PHP Monitor.xcodeproj">
             </BuildableReference>
          </TestableReference>
@@ -61,6 +89,29 @@
             ReferencedContainer = "container:PHP Monitor.xcodeproj">
          </BuildableReference>
       </BuildableProductRunnable>
+      <CommandLineArguments>
+         <CommandLineArgument
+            argument = "--v"
+            isEnabled = "NO">
+         </CommandLineArgument>
+      </CommandLineArguments>
+      <EnvironmentVariables>
+         <EnvironmentVariable
+            key = "EXTREME_DOCTOR_MODE"
+            value = ""
+            isEnabled = "NO">
+         </EnvironmentVariable>
+         <EnvironmentVariable
+            key = "SLOW_SHELL_MODE"
+            value = ""
+            isEnabled = "NO">
+         </EnvironmentVariable>
+         <EnvironmentVariable
+            key = "PAINT_PHPMON_SWIFTUI_VIEWS"
+            value = ""
+            isEnabled = "NO">
+         </EnvironmentVariable>
+      </EnvironmentVariables>
    </LaunchAction>
    <ProfileAction
       buildConfiguration = "Release"

PHP Monitor.xcodeproj/xcshareddata/xcschemes/Unit Tests.xcscheme

@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Scheme
+   LastUpgradeVersion = "1400"
+   version = "1.3">
+   <BuildAction
+      parallelizeBuildables = "YES"
+      buildImplicitDependencies = "YES">
+   </BuildAction>
+   <TestAction
+      buildConfiguration = "Debug"
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      shouldUseLaunchSchemeArgsEnv = "YES">
+      <Testables>
+         <TestableReference
+            skipped = "NO">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C4F7807825D7F84B000DBC97"
+               BuildableName = "Unit Tests.xctest"
+               BlueprintName = "Unit Tests"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </TestableReference>
+      </Testables>
+   </TestAction>
+   <LaunchAction
+      buildConfiguration = "Debug"
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      launchStyle = "0"
+      useCustomWorkingDirectory = "NO"
+      ignoresPersistentStateOnLaunch = "NO"
+      debugDocumentVersioning = "YES"
+      debugServiceExtension = "internal"
+      allowLocationSimulation = "YES">
+   </LaunchAction>
+   <ProfileAction
+      buildConfiguration = "Release"
+      shouldUseLaunchSchemeArgsEnv = "YES"
+      savedToolIdentifier = ""
+      useCustomWorkingDirectory = "NO"
+      debugDocumentVersioning = "YES">
+   </ProfileAction>
+   <AnalyzeAction
+      buildConfiguration = "Debug">
+   </AnalyzeAction>
+   <ArchiveAction
+      buildConfiguration = "Release"
+      revealArchiveInOrganizer = "YES">
+   </ArchiveAction>
+</Scheme>

README.md

@@ -1,46 +1,78 @@
-# PHP Monitor
+> **Note**
+> If this software has been useful to you, I ask that you **please star the repository**, that way I know that the software is being used. Also, please consider [sponsoring](https://nicoverbruggen.be/sponsor) to support the project, as this is something I make in my free time. **Thank you!** ⭐️
 
-> ⭐️ If this software has been useful to you, all I ask is that you **please star the repository**, so I know that the software is being used. You can also send me  [feedback](https://twitter.com/nicoverbruggen) if the app came in handy. Thank you! 😃
+<p align="center"><img src="./docs/logo.png" alt="PHP Monitor Logo" width="500px" /></p>
 
-<img src="./phpmon/Assets.xcassets/AppIcon.appiconset/icon_128x128@2x.png" alt="phpmon icon" width="128px" />
+**PHP Monitor** (or *phpmon*) is a lightweight macOS utility app that runs on your Mac and displays the active PHP version in your status bar. It's tightly integrated with [Laravel Valet](https://github.com/laravel/valet), so <u>you need to have it set up before you can use this app</u> (consult the FAQ below with info about how to set up your environment).
 
-PHP Monitor (or phpmon) is a lightweight macOS utility app that runs on your Mac and displays the active PHP version in your status bar.
+<img src="./docs/screenshot.jpg" width="1280px" alt="phpmon screenshot (menu bar app)"/>
 
-<img src="./docs/screenshot.png" width="389px" alt="phpmon screenshot (menu bar app)"/>
+<small><i>Screenshot: Showing the key functionality of PHP Monitor.</i></small>
 
-<small><i>Screenshot: A menu showing all of the functionality of PHP Monitor.</i></small>
-
-It's also super convenient to switch between different versions of PHP. You'll even get notifications (only if you choose to opt-in, of course)!
+It's super convenient to switch between different versions of PHP. You'll even get notifications (only if you choose to opt-in, of course)!
 
 <img src="./docs/notification.png" width="370px" alt="phpmon screenshot (notification)"/>
 
-It also gives you quick access to various useful functionality (like accessing configuration files, restarting services, and more).
+PHP Monitor also gives you quick access to various useful functionality (like accessing configuration files, restarting services, and more).
+
+You can also add new domains as links, isolate sites, manage various services, and perform First Aid to fix all kinds of common PHP link issues.
 
 ## 🖥 System requirements
 
-PHP Monitor is a universal application that runs on Apple Silicon **and** Intel-based Macs.
+PHP Monitor is a universal application that runs natively on Apple Silicon **and** Intel-based Macs.
 
-* macOS 10.14 Mojave or higher (works on macOS 11 Big Sur)
+* Your user account can administer your computer (required for some functionality, e.g. certificate generation)
+* macOS 12.4 or later (Monterey and Ventura are supported)
 * Homebrew is installed in `/usr/local/homebrew` or `/opt/homebrew`
-* The brew formula `php` has to be installed (which version is detected)
-* Laravel Valet 2.13 or higher
+* Homebrew `php` formula is installed
+* Laravel Valet (works with Valet v2, v3 and v4)
 
-_You may need to update your Valet installation to keep everything working if a major version update of PHP has been released._
+_You may need to update your Valet installation to keep everything working if a major version update of PHP has been released. You can do this by running `composer global update && valet install`. Some features are not supported when running Valet 2._
+
+For more information, please see [SECURITY.md](./SECURITY.md) to find out which version of the app is currently supported.
 
 ## 🚀 How to install
 
-You can install via Homebrew, or may download the latest [release](https://github.com/nicoverbruggen/phpmon/releases).
+Again, make sure you have **[Laravel Valet](https://laravel.com/docs/master/valet)** installed first:
 
-To install via Homebrew, run:
+```sh
+composer global require laravel/valet
+valet install
+valet trust
+```
 
-	brew tap nicoverbruggen/homebrew-cask
-	brew install --cask phpmon
+#### Manual installation (recommended, first time only)
 
-To upgrade your existing installation, run:
+Once that's done, you can [download the latest release](https://github.com/nicoverbruggen/phpmon/releases/latest), unzip it and place it in `/Applications`.
 
-	brew upgrade phpmon
+#### Installation via Homebrew
 
-_The app is signed and notarized, meaning all you have to do is approve its first launch._
+*Prior to version 5.8, this was the recommended way of installing PHP Monitor.*
+
+If you prefer to install the app via Homebrew, you can also run the following:
+
+```sh
+brew tap nicoverbruggen/homebrew-cask
+brew install --cask phpmon
+```
+
+## ⬆️ How to update
+
+The recommended method of updating the app to the latest version is to use **the built-in updater**.
+
+If you have a very slow internet connection, the updater may report that the download has timed out. In that case, you may wish to manually update by [downloading the latest release](https://github.com/nicoverbruggen/phpmon/releases/latest) and placing the app in `/Applications`.
+
+(You may also use Homebrew to update PHP Monitor, but this will require you to approve the app every time an update is installed. If you use the built-in updater, this won't be necessary.)
+
+## ⚡️ Launchers (Alfred, Raycast)
+
+If you would like to integrate with your launcher of choice, you can also download an [Alfred workflow](https://github.com/nicoverbruggen/phpmon/raw/main/integrations/phpmon.alfredworkflow) or [Raycast extension](https://www.raycast.com/nicoverbruggen/php-monitor) that works with PHP Monitor.
+
+The app must be running in the background for these to work, and the _Allow third-party integrations_ checkbox must be enabled in Preferences (it is by default).
+
+## 🔑 Is the app signed & notarized?
+
+Yes, the app is signed and notarized, meaning all you have to do is approve its first launch (or whenever it updates).
 
 ## 👨‍💻 Why build this?
 
@@ -50,15 +82,59 @@ Initially, I had an Alfred workflow for this — but it has now been replaced wi
 
 ## 🤬 The app won't start?!
 
-PHP Monitor performs some integrity checks to ensure a good experience when using the app. You'll get a message telling you that PHP Monitor won't work correctly in a variety of scenarios. 
+PHP Monitor performs some integrity checks to ensure a good experience when using the app. You'll get a message telling you that PHP Monitor won't work correctly in a variety of scenarios.
 
 **Follow instructions as specified in the alert in order to resolve any issues.**
 
+(If the app crashes at launch without showing you any of these messages, you might have a non-standard Homebrew and Valet setup. Those are not supported.)
+
 ## 🙋‍♂️ FAQ & Troubleshooting
 
 > If you are having issues, the first thing you should be doing is installing the latest version of PHP Monitor _and_ Laravel Valet. This can resolve a variety of issues. To upgrade Valet, run `composer global update`. Don't forget to run `valet install` after upgrading.
 
