👌 Save window size and position for site list

- Site name already exists?
- Site name empty?

.github/FUNDING.yml

@@ -0,0 +1 @@
+custom: ['https://nicoverbruggen.be/sponsor', 'https://paypal.me/nicoverbruggen']

.github/pull_request_template.md

@@ -0,0 +1,35 @@
+Hello there! Thank you for considering a pull request for PHP Monitor. 
+
+Please read the text below first before you submit your PR.
+
+## Do not PR unless...
+
+In order to make development and maintenance of PHP Monitor easier, I ask that you _avoid_ making a pull request in the following situations:
+
+* No issue has been associated with the changes you‘d like to merge
+* You have not announced you will be addressing a particular issue
+* The PR is a low effort change: e.g. commits that only fix typos or phrasing may not be accepted
+
+(If you believe the phrasing of particular text in the app is unclear or incorrect, please open an issue first.)
+
+In short: It is usually best to *get in touch first* if you are making substantial changes.
+
+## About destination branches
+
+Please keep in mind that `main` is reserved for the current code state of the latest release and should *never* be the destination branch unless a new release is happening. **Merge requests that target `main` will be closed without mercy.**
+
+Usually, the best target is the stable `dev/x.x` branch that corresponds with the latest major version that is released. 
+
+There may be a newer branch available, which is an appropriate place for bigger changes, but please keep in mind that it is usually best to announce you‘ll be working on such a change before you spend the time, since as the lead contributor I might not even want said change in the app. Thank you.
+
+## Your changes
+
+(feel free to remove the disclaimer above)
+
+* Affected parts of the app: shared code / UI code / CLI (remove what does not apply)
+* Estimated impact on performance: none / low / high (remove what does not apply)
+* Made a new build with Xcode and tested this: yes / no (remove what does not apply)
+* Tested on macOS version + architecture: (e.g. "Monterey on M1" or "Big Sur on Intel")
+* References issue(s): (please reference the issue here, using # and the number of the issue)
+
+(please describe what you have changed here)

.gitignore

@@ -2,3 +2,4 @@ phpmon.xcodeproj/project.xcworkspace
 phpmon.xcodeproj/xcuserdata
 PHP Monitor.xcodeproj/project.xcworkspace
 PHP Monitor.xcodeproj/xcuserdata
+.DS_Store

PHP Monitor.xcodeproj/xcshareddata/xcschemes/PHP Monitor CLI.xcscheme

@@ -0,0 +1,84 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Scheme
+   LastUpgradeVersion = "1320"
+   version = "1.3">
+   <BuildAction
+      parallelizeBuildables = "YES"
+      buildImplicitDependencies = "YES">
+      <BuildActionEntries>
+         <BuildActionEntry
+            buildForTesting = "YES"
+            buildForRunning = "YES"
+            buildForProfiling = "YES"
+            buildForArchiving = "YES"
+            buildForAnalyzing = "YES">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C415D3D52770F341005EF286"
+               BuildableName = "phpmon-cli"
+               BlueprintName = "phpmon-cli"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </BuildActionEntry>
+      </BuildActionEntries>
+   </BuildAction>
+   <TestAction
+      buildConfiguration = "Debug"
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      shouldUseLaunchSchemeArgsEnv = "YES">
+      <Testables>
+      </Testables>
+   </TestAction>
+   <LaunchAction
+      buildConfiguration = "Debug"
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      launchStyle = "0"
+      useCustomWorkingDirectory = "NO"
+      ignoresPersistentStateOnLaunch = "NO"
+      debugDocumentVersioning = "YES"
+      debugServiceExtension = "internal"
+      allowLocationSimulation = "YES">
+      <BuildableProductRunnable
+         runnableDebuggingMode = "0">
+         <BuildableReference
+            BuildableIdentifier = "primary"
+            BlueprintIdentifier = "C415D3D52770F341005EF286"
+            BuildableName = "phpmon-cli"
+            BlueprintName = "phpmon-cli"
+            ReferencedContainer = "container:PHP Monitor.xcodeproj">
+         </BuildableReference>
+      </BuildableProductRunnable>
+      <CommandLineArguments>
+         <CommandLineArgument
+            argument = "help"
+            isEnabled = "YES">
+         </CommandLineArgument>
+      </CommandLineArguments>
+   </LaunchAction>
+   <ProfileAction
+      buildConfiguration = "Release"
+      shouldUseLaunchSchemeArgsEnv = "YES"
+      savedToolIdentifier = ""
+      useCustomWorkingDirectory = "NO"
+      debugDocumentVersioning = "YES">
+      <BuildableProductRunnable
+         runnableDebuggingMode = "0">
+         <BuildableReference
+            BuildableIdentifier = "primary"
+            BlueprintIdentifier = "C415D3D52770F341005EF286"
+            BuildableName = "phpmon-cli"
+            BlueprintName = "phpmon-cli"
+            ReferencedContainer = "container:PHP Monitor.xcodeproj">
+         </BuildableReference>
+      </BuildableProductRunnable>
+   </ProfileAction>
+   <AnalyzeAction
+      buildConfiguration = "Debug">
+   </AnalyzeAction>
+   <ArchiveAction
+      buildConfiguration = "Release"
+      revealArchiveInOrganizer = "YES">
+   </ArchiveAction>
+</Scheme>