-If you're still having issues, here's a few common issues and solutions:
+If you're still having issues, here's a few common questions & answers, as well as issues and solutions:
+
+<details>
+<summary><strong>Which versions of PHP are supported?</strong></summary>
+
+All stable and supported PHP versions are also supported by PHP Monitor. However, depending on which version of Valet you have installed, which versions of PHP that are made available for switching purposes may differ.
+
+> **Note**
+> If you have versions of PHP installed that can be detected by PHP Monitor but is *not* supported by the currently active version of Valet, you will be alerted by an item in the menu with an exclamation mark emoji. (⚠️)
+
+Backports are available via [this tap](https://github.com/shivammathur/homebrew-php). For more information about those backports, please see the next FAQ entry.
+
+For maximum compatibility with older PHP versions, you may wish to keep using Valet 2 or 3. For more information, please see [SECURITY.md](./SECURITY.md) to find out which versions of PHP are supported with different versions of Valet.
+
+</details>
+
+<details>
+<summary><strong>How do I install additional versions of PHP, including legacy versions?</strong></summary>
+
+Assuming you have installed the `php` formula, the latest stable version of PHP is installed. At the time of writing, this is PHP 8.2.
+
+You can install other supported versions of PHP out of the box, so `php@8.0` and `php@8.1` at the time of writing.
+
+If you wish to install older (officially unsupported) versions of PHP for local use, you can do so by using [Shivam Mathur's tap](https://github.com/shivammathur/homebrew-php):
+
+```sh
+brew tap shivammathur/php
+```
+
+You may find that this tap is already in use: if you've used Valet before, it automatically uses this tap for legacy versions of PHP.
+
+```sh
+brew install shivammathur/php/php@7.4
+brew install shivammathur/php/php@7.3
+brew install shivammathur/php/php@7.2
+brew install shivammathur/php/php@7.1
+brew install shivammathur/php/php@7.0
+```
+
+**Always make sure to restart PHP Monitor after installing or upgrading PHP versions!**
+
+> *Note*: Using this tap may cause [temporary alias conflicts](https://github.com/nicoverbruggen/phpmon/issues/54#issuecomment-979789724) while the core tap alias and the tap's alias refer to a different version of PHP, but this is generally speaking a minor inconvenience, since this normally only applies when a new PHP version releases.
+</details>
 
 <details>
 <summary><strong>I want PHP Monitor to start up when I boot my Mac!</strong></summary>
@@ -71,14 +147,14 @@ Super convenient!
 <details>
 <summary><strong>I want to set up PHP Monitor from scratch! I don't have Homebrew installed either, where do I begin?</strong></summary>
 
-If you want to set up your computer for the very first time with PHP Monitor, here's how I do it:
+If you want to set up your computer for the very first time with PHP Monitor, here's how I do it.
 
-Install [Homebrew](https://brew.sh) first.
+**I have also created [a video tutorial](https://www.youtube.com/watch?v=fO3hVhkvm3w) which may be easier to follow. If you just want the terminal commands, keep reading.**
 
-Install PHP, composer, add to path:
+Install [Homebrew](https://brew.sh) first. Follow the instructions there first!
+
+Then, you'll need to set up your PATH. 
 
-    brew install php
-    brew install composer
     nano .zshrc
 
 Make sure the following line is not in the comments:
@@ -91,24 +167,93 @@ If you're on an Apple Silicon-based Mac, you'll need to add:
     # on an M1 Mac
     export PATH=$HOME/bin:/opt/homebrew/bin:$PATH
 
-and add the following to your .zshrc:
+and add the following to your `.zshrc` file, but add this BEFORE the homebrew PATH additions:
 
     export PATH=$HOME/bin:~/.composer/vendor/bin:$PATH
+    
+If you're adding `composer` and Homebrew binaries, ensure that Homebrew binaries are preferred by adding these to the path last. On my system, that looks like this:
+
+    export PATH=$HOME/bin:/usr/local/bin:$PATH
+    export PATH=$HOME/bin:~/.composer/vendor/bin:$PATH
+    export PATH=$HOME/bin:/opt/homebrew/bin:$PATH
+
+If you are *not* on Apple Silicon, you should remove the third line.
+
+Install the `php` and `composer` formulae:
+
+    brew install php composer
 
 Make sure PHP is linked correctly:
 
     which php
 
-should return: `/usr/local/bin/php` (or `/opt/homebrew/bin/php`)
+should return: `/usr/local/bin/php` (or `/opt/homebrew/bin/php` if you are on Apple Silicon)
 
     composer global require laravel/valet
+    
+For optimal results, you should lock your PHP platform for global dependencies to the oldest version of PHP you intend to run. If that version is PHP 7.0, your `~/.composer/composer.json` file could look like this (please adjust the version accordingly!):
+
+```
+{
+    "require": {
+        "laravel/valet": "^3.0",
+    },
+    "config": {
+        "platform": {
+            "php": "7.0"
+        }
+    }
+}
+```
+
+Run `composer global update` again. This ensures that when you switch to a different global PHP version, [Valet won't break](https://github.com/nicoverbruggen/phpmon/issues/178). If it does, PHP Monitor will let you know what you can do about this.
+
+Then, install Valet:
+    
     valet install
 
 This should install `dnsmasq` and set up Valet. Great, almost there!
 
     valet trust
 
-Finally, run PHP Monitor. Since the app is notarized and signed with a developer ID, it should work.
+You can now install PHP Monitor, if you haven't already:
+
+    brew tap nicoverbruggen/homebrew-cask
+	brew install --cask phpmon
+
+Finally, run PHP Monitor. Since the app is notarized and signed with a developer ID, it should work. You will need to approve the initial launch of the app, but you should be ready to go now.
+</details>
+
+<details>
+<summary><strong>How frequently does PHP Monitor check for updates?</strong></summary>
+
+PHP Monitor will check if an update is available every time you start the app.
+
+You can disable this behaviour by going to Preferences (via the PHP Monitor icon in the menu bar) and unchecking "Automatically check for updates". You can always check for updates manually.
+
+</details>
+
+<details>
+<summary><strong>I have PHP Monitor installed, and it works. I want to upgrade my PHP installations to the latest version, what's the best way to do this?</strong></summary>
+
+It's easy to make a mistake here, and end up with an unlinked version of PHP or have versions missing from PHP Monitor.
+
+Here's what I usually do:
+
+* Open PHP Monitor and select **First Aid & Services** > **Restore Homebrew Permissions**.
+* Close PHP Monitor after the pop-up tells you the permissions were restored.
+* Run `brew update-reset`
+* Run `brew upgrade`
+
+If after this, any PHP versions are missing in PHP Monitor, please run the following for the versions that are missing:
+
+* Run `brew uninstall php@x.x` (where `x.x` is the version)
+* Run `brew cleanup` (if you get any permission issues you may need to manually clean up the folder)
+* Run `brew install php@x.x` (where `x.x` is the version)
+
+You may still need to run `brew link php` after upgrading, too.
+
+That's it. Now start up PHP Monitor again and you should be golden!
 </details>
 
 <details>
@@ -132,8 +277,45 @@ This problem is usually resolved by upgrading Valet and running `valet install`
 
 	composer global update
 	valet install
+ 
+If you are seeing a 502 (Bad Gateway) error after about 30 seconds or so, your request is likely timing out. You may need to solve a performance issue with your own code.
 
 </details>
+
+<details>
+<summary><strong>PHP Monitor tells me my installation is broken, but I don't see why!</strong></summary>
+
+PHP Monitor tells you that a PHP installation is broken, if the configuration is causing warnings or errors when determining the version number.
+
+Since PHP Monitor changes the linked version via Homebrew, both Valet *and* your terminal (CLI) should use the new PHP version.
+
+However, this might not be the case on your system. You _might_ have a specific version of PHP linked if that is not the case. In that case, you may need to change your `.bashrc` or `.zshrc` file where the PATH is set (depending on the terminal you use).
+
+You can find out which version of PHP is being used by running `which php`.
+
+You can find out what exactly is causing the issue by running a command. On Intel, you can run (replace `7.4` with the version that is broken):
+
+```
+/usr/local/opt/php@7.4/bin/php -r "print phpversion();"
+```
+
+On Apple Silicon, you can run (replace `7.4` with the version that is broken):
+
+```
+/opt/homebrew/opt/php@7.4/bin/php -r "print phpversion();"
+```
+
+You should see an error or a warning here in the output. 
+
+Usually this is a duplicate extension declaration causing issues, or an extension that couldn't be loaded. You'll have to solve that issue yourself (usually by removing the offending extension or reinstalling).
+
+</details>
+
+<details>
+<summary><strong>The option to isolate a site is disabled! What's going on?</strong></summary>
+
+Make sure you have at least **Valet 3.0** installed, since support for isolation was added in this version of Valet. (Please note that this version of Valet drops support for PHP 5.6.)
+</details>
 	
 <details>
 <summary><strong>One of the limits (memory limit, max POST size, max upload size) shows an exclamation mark!</strong></summary>
@@ -149,7 +331,7 @@ You must a provide a value like so: `1024K`, `256M`, `1G`. Alternatively, `-1` i
 <details>
 <summary><strong>One of my commented out extensions is not being detected...</strong></summary>
 
-The app searches in the relevant `php.ini` file for a specific pattern. For regular extensions:
+The app searches in the relevant `.ini` files for a specific pattern. For regular extensions:
 
 * `extension="*.so"`
 * `; extension="*.so"`
@@ -160,46 +342,259 @@ For Zend extensions:
 * `; zend_extension="*.so"`
 
 The `*` is a wildcard and the name of the extension. If you've commented out the extension, make sure you've commented it out with a semicolon (;) and a single space after the semicolon for PHP Monitor to detect it.
+
+Since v3.4 all of the loaded .ini files are sourced to determine which extensions are enabled.
+
 </details>
 
 <details>
 <summary><strong>I've got two Homebrew installations on my Apple Silicon Mac, can I choose which installation to use with PHP Monitor?</strong></summary>
 
-Not at this time, no. PHP Monitor will prefer the `/opt/homebrew` installation over the classic installation directory.
+If you are using PHP Monitor on an Intel machine or on an Apple Silicon machine with Rosetta enabled, PHP Monitor expects the main Homebrew binary in `/usr/local/bin/brew`.
 
+If you are using PHP Monitor on Apple Silicon without Rosetta, PHP Monitor expects the main Homebrew binary in `/opt/homebrew/bin/brew`.
+
+If there's an issue here, you'll get an alert at launch.
+
+Make sure that the version of Homebrew that you are running normally is the same as the one that PHP Monitor expects. If you are on M1 hardware for example, but still using Rosetta for Homebrew, you'll need to run PHP Monitor under Rosetta as well. 
+
+PHP Monitor is a universal app and supports both architectures, so [find out here](https://support.apple.com/en-us/HT211861) how to enable Rosetta with PHP Monitor.
 </details>
 
 <details>
 <summary><strong>Why is the app doing network requests?</strong></summary>
 
-It's Homebrew. I can't prevent `brew` from doing things via the network when I invoke it.
+The app will automatically check for updates, which is the most likely culprit. 
 
-PHP Monitor itself doesn't do any network requests. Feel free to check the source code or intercept the traffic, if you don't believe me.
+This happens at launch (unless disabled), and the app directly checks the Caskfile hosted on GitHub. This data is not, and will not be used for analytics (and, as far as I can tell, cannot).
+
+I also can't prevent `brew` from doing things via the network when PHP Monitor uses the binary.
+
+The app includes an Internet Access Policy file, so if you're using something like Little Snitch there should be a description why these calls occur.
 
 </details>
 
 <details>
-<summary><strong>After running PHP Monitor, Homebrew sometimes has issues with `brew upgrade`!</strong></summary>
+<summary><strong>How do I various presets to show up?</strong></summary>
 
-This is a security feature of Brew. When you start a service as an administrator, the root user becomes the owner of relevant binaries. 
+You must set these presets up in a JSON file, located in `~/.config/phpmon/config.json`. 
 
-You will need to manually clean up those folders yourself using `rm -rf` or by manually removing those folders via Finder.
+You must have set up at least one valid preset for this presets to work in PHP Monitor.
+
+Here's an example of a working preset:
+
+<pre>
+{
+    "scan_apps": [],
+    "services": [],
+    "presets": [
+        {
+            "name": "Legacy Project",
+            "php": "8.0",
+            "extensions": {
+                "xdebug": false
+            },
+            "configuration": {
+                "memory_limit": "128M",
+                "upload_max_filesize": "128M",
+                "post_max_size": "128M"
+            }
+        }
+    ],
+    "export": {}
+}
+</pre>
+
+You can omit the `php` key in the preset if you do not wish for the preset to switch to a given PHP version.
+
+> **Warning**
+> You must restart PHP Monitor for these changes to be detected.
+</details>
+
+<details>
+<summary><strong>How do I ensure additional Homebrew services are shown in the app?</strong></summary>
+
+You must set these services up in a JSON file, located in `~/.config/phpmon/config.json`. 
+
+You can specify custom services in the configuration file for Homebrew services that run as your own user (not root). 
+
+> **Info**
+> If your service must run as root, it cannot currently be added to PHP Monitor.
+
+You can find out which services are available by running `brew services list`. 
+
+Here's an example where we add the `mailhog` and `mysql` services to PHP Monitor:
+
+<pre>
+{
+    "scan_apps": [],
+    "services": ["mailhog", "mysql"],
+    "presets": [],
+    "export": {}
+}
+</pre>
+
+> **Warning**
+> You must restart PHP Monitor for these changes to be detected.
+</details>
+
+<details>
+<summary><strong>How do I set custom environment variables?</strong></summary>
+
+You must configure these custom environment variables up in a JSON file, located in `~/.config/phpmon/config.json`. 
+
+PHP Monitor uses a default Shell environment, with no custom environment variables. You need to set custom environment variables manually. These are then used for e.g. Composer.
+
+Here's an example of a working `COMPOSER_HOME` environment variable which is respected:
+
+<pre>
+{
+    "scan_apps": [],
+    "services": [],
+    "presets": [],
+    "export": {
+        "COMPOSER_HOME": "/absolute/path/to/composer/folder"
+    }
+}
+</pre>
+
+> **Warning**
+> You must restart PHP Monitor for these changes to be detected.
 
 </details>
 
-## 📝 Another issue?
+<details>
+<summary><strong>How do I get various applications to show up in the domain list's right-click menu?</strong></summary>
+
+When you select and right-click on a domain, you can open these directories with various applications. This can help speed up your workflow. However, for these apps to show up, they must be detected first.
+
+The supported apps are: <i>PhpStorm, Visual Studio Code, Sublime Text, Sublime Merge, iTerm</i>.
+
+All of these apps should just be detected correctly, no matter their location on your system. If you can open it using `open -a "appname"`, the app should be detected and work. If you have renamed the app, there might be an issue getting it detected.
+
+To see which files are checked to determine availability, see [this file](./phpmon/Domain/Helpers/Application.swift).
+
+You can add your own apps by creating and editing a `~/.config/phpmon/config.json` file, and make sure the `scan_apps` key is set:
+
+<pre>
+{
+    "scan_apps": ["Xcode", "Kraken"]
+}
+</pre>
+
+You can put as many apps as you'd like in the `scan_apps` array, and PHP Monitor will check for the existence of these apps. You do not need to set the full path, just the name of the app should work. Not all apps support opening a folder, though, so your success might vary.
+
+> **Warning**
+> You must restart PHP Monitor for these changes to be detected.
+</details>
+
+<details>
+<summary><strong>How can the app integrate with third party tools, like Alfred or Raycast?</strong></summary>
+
+PHP Monitor supports third party app integrations by default, and this feature is enabled in Preferences unless you disable it.
+
+You can grab the official [Alfred workflow](https://github.com/nicoverbruggen/phpmon/raw/main/integrations/phpmon.alfredworkflow) or [Raycast extension](https://www.raycast.com/nicoverbruggen/php-monitor).
+
+If you'd like to integrate something yourself, all you need to to is use the `phpmon://` protocol and ensure that third party app integrations are enabled in Preferences (in PHP Monitor).
+
+Using app callbacks, macOS and PHP Monitor allow for the following to be called:
+
+* phpmon://list
+* phpmon://services/stop
+* phpmon://services/restart/all
+* phpmon://services/restart/nginx
+* phpmon://services/restart/php
+* phpmon://services/restart/dnsmasq
+* phpmon://locate/config
+* phpmon://locate/composer
+* phpmon://locate/valet
+* phpmon://phpinfo
+* phpmon://switch/php/{version}
+
+</details>
+
+<details>
+<summary><strong>How does the app know what PHP version is required for my app?</strong></summary>
+
+The `composer.json` file in the root of the folder (if it exists) is scanned and interpreted.
+
+If the version is set in `platform`, it takes precendence.
+If the version is not set in `platform` but it is in `require` (most common) then that version is used.
+</details>
+
+<details>
+<summary><strong>What do the checkmarks next to the PHP version mean in the site list?</strong></summary>
+
+You'll see a checkmark next to the version number if the currently enabled PHP version is compatible with the version required to run the site. 
+
+This is determined by evaluating the PHP requirement constraint (e.g. `^8.0`, `~8.0` or a specific version: `8.0`).
+</details>
+
+<details>
+<summary><strong>Why can't I see the driver type any more? It says "Project Type" now.</strong></summary>
+
+PHP Monitor currently checks your `composer.json` file to try to figure out what project you are running. 
+
+This approach is a lot faster than asking for a driver when you have many sites linked, but is slightly less reliable since the framework or type of project inferred via `composer.json` might not be 100% accurate.
+
+You can always still ask Valet using the command line, should it be necessary. In my experience fetching the drivers slowed down the app unnecessarily.
+
+</details>
+
+<details>
+<summary><strong>After running PHP Monitor, Homebrew sometimes has issues with `brew upgrade` or `brew cleanup`!</strong></summary>
+
+You can now use **First Aid & Services > Restore Homebrew Permissions** to (temporarily) resolve this issue and allow for a clean and painless `brew upgrade` or `brew cleanup` process.
+
+If you would like to know more, consult [this issue](https://github.com/nicoverbruggen/phpmon/issues/85) for more information about why this is needed.
+
+</details>
+
+<details>
+<summary><strong>The app has crashed!</strong></summary>
+
+Please get in touch and open an issue. PHP Monitor shouldn't crash... (unless you are actually removing PHP *while* the app is running, that’s considered normal behaviour!)
+
+If you would like to report a crash, please include the associated **log files** so I can find out what exactly went wrong.
+
+To find the logs, take a look in `~/Library/Logs/DiagnosticReports` (in Finder) and see if there's any (log) files that start with "PHP Monitor".
+
+Additionally, you can help me figure out even more information by sending me your verbose log for your latest session of PHP Monitor. Logging is disabled by default. 
+
+You can start extra verbose logging by running: `touch ~/.config/phpmon/verbose` and restarting PHP Monitor. You can find the latest log in: `~/.config/phpmon/last_session.log`. Please attach it to the relevant bug report.
+
+</details>
+
+## 📝 Having another issue?
 
 I did not include any tracking or analytics software, so if you encounter issues, let me know [via an issue](https://github.com/nicoverbruggen/phpmon/issues/new).
 