PHP Monitor.xcodeproj/xcshareddata/xcschemes/PHP Monitor.xcscheme

@@ -0,0 +1,89 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Scheme
+   LastUpgradeVersion = "1320"
+   version = "1.3">
+   <BuildAction
+      parallelizeBuildables = "YES"
+      buildImplicitDependencies = "YES">
+      <BuildActionEntries>
+         <BuildActionEntry
+            buildForTesting = "YES"
+            buildForRunning = "YES"
+            buildForProfiling = "YES"
+            buildForArchiving = "YES"
+            buildForAnalyzing = "YES">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C41C1B3222B0097F00E7CF16"
+               BuildableName = "PHP Monitor.app"
+               BlueprintName = "PHP Monitor"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </BuildActionEntry>
+      </BuildActionEntries>
+   </BuildAction>
+   <TestAction
+      buildConfiguration = "Debug"
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      shouldUseLaunchSchemeArgsEnv = "YES">
+      <Testables>
+         <TestableReference
+            skipped = "NO">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "C4F7807825D7F84B000DBC97"
+               BuildableName = "phpmon-tests.xctest"
+               BlueprintName = "phpmon-tests"
+               ReferencedContainer = "container:PHP Monitor.xcodeproj">
+            </BuildableReference>
+         </TestableReference>
+      </Testables>
+   </TestAction>
+   <LaunchAction
+      buildConfiguration = "Debug"
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      launchStyle = "0"
+      useCustomWorkingDirectory = "NO"
+      ignoresPersistentStateOnLaunch = "NO"
+      debugDocumentVersioning = "YES"
+      debugServiceExtension = "internal"
+      enableGPUValidationMode = "1"
+      allowLocationSimulation = "YES">
+      <BuildableProductRunnable
+         runnableDebuggingMode = "0">
+         <BuildableReference
+            BuildableIdentifier = "primary"
+            BlueprintIdentifier = "C41C1B3222B0097F00E7CF16"
+            BuildableName = "PHP Monitor.app"
+            BlueprintName = "PHP Monitor"
+            ReferencedContainer = "container:PHP Monitor.xcodeproj">
+         </BuildableReference>
+      </BuildableProductRunnable>
+   </LaunchAction>
+   <ProfileAction
+      buildConfiguration = "Release"
+      shouldUseLaunchSchemeArgsEnv = "YES"
+      savedToolIdentifier = ""
+      useCustomWorkingDirectory = "NO"
+      debugDocumentVersioning = "YES">
+      <BuildableProductRunnable
+         runnableDebuggingMode = "0">
+         <BuildableReference
+            BuildableIdentifier = "primary"
+            BlueprintIdentifier = "C41C1B3222B0097F00E7CF16"
+            BuildableName = "PHP Monitor.app"
+            BlueprintName = "PHP Monitor"
+            ReferencedContainer = "container:PHP Monitor.xcodeproj">
+         </BuildableReference>
+      </BuildableProductRunnable>
+   </ProfileAction>
+   <AnalyzeAction
+      buildConfiguration = "Debug">
+   </AnalyzeAction>
+   <ArchiveAction
+      buildConfiguration = "Release"
+      revealArchiveInOrganizer = "YES">
+   </ArchiveAction>
+</Scheme>