 ## 💵 Support me?
 
-I usually develop this application in my spare time, after work. If you find the application useful and you have a bit of money to spare, feel free to send me [a tip via PayPal](https://paypal.me/nicoverbruggen).
+PHP Monitor is available entirely **free of charge**, but if you can afford it a donation helps keep the project alive and the app maintained.
+
+You can find a [sponsor](https://nicoverbruggen.be/sponsor) link at the top of this repo or you could click the link here to be taken to my sponsorship page.
+
+Donations really help with the Apple Developer Program cost, and keep me motivated to keep working on PHP Monitor outside of work hours (I do have a day job!).
+
+## 😎 Acknowledgements
+
+Special thanks go out to:
+
+* Everyone supporting me via [GitHub Sponsors](https://github.com/sponsors/nicoverbruggen)
+* Everyone who has donated via [my sponsor page](https://nicoverbruggen.be/sponsor)
+* The [Homebrew](https://brew.sh/) team & [Valet maintainers](https://github.com/laravel/valet/graphs/contributors)
+* Various folks who [reached](https://twitter.com/stauffermatt) [out](https://twitter.com/marcelpociot) when PHP Monitor was still very much a small app with a handful of stars or so
+* Everyone who has left feedback and reported bugs
+* Everyone in the Laravel community who shared the app, especially on Twitter
+
+Thank you very much for your contributions, kind words and support.
 
 ## 🚜 How it works
 
 ### Loading info about PHP in the background
 
-This utility runs `php -r 'print phpversion()'` in the background periodically. It also checks your `.ini` files for extensions and loads more information about your limits (memory limit, POST limit, upload limit). 
+This utility runs `php-config --version` in the background periodically. It also checks your `.ini` files for extensions and loads more information about your limits (memory limit, POST limit, upload limit). 
 
 In order to save power, this only happens once every 60 seconds.
 
@@ -207,35 +602,33 @@ In order to save power, this only happens once every 60 seconds.
 
 This utility will detect which PHP versions you have installed via Homebrew, and then allows you to switch between them.
 
-This means:
+The switcher will disable all PHP-FPM services not belonging to the version you wish to use, and link the desired version of PHP. Then, it'll restart your desired PHP version's FPM process. This all happens in parallel, so this should be a bit faster than Valet’s switcher.
 
-- You have at least the latest version of PHP installed (`php`)
-- You have installed Laravel Valet (`which valet` returns `/usr/local/bin/valet`)
-- You ran `valet trust`, which means Valet commands can be run without using sudo
+If you're using Valet 3, versions of PHP-FPM required to keep isolated sites up and running will also be started or stopped as needed.
 
-The utility runs the following commands:
+### Config change detection
 
-- Unlink all detected PHP versions
-- Switch to whatever version of PHP `php` is at (this is done to ensure that Valet works, even when attempting to use PHP 5.6)
-- Stop all relevant services (`php`, `nginx`)
-- Link the desired version of PHP
-- Start the correct `php` service for the desired PHP version
+PHP Monitor watches your filesystem in the relevant `conf.d` directory for the currently linked PHP version. 
+
+Whenever an .ini file is modified, PHP Monitor will attempt to reload the current information about the active PHP installation. 
+
+If an extension or other process writes to a single file a bunch of times in a short span of time (&lt; 1 sec), PHP Monitor will only reload the active configuration information after a while (with a slight delay).
+
+### Site detection
+
+1. **Location of your sites**: PHP Monitor uses the Valet configuration file to determine which folders to look into. Each folder is scanned and then PHP Monitor will validate if a composer.json file exists to determine the desired PHP version.
+1. **Sites secured or not secured**: Whether the directory has been secured is determined by checking if a matching certificate exists under Valet's `Certificates` directory for that site name.
+1. **Project type**: PHP Monitor checks your `composer.json` file for "notable dependencies". If you have `laravel/framework` in your `require`, there's a good chance the project type is `Laravel`, after all.
+
+> **Note**
+> If you have linked a folder in Documents, Desktop or Downloads you might need to grant PHP Monitor access to those directories for PHP Monitor to work correctly.
 
 ### Want to know more?
 
-If you want to know more about how this works, I recommend you check out the source code. 
+If you want to know more about how this works, I recommend you check out the source code.
 
-This app isn't very complicated after all. In the end, this just (conveniently) executes some shell commands.
+I have done my best to annotate as much as humanly possible, and have avoided using an overly complicated architecture to keep the code as easy to maintain as possible. The code isn't perfect by a long shot (lots of cleanup can still happen!) but the application works well.
 
-## 🔧 Build instructions
+I also have a few tests for key parts of the application that I found needed to be tested. In the future, I would like to add even more tests for some of the UI stuff, but for now the tests are more unit tests than feature tests.
 
-<img src="./docs/build.png" width="320px" alt="build button in Xcode"/>
-
-If you'd like to build PHP Monitor yourself, you need:
-
-* Xcode (usually the latest version)
-* The contents of this repository
-
-Once you have downloaded this repository, open `PHP Monitor.xcodeproj`, and you should be able to immediately build the app for your system by pressing Cmd-R. This will create a debug build. (If Xcode complains about code signing, you can turn it off.)
-
-If you'd like to create a production build, choose "Any Mac" as the target and select Product > Archive.
+For more detailed information for developers, please see [the documentation file for developers](./DEVELOPER.md).

RELEASE.md

@@ -1,13 +0,0 @@
-# Release Procedure
-
-1. Merge into `main`
-2. Create tag
-3. Add changes to changelog + update security document
-4. Archive
-5. Notarize and prepare for own distribution
-6. After notarization, export .app
-7. Create zipped version
-8. Calculate SHA256: `openssl dgst -sha256 phpmon.zip`
-9. Upload to GitHub and add to tagged release
-10. Update Cask with new version + hash
-11. Check new version can be installed via Cask

SECURITY.md

@@ -2,15 +2,28 @@
 
 ## Supported versions
 
-Generally speaking, only the latest version of **PHP Monitor** is supported:
+Generally speaking, only the latest version of **PHP Monitor** is supported, except during transition periods (for example, when particular system requirements go up):
 
-| Version | Apple Silicon | Supported          | Supported macOS | Deployment Target |
-| ------- | ------------- | ------------------ | ----- | ----- |
-| 3.x     | ✅ Universal binary | ✅ | Big Sur (11.0) | macOS 10.14+ |
-| 2.6     | ✅ Universal binary | ❌ | Big Sur (11.0) | macOS 10.14+ |
-| 2.5     | ✴️ Universal binary<br/>`/usr/local/homebrew` installations only | ❌ | Big Sur (11.0)<br/>Catalina (10.15) | macOS 10.14+ |
-| 2.4     | ✴️ Universal binary<br/>`/usr/local/homebrew` installations only | ❌ | Big Sur (11.0)<br/>Catalina (10.15) | macOS 10.14+ |
-| < 2.4   | ❌ Intel binary<br/>`/usr/local/homebrew` installations only | ❌ | Catalina (10.15) | macOS 10.14+ |
+| Version | Apple Silicon | Supported          | Supported macOS | Deployment Target | Detected PHP Versions | Recommended Valet Version |
+| ------- | ------------- | ------------------ | ----- | ----- | ----- | ----
+| 5.8       | ✅ Universal binary | ✅ Yes | Monterey (12.4+)<br/>Ventura (13.0+) | macOS 12.4 | PHP 5.6—PHP 8.2 (w/ Valet 2.x)<br/>PHP 7.0—PHP 8.2 (w/ Valet 3.x)<br/>PHP 7.1-PHP 8.2 (w/ Valet 4.x) | 3.0 or higher recommended<br/> 2.16.2 minimum |
+
+## Legacy versions
+
+These versions of PHP Monitor are no longer supported, but if you’re using an older computer with an older version of Homebrew, Valet or macOS, you might want to use one of these versions.
+
+| Version | Apple Silicon | Supported          | Supported macOS | Deployment Target | Detected PHP Versions | Minimum Required Valet Version |
+| ------- | ------------- | ------------------ | ----- | ----- | ----- | ----
+| 5.7       | ✅ Universal binary | ❌ | Big Sur (11.0)<br/>Monterey (12.0)<br/>Ventura (13.0) | macOS 11+ | PHP 5.6—PHP 8.2 (w/ Valet 2.x)<br/>PHP 7.0—PHP 8.2 (w/ Valet 3.x) | 3.0 recommended<br/> 2.16.2 minimum |
+| 5.6       | ✅ Universal binary | ❌ | Big Sur (11.0)<br/>Monterey (12.0)<br/>Ventura (13.0) | macOS 11+ | PHP 5.6—PHP 8.2 (w/ Valet 2.x)<br/>PHP 7.0—PHP 8.2 (w/ Valet 3.x) | 3.0 recommended<br/> 2.16.2 minimum |
+| 4.1       | ✅ Universal binary | ❌ | Big Sur (11.0)<br/>Monterey (12.0) | macOS 11+ | PHP 5.6—PHP 8.2 | 2.16.2 |
+| 4.0       | ✅ Universal binary | ❌ | Big Sur (11.0)<br/>Monterey (12.0) | macOS 10.14+ | PHP 5.6—PHP 8.2 | 2.13 |
+| 3.5       | ✅ Universal binary | ❌ | Big Sur (11.0)<br/>Monterey (12.0) | macOS 10.14+ | PHP 5.6—PHP 8.2 | 2.13 |
+| 3.0—3.4   | ✅ Universal binary | ❌ | Big Sur (11.0) | macOS 10.14+ | PHP 5.6—PHP 8.1 | 2.13 |
+| 2.6       | ✅ Universal binary | ❌ | Big Sur (11.0) | macOS 10.14+ | PHP 5.6—PHP 8.0 | 2.13 |
+| 2.5       | ✴️ Universal binary<br/>`/usr/local/homebrew` installations only | ❌ | Big Sur (11.0)<br/>Catalina (10.15) | macOS 10.14+ | not applicable | not applicable |
+| 2.4       | ✴️ Universal binary<br/>`/usr/local/homebrew` installations only | ❌ | Big Sur (11.0)<br/>Catalina (10.15) | macOS 10.14+ | not applicable | not applicable |
+| < 2.4     | ❌ Intel binary<br/>`/usr/local/homebrew` installations only | ❌ | Catalina (10.15) | macOS 10.14+ | not applicable | not applicable | 
 