README.md

@@ -1,48 +1,348 @@
 # PHP Monitor
 
-PHP Monitor (or phpmon) is a macOS utility that runs on your Mac and displays the active PHP version in your status bar. 
+> If this software has been useful to you, I ask that you **please star the repository**, that way I know that the software is being used. Also, please consider leaving [a one-time donation](https://nicoverbruggen.be/sponsor) to support the project.
+> You can also send me [feedback](https://twitter.com/nicoverbruggen) if the app came in handy.<br>**Thank you!** ⭐️
 
-<img src="./docs/screenshot.png" width="278px" alt="phpmon screenshot"/>
+<img src="./phpmon/Assets.xcassets/AppIcon.appiconset/icon_128x128@2x.png" alt="phpmon icon" width="128px" />
 
-For me, it comes in handy when running multiple versions of PHP with Homebrew and you wish to be able to see at a glance which version is currently linked & active with Laravel Valet, and switch between versions.
+**PHP Monitor** (or phpmon) is a lightweight macOS utility app that runs on your Mac and displays the active PHP version in your status bar. It's tightly integrated with [Laravel Valet](https://github.com/laravel/valet), so you need to have it set up before you can use this.
 
-This version of PHP Monitor was developed for:
+<img src="./docs/screenshot41.jpg" width="800px" alt="phpmon screenshot (menu bar app)"/>
 
-* macOS Mojave (10.14)
-* PHP 7.x with Homebrew 2.x (with support for PHP 5.6 and PHP 7.0 [as well](https://github.com/eXolnet/homebrew-deprecated))
-* Laravel Valet 2.2
+<small><i>Screenshot: A menu showing all of the functionality of PHP Monitor.</i></small>
 
-## Why I built this
+It's super convenient to switch between different versions of PHP. You'll even get notifications (only if you choose to opt-in, of course)!
 
-I wanted to be able to see at a glance which version of PHP was linked, and handle dealing with Laravel Valet in a simple app without having to deal with the terminal every time. 
+<img src="./docs/notification.png" width="370px" alt="phpmon screenshot (notification)"/>
 
-Initially, I had an Alfred workflow for this. But this does the job as well, while also showing me at all times which version of PHP is linked (which is the main benefit over e.g. an Alfred workflow).
+PHP Monitor also gives you quick access to various useful functionality (like accessing configuration files, restarting services, and more).
 
-## How it works
+## 🖥 System requirements
 
-### Version detection
+PHP Monitor is a universal application that runs on Apple Silicon **and** Intel-based Macs.
 
-This utility runs `php -r 'print phpversion();'` in the background periodically (every 60 seconds) and extracts the version number.
+* macOS 11 Big Sur or higher (supports macOS 12 Monterey)
+* Homebrew is installed in `/usr/local/homebrew` or `/opt/homebrew`
+* The brew formula `php` has to be installed (which version is detected)
+* Laravel Valet 2.16.2 or higher (older versions might be compatible but are not supported)
+
+_You may need to update your Valet installation to keep everything working if a major version update of PHP has been released. You can do this by running `composer global update && valet install`._
+
+## 🚀 How to install
+
+You can install via Homebrew (recommended), or may download the latest release on GitHub.
+
+To install via Homebrew, run:
+
+	brew tap nicoverbruggen/homebrew-cask
+	brew install --cask phpmon
+
+To upgrade your existing installation, run:
+
+	brew upgrade phpmon
+
+_The app is signed and notarized, meaning all you have to do is approve its first launch._
+
+## 👨‍💻 Why build this?
+
+I wanted to be able to **see at a glance** which version of PHP was linked, and handle dealing with Laravel Valet in a simple app without having to deal with the terminal every time. 
+
+Initially, I had an Alfred workflow for this — but it has now been replaced with this utility, which also does a good job at displaying additional information at a glance, like the current PHP version, memory limits, and more.
+
+## 🤬 The app won't start?!
+
+PHP Monitor performs some integrity checks to ensure a good experience when using the app. You'll get a message telling you that PHP Monitor won't work correctly in a variety of scenarios. 
+
+**Follow instructions as specified in the alert in order to resolve any issues.**
+
+## 🙋‍♂️ FAQ & Troubleshooting
+
+> If you are having issues, the first thing you should be doing is installing the latest version of PHP Monitor _and_ Laravel Valet. This can resolve a variety of issues. To upgrade Valet, run `composer global update`. Don't forget to run `valet install` after upgrading.
+
+If you're still having issues, here's a few common questions & answers, as well as issues and solutions:
+
+<details>
+<summary><strong>Which versions of PHP are supported?</strong></summary>
+
+<ul>
+<li>PHP 5.6</li>
+<li>PHP 7.0</li>
+<li>PHP 7.1</li>
+<li>PHP 7.2</li>
+<li>PHP 7.3</li>
+<li>PHP 7.4</li>
+<li>PHP 8.0</li>
+<li>PHP 8.1</li>
+<li>PHP 8.2 (experimental)</li>
+</ul>
+
+For more details, consult the [constants file](https://github.com/nicoverbruggen/phpmon/blob/main/phpmon/Constants.swift#L16) file to see which versions are supported.
+
+</details>
+
+<details>
+<summary><strong>I want PHP Monitor to start up when I boot my Mac!</strong></summary>
+
+You can do this by dragging *PHP Monitor.app* into the **Login Items** section in **System Preferences > Users & Groups** for your account.
+
+Super convenient!
+</details>
+
+<details>
+<summary><strong>I want to set up PHP Monitor from scratch! I don't have Homebrew installed either, where do I begin?</strong></summary>
+
+If you want to set up your computer for the very first time with PHP Monitor, here's how I do it:
+
+Install [Homebrew](https://brew.sh) first.
+
+Install PHP, composer, add to path:
+
+    brew install php
+    brew install composer
+    nano .zshrc
+
+Make sure the following line is not in the comments:
+
+    # on an Intel Mac
+    export PATH=$HOME/bin:/usr/local/bin:$PATH
+
+If you're on an Apple Silicon-based Mac, you'll need to add: 
+
+    # on an M1 Mac
+    export PATH=$HOME/bin:/opt/homebrew/bin:$PATH
+
+and add the following to your .zshrc, but add this BEFORE the homebrew PATH additions:
+
+    export PATH=$HOME/bin:~/.composer/vendor/bin:$PATH
+    
+If you're adding composer and Homebrew binaries, ensure that Homebrew binaries are preferred by adding these to the path last. On my system, that looks like this:
+
+    export PATH=$HOME/bin:/usr/local/bin:$PATH
+    export PATH=$HOME/bin:~/.composer/vendor/bin:$PATH
+    export PATH=$HOME/bin:/opt/homebrew/bin:$PATH
+
+Make sure PHP is linked correctly:
+
+    which php
+
+should return: `/usr/local/bin/php` (or `/opt/homebrew/bin/php`)
+
+    composer global require laravel/valet
+    valet install
+
+This should install `dnsmasq` and set up Valet. Great, almost there!
+
+    valet trust
+
+Finally, run PHP Monitor. Since the app is notarized and signed with a developer ID, it should work.
+</details>
+
+<details>
+<summary><strong>PHP Monitor tells me `php` is not installed...</strong></summary>
+
+Try installing again using `brew install php`. 
+
+This should resolve the issue! If that does not fix the issue, run `brew link php --force`. (Afterwards, you may need to restart your terminal to make sure the new linked version is detected.)
+
+	brew install php