 ## Reporting a vulnerability
 

phpmon-tests/BrewJsonParserTest.swift

@@ -1,28 +0,0 @@
-//
-//  BrewJsonParserTest.swift
-//  phpmon-tests
-//
-//  Created by Nico Verbruggen on 14/02/2021.
-//  Copyright © 2021 Nico Verbruggen. All rights reserved.
-//
-
-import XCTest
-
-class BrewJsonParserTest: XCTestCase {
-
-    static var jsonBrewFile: URL {
-        return Bundle(for: Self.self).url(forResource: "brew", withExtension: "json")!
-    }
-
-    func testCanLoadExtension() throws {
-        let json = try? String(contentsOf: Self.jsonBrewFile, encoding: .utf8)
-        let package = try! JSONDecoder().decode(
-            [HomebrewPackage].self, from: json!.data(using: .utf8)!
-        ).first!
-        
-        XCTAssertEqual(package.name, "php")
-        XCTAssertEqual(package.full_name, "php")
-        XCTAssertEqual(package.aliases.first!, "php@8.0")
-    }
-
-}

phpmon-tests/ExtensionParserTest.swift

@@ -1,56 +0,0 @@
-//
-//  ExtensionParserTest.swift
-//  phpmon-tests
-//
-//  Created by Nico Verbruggen on 13/02/2021.
-//  Copyright © 2021 Nico Verbruggen. All rights reserved.
-//
-
-import XCTest
-
-class ExtensionParserTest: XCTestCase {
-    
-    static var phpIniFileUrl: URL {
-        return Bundle(for: Self.self).url(forResource: "php", withExtension: "ini")!
-    }
-
-    func testCanLoadExtension() throws {
-        let extensions = PhpExtension.load(from: Self.phpIniFileUrl)
-        
-        XCTAssertGreaterThan(extensions.count, 0)
-    }
-    
-    func testExtensionNameIsCorrect() throws {
-        let extensions = PhpExtension.load(from: Self.phpIniFileUrl)
-        
-        XCTAssertEqual(extensions.first!.name, "xdebug")
-        XCTAssertEqual(extensions.last!.name, "imagick")
-    }
-    
-    func testExtensionStatusIsCorrect() throws {
-        let extensions = PhpExtension.load(from: Self.phpIniFileUrl)
-        
-        XCTAssertEqual(extensions.first!.enabled, true)
-        XCTAssertEqual(extensions.last!.enabled, false)
-    }
-    
-    func testToggleWorksAsExpected() throws {
-        let destination = Utility.copyToTemporaryFile(resourceName: "php", fileExtension: "ini")!
-        let extensions = PhpExtension.load(from: destination)
-        XCTAssertEqual(extensions.count, 2)
-        
-        // Try to disable it!
-        let xdebug = extensions.first!
-        XCTAssertEqual(xdebug.enabled, true)
-        xdebug.toggle()
-        XCTAssertEqual(xdebug.enabled, false)
-        
-        // Check if the file contains the appropriate data
-        let file = try! String(contentsOf: destination, encoding: .utf8)
-        XCTAssertTrue(file.contains("; zend_extension=\"xdebug.so\""))
-        
-        // Make sure if we load the data again, it's disabled
-        XCTAssertEqual(PhpExtension.load(from: destination).first!.enabled, false)
-    }
-
-}

phpmon-tests/Info.plist

@@ -1,22 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
-<plist version="1.0">
-<dict>
-	<key>CFBundleDevelopmentRegion</key>
-	<string>$(DEVELOPMENT_LANGUAGE)</string>
-	<key>CFBundleExecutable</key>
-	<string>$(EXECUTABLE_NAME)</string>
-	<key>CFBundleIdentifier</key>
-	<string>$(PRODUCT_BUNDLE_IDENTIFIER)</string>
-	<key>CFBundleInfoDictionaryVersion</key>
-	<string>6.0</string>
-	<key>CFBundleName</key>
-	<string>$(PRODUCT_NAME)</string>
-	<key>CFBundlePackageType</key>
-	<string>$(PRODUCT_BUNDLE_PACKAGE_TYPE)</string>
-	<key>CFBundleShortVersionString</key>
-	<string>1.0</string>
-	<key>CFBundleVersion</key>
-	<string>1</string>
-</dict>
-</plist>

phpmon-tests/brew.json

@@ -1,332 +0,0 @@
-[
-    {
-        "name":"php",
-        "full_name":"php",
-        "tap":"homebrew/core",
-        "oldname":null,
-        "aliases":[
-            "php@8.0"
-        ],
-        "versioned_formulae":[
-            "php@7.4",
-            "php@7.3",
-            "php@7.2"
-        ],
-        "desc":"General-purpose scripting language",
-        "license":"PHP-3.01",
-        "homepage":"https://www.php.net/",
-        "versions":{
-            "stable":"8.0.2",
-            "head":"HEAD",
-            "bottle":true
-        },
-        "urls":{
-            "stable":{
-                "url":"https://www.php.net/distributions/php-8.0.2.tar.xz",
-                "tag":null,
-                "revision":null
-            }
-        },
-        "revision":0,
-        "version_scheme":0,
-        "bottle":{
-            "stable":{
-                "rebuild":0,
-                "cellar":"/opt/homebrew/Cellar",
-                "prefix":"/opt/homebrew",
-                "root_url":"https://homebrew.bintray.com/bottles",
-                "files":{
-                    "arm64_big_sur":{
-                        "url":"https://homebrew.bintray.com/bottles/php-8.0.2.arm64_big_sur.bottle.tar.gz",
-                        "sha256":"cbefa1db73d08b9af4593a44512b8d727e43033ee8517736bae5f16315501b12"
-                    },
-                    "big_sur":{
-                        "url":"https://homebrew.bintray.com/bottles/php-8.0.2.big_sur.bottle.tar.gz",
-                        "sha256":"6857142e12254b15da4e74c2986dd24faca57dac8d467b04621db349e277dd63"
-                    },
-                    "catalina":{
-                        "url":"https://homebrew.bintray.com/bottles/php-8.0.2.catalina.bottle.tar.gz",
-                        "sha256":"b651611134c18f93fdf121a4277b51b197a896a19ccb8020289b4e19e0638349"
-                    },
-                    "mojave":{
-                        "url":"https://homebrew.bintray.com/bottles/php-8.0.2.mojave.bottle.tar.gz",
-                        "sha256":"9583a51fcc6f804aadbb14e18f770d4fb4973deaed6ddc4770342e62974ffbca"
-                    }
-                }
-            }
-        },
-        "keg_only":false,
-        "bottle_disabled":false,
-        "options":[
-            
-        ],
-        "build_dependencies":[
-            "httpd",
-            "pkg-config"
-        ],
-        "dependencies":[
-            "apr",
-            "apr-util",
-            "argon2",
-            "aspell",
-            "autoconf",
-            "curl",
-            "freetds",
-            "gd",
-            "gettext",
-            "glib",
-            "gmp",
-            "icu4c",
-            "krb5",
-            "libffi",
-            "libpq",
-            "libsodium",
-            "libzip",
-            "oniguruma",
-            "openldap",
-            "openssl@1.1",
-            "pcre2",
-            "sqlite",
-            "tidy-html5",
-            "unixodbc"
-        ],
-        "recommended_dependencies":[
-            
-        ],
-        "optional_dependencies":[
-            
-        ],
-        "uses_from_macos":[
-            {
-                "xz":"build"
-            },
-            "bzip2",
-            "libedit",
-            "libxml2",
-            "libxslt",
-            "zlib"
-        ],
-        "requirements":[
-            
-        ],
-        "conflicts_with":[
-            
-        ],
-        "caveats":"To enable PHP in Apache add the following to httpd.conf and restart Apache:\n    LoadModule php_module $(brew --prefix)/opt/php/lib/httpd/modules/libphp.so\n\n    <FilesMatch \\.php$>\n        SetHandler application/x-httpd-php\n    </FilesMatch>\n\nFinally, check DirectoryIndex includes index.php\n    DirectoryIndex index.php index.html\n\nThe php.ini and php-fpm.ini file can be found in:\n    $(brew --prefix)/etc/php/8.0/\n",
-        "installed":[
-            {
-                "version":"8.0.2",
-                "used_options":[
-                    
-                ],
-                "built_as_bottle":true,
-                "poured_from_bottle":true,
-                "runtime_dependencies":[
-                    {
-                        "full_name":"apr",
-                        "version":"1.7.0"
-                    },
-                    {
-                        "full_name":"openssl@1.1",
-                        "version":"1.1.1i"
-                    },
-                    {
-                        "full_name":"apr-util",
-                        "version":"1.6.1"
-                    },
-                    {
-                        "full_name":"argon2",
-                        "version":"20190702"
-                    },
-                    {
-                        "full_name":"aspell",
-                        "version":"0.60.8"
-                    },
-                    {
-                        "full_name":"autoconf",
-                        "version":"2.69"
-                    },
-                    {
-                        "full_name":"brotli",
-                        "version":"1.0.9"
-                    },
-                    {
-                        "full_name":"gettext",
-                        "version":"0.21"
-                    },
-                    {
-                        "full_name":"libunistring",
-                        "version":"0.9.10"
-                    },
-                    {
-                        "full_name":"libidn2",
-                        "version":"2.3.0"
-                    },
-                    {
-                        "full_name":"libmetalink",
-                        "version":"0.1.3"
-                    },
-                    {
-                        "full_name":"libssh2",
-                        "version":"1.9.0"
-                    },
-                    {
-                        "full_name":"c-ares",
-                        "version":"1.17.1"
-                    },
-                    {
-                        "full_name":"jemalloc",
-                        "version":"5.2.1"
-                    },
-                    {
-                        "full_name":"libev",
-                        "version":"4.33"
-                    },
-                    {
-                        "full_name":"nghttp2",
-                        "version":"1.43.0"
-                    },
-                    {
-                        "full_name":"openldap",
-                        "version":"2.4.57"
-                    },
-                    {
-                        "full_name":"rtmpdump",
-                        "version":"2.4+20151223"
-                    },
-                    {
-                        "full_name":"zstd",
-                        "version":"1.4.8"
-                    },
-                    {
-                        "full_name":"curl",
-                        "version":"7.75.0"
-                    },
-                    {
-                        "full_name":"libtool",
-                        "version":"2.4.6"
-                    },
-                    {
-                        "full_name":"unixodbc",
-                        "version":"2.3.9"
-                    },
-                    {
-                        "full_name":"freetds",
-                        "version":"1.2.18"
-                    },
-                    {
-                        "full_name":"libpng",
-                        "version":"1.6.37"
-                    },
-                    {
-                        "full_name":"freetype",
-                        "version":"2.10.4"
-                    },
-                    {
-                        "full_name":"fontconfig",
-                        "version":"2.13.1"
-                    },
-                    {
-                        "full_name":"jpeg",
-                        "version":"9d"
-                    },
-                    {
-                        "full_name":"libtiff",
-                        "version":"4.2.0"
-                    },
-                    {
-                        "full_name":"webp",
-                        "version":"1.2.0"
-                    },
-                    {
-                        "full_name":"gd",
-                        "version":"2.3.1"
-                    },
-                    {
-                        "full_name":"libffi",
-                        "version":"3.3"
-                    },
-                    {
-                        "full_name":"pcre",
-                        "version":"8.44"
-                    },
-                    {
-                        "full_name":"gdbm",
-                        "version":"1.18.1"
-                    },
-                    {
-                        "full_name":"readline",
-                        "version":"8.1"
-                    },
-                    {
-                        "full_name":"sqlite",
-                        "version":"3.34.0"
-                    },
-                    {
-                        "full_name":"tcl-tk",
-                        "version":"8.6.11"
-                    },
-                    {
-                        "full_name":"xz",
-                        "version":"5.2.5"
-                    },
-                    {
-                        "full_name":"python@3.9",
-                        "version":"3.9.1"
-                    },
-                    {
-                        "full_name":"glib",
-                        "version":"2.66.6"
-                    },
-                    {
-                        "full_name":"gmp",
-                        "version":"6.2.1"
-                    },
-                    {
-                        "full_name":"icu4c",
-                        "version":"67.1"
-                    },
-                    {
-                        "full_name":"krb5",
-                        "version":"1.19"
-                    },
-                    {
-                        "full_name":"libpq",
-                        "version":"13.1"
-                    },
-                    {
-                        "full_name":"libsodium",
-                        "version":"1.0.18"
-                    },
-                    {
-                        "full_name":"libzip",
-                        "version":"1.7.3"
-                    },
-                    {
-                        "full_name":"oniguruma",
-                        "version":"6.9.6"
-                    },
-                    {
-                        "full_name":"pcre2",
-                        "version":"10.36"
-                    },
-                    {
-                        "full_name":"tidy-html5",
-                        "version":"5.6.0"
-                    }
-                ],
-                "installed_as_dependency":false,
-                "installed_on_request":true
-            }
-        ],
-        "linked_keg":"8.0.2",
-        "pinned":false,
-        "outdated":false,
-        "deprecated":false,
-        "deprecation_date":null,
-        "deprecation_reason":null,
-        "disabled":false,
-        "disable_date":null,
-        "disable_reason":null
-    }
-]

phpmon/AppDelegate.swift

@@ -1,80 +0,0 @@
-//
-//  AppDelegate.swift
-//  PHP Monitor
-//
-//  Copyright © 2021 Nico Verbruggen. All rights reserved.
-//
-
-import Cocoa
-import UserNotifications
-
-@NSApplicationMain
-class AppDelegate: NSObject, NSApplicationDelegate, NSUserNotificationCenterDelegate {
-    
-    // MARK: - Variables
-    
-    /**
-     The Shell singleton that keeps track of the history of all
-     (invoked by PHP Monitor) shell commands. It is used to
-     invoke all commands in this application.
-     */
-    let sharedShell : Shell
-    
-    /**
-     The App singleton contains information about the state of
-     the application and global variables.
-     */
-    let state : App
-    
-    /**
-     The MainMenu singleton is responsible for rendering the
-     menu bar item and its menu, as well as its actions.
-     */
-    let menu : MainMenu
-    
-    /**
-     The paths singleton that determines where Homebrew is installed,
-     and where to look for binaries.
-     */
-    let paths : Paths
-    
-    // MARK: - Initializer
-    
-    /**
-     When the application initializes, create all singletons.
-     */
-    override init() {
-        self.sharedShell = Shell.user
-        self.state = App.shared
-        self.menu = MainMenu.shared
-        self.paths = Paths.shared
-        super.init()
-    }
-    
-    // MARK: - Lifecycle
-    
-    /**
-     When the application has finished launching, we'll want to set up
-     the user notification center delegate, and kickoff the menu
-     startup procedure.
-     */
-    func applicationDidFinishLaunching(_ aNotification: Notification) {
-        NSUserNotificationCenter.default.delegate = self
-        self.menu.startup()
-    }
-    
-    // MARK: - NSUserNotificationCenterDelegate
-    
-    /**
-     When a notification is sent, the delegate of the notification center
-     is asked whether the notification should be presented or not. Since
-     the user can now disable notifications per application since macOS
-     Catalina, any and all notifications should be displayed.
-     */
-    func userNotificationCenter(
-        _ center: NSUserNotificationCenter,
-        shouldPresent notification: NSUserNotification
-    ) -> Bool {
-        return true
-    }
-}

phpmon/Assets.xcassets/AppColor.colorset/Contents.json

@@ -0,0 +1,38 @@
+{
+  "colors" : [
+    {
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.988",
+          "green" : "0.580",
+          "red" : "0.278"
+        }
+      },
+      "idiom" : "universal"
+    },
+    {
+      "appearances" : [
+        {
+          "appearance" : "luminosity",
+          "value" : "dark"
+        }
+      ],
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.988",
+          "green" : "0.723",
+          "red" : "0.277"
+        }
+      },
+      "idiom" : "universal"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/AppIconDev.appiconset/Contents.json

@@ -0,0 +1,68 @@
+{
+  "images" : [
+    {
+      "filename" : "icon_16x16.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "16x16"
+    },
+    {
+      "filename" : "icon_16x16@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "16x16"
+    },
+    {
+      "filename" : "icon_32x32.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "32x32"
+    },
+    {
+      "filename" : "icon_32x32@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "32x32"
+    },
+    {
+      "filename" : "icon_128x128.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "128x128"
+    },
+    {
+      "filename" : "icon_128x128@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "128x128"
+    },
+    {
+      "filename" : "icon_256x256.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "256x256"
+    },
+    {
+      "filename" : "icon_256x256@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "256x256"
+    },
+    {
+      "filename" : "icon_512x512.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "512x512"
+    },
+    {
+      "filename" : "icon_512x512@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "512x512"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/AppSecondary.colorset/Contents.json

@@ -0,0 +1,38 @@
+{
+  "colors" : [
+    {
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.250",
+          "green" : "0.250",
+          "red" : "0.250"
+        }
+      },
+      "idiom" : "universal"
+    },
+    {
+      "appearances" : [
+        {
+          "appearance" : "luminosity",
+          "value" : "dark"
+        }
+      ],
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.750",
+          "green" : "0.750",
+          "red" : "0.750"
+        }
+      },
+      "idiom" : "universal"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/Checkmark.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "check.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/Checkmark.imageset/check.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><!-- Font Awesome Pro 5.15.4 by @fontawesome - https://fontawesome.com License - https://fontawesome.com/license (Commercial License) --><path d="M435.848 83.466L172.804 346.51l-96.652-96.652c-4.686-4.686-12.284-4.686-16.971 0l-28.284 28.284c-4.686 4.686-4.686 12.284 0 16.971l133.421 133.421c4.686 4.686 12.284 4.686 16.971 0l299.813-299.813c4.686-4.686 4.686-12.284 0-16.971l-28.284-28.284c-4.686-4.686-12.284-4.686-16.97 0z"/></svg>

phpmon/Assets.xcassets/Contents.json

@@ -1,6 +1,6 @@
 {
   "info" : {
-    "version" : 1,
-    "author" : "xcode"
+    "author" : "xcode",
+    "version" : 1
   }
-}
+}

phpmon/Assets.xcassets/IconColorGreen.colorset/Contents.json

@@ -0,0 +1,38 @@
+{
+  "colors" : [
+    {
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.501",
+          "green" : "0.697",
+          "red" : "0.247"
+        }
+      },
+      "idiom" : "universal"
+    },
+    {
+      "appearances" : [
+        {
+          "appearance" : "luminosity",
+          "value" : "dark"
+        }
+      ],
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.501",
+          "green" : "0.765",
+          "red" : "0.247"
+        }
+      },
+      "idiom" : "universal"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/IconColorNormal.colorset/Contents.json

@@ -0,0 +1,38 @@
+{
+  "colors" : [
+    {
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.000",
+          "green" : "0.000",
+          "red" : "0.000"
+        }
+      },
+      "idiom" : "universal"
+    },
+    {
+      "appearances" : [
+        {
+          "appearance" : "luminosity",
+          "value" : "dark"
+        }
+      ],
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "1.000",
+          "green" : "1.000",
+          "red" : "1.000"
+        }
+      },
+      "idiom" : "universal"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/IconColorRed.colorset/Contents.json

@@ -0,0 +1,38 @@
+{
+  "colors" : [
+    {
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.180",
+          "green" : "0.000",
+          "red" : "1.000"
+        }
+      },
+      "idiom" : "universal"
+    },
+    {
+      "appearances" : [
+        {
+          "appearance" : "luminosity",
+          "value" : "dark"
+        }
+      ],
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.426",
+          "green" : "0.363",
+          "red" : "1.000"
+        }
+      },
+      "idiom" : "universal"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/IconDefault.imageset/Contents.json

@@ -0,0 +1,25 @@
+{
+  "images" : [
+    {
+      "filename" : "Default.png",
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Default@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/IconLinked.imageset/Contents.json

@@ -0,0 +1,25 @@
+{
+  "images" : [
+    {
+      "filename" : "Linked.png",
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Linked@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/IconParked.imageset/Contents.json

@@ -0,0 +1,25 @@
+{
+  "images" : [
+    {
+      "filename" : "Parked.png",
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Parked@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/IconProxy.imageset/Contents.json

@@ -0,0 +1,25 @@
+{
+  "images" : [
+    {
+      "filename" : "Proxy.png",
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Proxy@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/Isolated.imageset/Contents.json

@@ -0,0 +1,25 @@
+{
+  "images" : [
+    {
+      "filename" : "Isolated.png",
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Isolated@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/Lock.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Locked.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/Lock.imageset/Locked.svg

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg width="100%" height="100%" viewBox="0 0 30 30" version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xml:space="preserve" xmlns:serif="http://www.serif.com/" style="fill-rule:evenodd;clip-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2;">
+    <rect id="Locked" x="0" y="0" width="30" height="30" style="fill:none;"/>
+    <g id="Locked1" serif:id="Locked">
+        <g transform="matrix(0.0468317,0,0,0.0468317,4.50971,3.01112)">
+            <path d="M400,256L152,256L152,152.9C152,113.3 183.7,80.4 223.3,80C263.3,79.6 296,112.1 296,152L296,266.079C296,279.379 376,279.137 376,265.837L376,152C376,68 307.5,-0.3 223.5,0C139.5,0.3 72,69.5 72,153.5L72,256L48,256C21.5,256 0,277.5 0,304L0,464C0,490.5 21.5,512 48,512L400,512C426.5,512 448,490.5 448,464L448,304C448,277.5 426.5,256 400,256Z" style="fill-rule:nonzero;"/>
+        </g>
+    </g>
+</svg>

phpmon/Assets.xcassets/LockUnlocked.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Unlocked.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/LockUnlocked.imageset/Unlocked.svg

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg width="100%" height="100%" viewBox="0 0 30 30" version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xml:space="preserve" xmlns:serif="http://www.serif.com/" style="fill-rule:evenodd;clip-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2;">
+    <rect id="Locked" x="0" y="0" width="30" height="30" style="fill:none;"/>
+    <g id="Locked1" serif:id="Locked">
+        <g transform="matrix(0.0468317,0,0,0.0468317,4.50971,3.01112)">
+            <path d="M400,256L152,256L152,152.9C152,113.3 183.7,80.4 223.3,80C263.3,79.6 296,112.1 296,152L296,168C296,181.3 322.386,192 322.386,192L352,192C365.3,192 376,181.3 376,168L376,152C376,68 307.5,-0.3 223.5,0C139.5,0.3 72,69.5 72,153.5L72,256L48,256C21.5,256 0,277.5 0,304L0,464C0,490.5 21.5,512 48,512L400,512C426.5,512 448,490.5 448,464L448,304C448,277.5 426.5,256 400,256Z" style="fill-rule:nonzero;"/>
+        </g>
+    </g>
+</svg>

phpmon/Assets.xcassets/Menu Bar Icons/Contents.json

@@ -0,0 +1,6 @@
+{
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/Menu Bar Icons/MenuBar_elephant.imageset/Contents.json

@@ -0,0 +1,22 @@
+{
+  "images" : [
+    {
+      "filename" : "Menu Bar Elephant.png",
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Menu Bar Elephant@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/Menu Bar Icons/MenuBar_php.imageset/Contents.json

@@ -0,0 +1,22 @@
+{
+  "images" : [
+    {
+      "filename" : "Menu Bar.png",
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Menu Bar@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/StatusBarIconStatic.imageset/Contents.json

@@ -0,0 +1,22 @@
+{
+  "images" : [
+    {
+      "filename" : "phpmon.png",
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "phpmon@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/StatusColorGreen.colorset/Contents.json

@@ -0,0 +1,38 @@
+{
+  "colors" : [
+    {
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.501",
+          "green" : "0.697",
+          "red" : "0.247"
+        }
+      },
+      "idiom" : "universal"
+    },
+    {
+      "appearances" : [
+        {
+          "appearance" : "luminosity",
+          "value" : "dark"
+        }
+      ],
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.501",
+          "green" : "0.765",
+          "red" : "0.247"
+        }
+      },
+      "idiom" : "universal"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/StatusColorRed.colorset/Contents.json

@@ -0,0 +1,38 @@
+{
+  "colors" : [
+    {
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.180",
+          "green" : "0.000",
+          "red" : "1.000"
+        }
+      },
+      "idiom" : "universal"
+    },
+    {
+      "appearances" : [
+        {
+          "appearance" : "luminosity",
+          "value" : "dark"
+        }
+      ],
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.426",
+          "green" : "0.363",
+          "red" : "1.000"
+        }
+      },
+      "idiom" : "universal"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/StatusColorYellow.colorset/Contents.json

@@ -0,0 +1,38 @@
+{
+  "colors" : [
+    {
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.180",
+          "green" : "0.841",
+          "red" : "1.000"
+        }
+      },
+      "idiom" : "universal"
+    },
+    {
+      "appearances" : [
+        {
+          "appearance" : "luminosity",
+          "value" : "dark"
+        }
+      ],
+      "color" : {
+        "color-space" : "srgb",
+        "components" : {
+          "alpha" : "1.000",
+          "blue" : "0.426",
+          "green" : "0.809",
+          "red" : "1.000"
+        }
+      },
+      "idiom" : "universal"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Common/Command/ActiveCommand.swift

@@ -0,0 +1,25 @@
+//
+//  ActiveCommand.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 12/10/2022.
+//  Copyright © 2023 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+var Command: CommandProtocol {
+    return ActiveCommand.shared
+}
+
+class ActiveCommand {
+    static var shared: CommandProtocol = RealCommand()
+
+    public static func useTestable(_ output: [String: String]) {
+        Self.shared = TestableCommand(commands: output)
+    }
+
+    public static func useSystem() {
+        Self.shared = RealCommand()
+    }
+}

phpmon/Common/Command/CommandProtocol.swift

@@ -0,0 +1,22 @@
+//
+//  CommandProtocol.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 12/10/2022.
+//  Copyright © 2023 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+protocol CommandProtocol {
+
+    /**
+     Immediately executes a command.
+
+     - Parameter path: The path of the command or program to invoke.
+     - Parameter arguments: A list of arguments that are passed on.
+     - Parameter trimNewlines: Removes empty new line output.
+     */
+    func execute(path: String, arguments: [String], trimNewlines: Bool) -> String
+
+}

phpmon/Common/Command/RealCommand.swift

@@ -0,0 +1,33 @@
+//
+//  Command.swift
+//  PHP Monitor
+//
+//  Copyright © 2023 Nico Verbruggen. All rights reserved.
+//
+
+import Cocoa
+
+public class RealCommand: CommandProtocol {
+
+    public func execute(path: String, arguments: [String], trimNewlines: Bool = false) -> String {
+        let task = Process()
+        task.launchPath = path
+        task.arguments = arguments
+
+        let pipe = Pipe()
+        task.standardOutput = pipe
+        task.launch()
+
+        let data = pipe.fileHandleForReading.readDataToEndOfFile()
+        let output: String = String.init(data: data, encoding: String.Encoding.utf8)!
+
+        if trimNewlines {
+            return output.components(separatedBy: .newlines)
+                .filter({ !$0.isEmpty })
+                .joined(separator: "\n")
+        }
+
+        return output
+    }
+
+}

phpmon/Common/Core/Actions.swift

@@ -0,0 +1,127 @@
+//
+//  Services.swift
+//  PHP Monitor
+//
+//  Copyright © 2023 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+import AppKit
+
+class Actions {
+
+    // MARK: - Services
+
+    public static func restartPhpFpm() async {
+        await brew("services restart \(Homebrew.Formulae.php)", sudo: Homebrew.Formulae.php.elevated)
+    }
+
+    public static func restartNginx() async {
+        await brew("services restart \(Homebrew.Formulae.nginx)", sudo: Homebrew.Formulae.nginx.elevated)
+    }
+
+    public static func restartDnsMasq() async {
+        await brew("services restart \(Homebrew.Formulae.dnsmasq)", sudo: Homebrew.Formulae.dnsmasq.elevated)
+    }
+
+    public static func stopValetServices() async {
+        await brew("services stop \(Homebrew.Formulae.php)", sudo: Homebrew.Formulae.php.elevated)
+        await brew("services stop \(Homebrew.Formulae.nginx)", sudo: Homebrew.Formulae.nginx.elevated)
+        await brew("services stop \(Homebrew.Formulae.dnsmasq)", sudo: Homebrew.Formulae.dnsmasq.elevated)
+    }
+
+    public static func fixHomebrewPermissions() throws {
+        var servicesCommands = [
+            "\(Paths.brew) services stop \(Homebrew.Formulae.nginx)",
+            "\(Paths.brew) services stop \(Homebrew.Formulae.dnsmasq)"
+        ]
+
+        var cellarCommands = [
+            "chown -R \(Paths.whoami):admin \(Paths.cellarPath)/\(Homebrew.Formulae.nginx)",
+            "chown -R \(Paths.whoami):admin \(Paths.cellarPath)/\(Homebrew.Formulae.dnsmasq)"
+        ]
+
+        PhpEnv.shared.availablePhpVersions.forEach { version in
+            let formula = version == PhpEnv.brewPhpAlias
+                ? "php"
+                : "php@\(version)"
+            servicesCommands.append("\(Paths.brew) services stop \(formula)")
+            cellarCommands.append("chown -R \(Paths.whoami):admin \(Paths.cellarPath)/\(formula)")
+        }
+
+        let script =
+            servicesCommands.joined(separator: " && ")
+            + " && "
+            + cellarCommands.joined(separator: " && ")
+
+        let source = "do shell script \"\(script)\" with administrator privileges"
+
+        Log.perf(source)
+        let appleScript = NSAppleScript(source: source)
+
+        let eventResult: NSAppleEventDescriptor? = appleScript?.executeAndReturnError(nil)
+
+        if eventResult == nil {
+            throw HomebrewPermissionError(kind: .applescriptNilError)
+        }
+    }
+
+    // MARK: - Finding Config Files
+
+    public static func openGenericPhpConfigFolder() {
+        let files = [NSURL(fileURLWithPath: "\(Paths.etcPath)/php")]
+        NSWorkspace.shared.activateFileViewerSelecting(files as [URL])
+    }
+
+    public static func openPhpConfigFolder(version: String) {
+        let files = [NSURL(fileURLWithPath: "\(Paths.etcPath)/php/\(version)/php.ini")]
+        NSWorkspace.shared.activateFileViewerSelecting(files as [URL])
+    }
+
+    public static func openGlobalComposerFolder() {
+        let file = URL(string: "file://~/.composer/composer.json".replacingTildeWithHomeDirectory)!
+        NSWorkspace.shared.activateFileViewerSelecting([file] as [URL])
+    }
+
+    public static func openValetConfigFolder() {
+        let file = URL(string: "file://~/.config/valet".replacingTildeWithHomeDirectory)!
+        NSWorkspace.shared.activateFileViewerSelecting([file] as [URL])
+    }
+
+    public static func openPhpMonitorConfigFile() {
+        let file = URL(string: "file://~/.config/phpmon".replacingTildeWithHomeDirectory)!
+        NSWorkspace.shared.activateFileViewerSelecting([file] as [URL])
+    }
+
+    // MARK: - Other Actions
+
+    public static func createTempPhpInfoFile() async -> URL {
+        try! FileSystem.writeAtomicallyToFile("/tmp/phpmon_phpinfo.php", content: "<?php phpinfo();")
+
+        // Tell php-cgi to run the PHP and output as an .html file
+        await Shell.quiet("\(Paths.binPath)/php-cgi -q /tmp/phpmon_phpinfo.php > /tmp/phpmon_phpinfo.html")
+
+        return URL(string: "file:///private/tmp/phpmon_phpinfo.html")!
+    }
+
+    // MARK: - Fix My Valet
+
+    /**
+     Detects all currently available PHP versions,
+     and unlinks each and every one of them.
+     
+     This all happens in sequence, nothing runs in parallel.
+     
+     After this, the brew services are also stopped,
+     the latest PHP version is linked, and php + nginx are restarted.
+     
+     If this does not solve the issue, the user may need to install additional
+     extensions and/or run `composer global update`.
+     */
+    public static func fixMyValet() async {
+        await InternalSwitcher().performSwitch(to: PhpEnv.brewPhpAlias)
+        await brew("services restart \(Homebrew.Formulae.dnsmasq)", sudo: Homebrew.Formulae.dnsmasq.elevated)
+        await brew("services restart \(Homebrew.Formulae.php)", sudo: Homebrew.Formulae.php.elevated)
+        await brew("services restart \(Homebrew.Formulae.nginx)", sudo: Homebrew.Formulae.nginx.elevated)
+    }
+}

phpmon/Common/Core/Constants.swift

@@ -0,0 +1,87 @@
+//
+//  Constants.swift
+//  PHP Monitor
+//
+//  Copyright © 2023 Nico Verbruggen. All rights reserved.
+//
+
+import Cocoa
+
+struct Constants {
+
+    /**
+     The minimum version of Valet that is recommended.
+     If the installed version is older, a notification will be shown
+     every time the app launches (with a recommendation to upgrade).
+
+     See also: https://github.com/laravel/valet/releases/tag/v2.16.2
+     */
+    static let MinimumRecommendedValetVersion = "2.16.2"
+
+    /**
+     * The PHP versions supported by this application.
+     * Any other PHP versions are considered invalid.
+     */
+    static let DetectedPhpVersions: Set = [
+        "5.6",
+        "7.0", "7.1", "7.2", "7.3", "7.4",
+        "8.0", "8.1", "8.2", "8.3"
+    ]
+
+    /**
+     The PHP versions supported by each version of Valet.
+     */
+    static let ValetSupportedPhpVersionMatrix: [Int: Set] = [
+        2: // Valet v2 has the broadest legacy support
+        [
+            "5.6",
+            "7.0", "7.1", "7.2", "7.3", "7.4",
+            "8.0", "8.1", "8.2"
+        ],
+        3: // Valet v3 dropped support for v5.6
+        [
+            "7.0", "7.1", "7.2", "7.3", "7.4",
+            "8.0", "8.1", "8.2",
+            "8.3" // dev
+        ],
+        4: // Valet v4 dropped support for v7.0
+        [
+            "7.1", "7.2", "7.3", "7.4",
+            "8.0", "8.1", "8.2",
+            "8.3" // dev
+        ]
+    ]
+
+    struct Urls {
+
+        // phpmon.app URLs (these are aliased to redirect correctly)
+
+        static let DonationPage = URL(
+            string: "https://phpmon.app/sponsor"
+        )!
+
+        static let FrequentlyAskedQuestions = URL(
+            string: "https://phpmon.app/faq"
+        )!
+
+        static let DonationPayment = URL(
+            string: "https://phpmon.app/sponsor/now"
+        )!
+
+        // GitHub URLs (do not alias these)
+
+        static let GitHubReleases = URL(
+            string: "https://github.com/nicoverbruggen/phpmon/releases"
+        )!
+
+        static let StableBuildCaskFile = URL(
+            string: "https://raw.githubusercontent.com/nicoverbruggen/homebrew-cask/master/Casks/phpmon.rb"
+        )!
+
+        static let DevBuildCaskFile = URL(
+            string: "https://raw.githubusercontent.com/nicoverbruggen/homebrew-cask/master/Casks/phpmon-dev.rb"
+        )!
+
+    }
+
+}

phpmon/Common/Core/Events.swift

@@ -0,0 +1,15 @@
+//
+//  Events.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 23/01/2022.
+//  Copyright © 2023 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+class Events {
+
+    static let ServicesUpdated = Notification.Name("ServicesUpdated")
+
+}

phpmon/Common/Core/Helpers.swift

@@ -0,0 +1,59 @@
+//
+//  Helpers.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 24/12/2021.
+//  Copyright © 2023 Nico Verbruggen. All rights reserved.
+//
+
+// MARK: Common Shell Commands
+
+/**
+ Runs a `valet` command. Defaults to running as superuser.
+ */
+func valet(_ command: String, sudo: Bool = true) async -> String {
+    return await Shell.pipe("\(sudo ? "sudo " : "")" + "\(Paths.valet) \(command)").out
+}
+
+/**
+ Runs a `brew` command. Can run as superuser.
+ */
+func brew(_ command: String, sudo: Bool = false) async {
+    await Shell.quiet("\(sudo ? "sudo " : "")" + "\(Paths.brew) \(command)")
+}
+
+/**
+ Runs `sed` in order to replace all occurrences of a string in a specific file with another.
+ */
+func sed(file: String, original: String, replacement: String) async {
+    // Escape slashes (or `sed` won't work)
+    let e_original = original.replacingOccurrences(of: "/", with: "\\/")
+    let e_replacement = replacement.replacingOccurrences(of: "/", with: "\\/")
+
+    // Check if gsed exists; it is able to follow symlinks,
+    // which we want to do to toggle the extension
+    if FileSystem.fileExists("\(Paths.binPath)/gsed") {
+        await Shell.quiet("\(Paths.binPath)/gsed -i --follow-symlinks 's/\(e_original)/\(e_replacement)/g' \(file)")
+    } else {
+        await Shell.quiet("sed -i '' 's/\(e_original)/\(e_replacement)/g' \(file)")
+    }
+}
+
+/**
+ Uses `grep` to determine whether a particular query string can be found in a particular file.
+ */
+func grepContains(file: String, query: String) async -> Bool {
+    return await Shell.pipe("""
+            grep -q '\(query)' \(file); [ $? -eq 0 ] && echo "YES" || echo "NO"
+            """).out
+        .trimmingCharacters(in: .whitespacesAndNewlines)
+        .contains("YES")
+}
+
+/**
+ Attempts to introduce sleep for a particular duration. Use with caution.
+ Only intended for testing purposes.
+ */
+func delay(seconds: Double) async {
+    try! await Task.sleep(nanoseconds: UInt64(seconds * 1_000_000_000))
+}