+	brew link php --force
+	
+</details>
+
+<details>
+<summary><strong>Valet sites won't load. I'm getting a 502 Bad Gateway error!</strong></summary>
+
+If you're visiting your `.test` domain, and you're getting a 502 (Bad Gateway) after switching to a different PHP version, you're dealing with a common issue.
+
+This problem is usually resolved by upgrading Valet and running `valet install` again.
+
+	composer global update
+	valet install
+
+</details>
+
+<details>
+<summary><strong>PHP Monitor tells me my installation is broken, but I don't see why!</strong></summary>
+
+PHP Monitor tells you that a PHP installation is broken, if the configuration is causing warnings or errors when determining the version number.
+
+Since PHP Monitor changes the linked version via Homebrew, both Valet *and* your terminal (CLI) should use the new PHP version.
+
+However, this might not be the case on your system. You _might_ have a specific version of PHP linked if that is not the case. In that case, you may need to change your `.bashrc` or `.zshrc` file where the PATH is set (depending on the terminal you use).
+
+You can find out which version of PHP is being used by running `which php`.
+
+You can find out what exactly is causing the issue by running a command. On Intel, you can run (replace `7.4` with the version that is broken):
+
+```
+/usr/local/opt/php@7.4/bin/php -r "print phpversion();"
+```
+
+On Apple Silicon, you can run (replace `7.4` with the version that is broken):
+
+```
+/opt/homebrew/opt/php@7.4/bin/php -r "print phpversion();"
+```
+
+You should see an error or a warning here in the output. 
+
+Usually this is a duplicate extension declaration causing issues, or an extension that couldn't be loaded. You'll have to solve that issue yourself (usually by removing the offending extension or reinstalling).
+
+</details>
+	
+<details>
+<summary><strong>One of the limits (memory limit, max POST size, max upload size) shows an exclamation mark!</strong></summary>
+
+The value you provided in your INI file is invalid. If that is the case, PHP will attempt to parse your value as bytes, which is usually unintended. (`1GB` will resolve to merely a few bytes, and all of your applications will run out of memory!)
+
+You must a provide a value like so: `1024K`, `256M`, `1G`. Alternatively, `-1` is also allowed, or just an integer (which will result in N amount of bytes being the limit).
+
+**Example**: Trying to use `1GB` as the memory limit, for example, will result in this exclamation mark. The correct way to set a 1GB limit is by using `1G` as the value. (Note: The displayed value will append `B` for clarity, so if you set `1G`, the value reported by PHP Monitor will be 1 GB.)
+
+</details>
+
+<details>
+<summary><strong>One of my commented out extensions is not being detected...</strong></summary>
+
+The app searches in the relevant `.ini` files for a specific pattern. For regular extensions:
+
+* `extension="*.so"`
+* `; extension="*.so"`
+
+For Zend extensions:
+
+* `zend_extension="*.so"`
+* `; zend_extension="*.so"`
+
+The `*` is a wildcard and the name of the extension. If you've commented out the extension, make sure you've commented it out with a semicolon (;) and a single space after the semicolon for PHP Monitor to detect it.
+
+Since v3.4 all of the loaded .ini files are sourced to determine which extensions are enabled.
+
+</details>
+
+<details>
+<summary><strong>I've got two Homebrew installations on my Apple Silicon Mac, can I choose which installation to use with PHP Monitor?</strong></summary>
+
+Not at this time, no. PHP Monitor will prefer the `/opt/homebrew` installation over the classic installation directory.
+
+</details>
+
+<details>
+<summary><strong>Why is the app doing network requests?</strong></summary>
+
+It's Homebrew. I can't prevent `brew` from doing things via the network when I invoke it.
+
+PHP Monitor itself doesn't do any network requests. Feel free to check the source code or intercept the traffic, if you don't believe me.
+
+</details>
+
+<details>
+<summary><strong>How do I get various applications to show up in the domain list's right-click menu?</strong></summary>
+
+When you select and right-click on a domain, you can open these directories with various applications. This can help speed up your workflow. However, for these apps to show up, they must be detected first.
+
+The supported apps are: <i>PhpStorm, Visual Studio Code, Sublime Text, Sublime Merge, iTerm</i>.
+
+All of these apps should just be detected correctly, no matter their location on your system. If you can open it using `open -a "appname"`, the app should be detected and work. If you have renamed the app, there might be an issue getting it detected.
+
+To see which files are checked to determine availability, see [this file](./phpmon/Domain/Helpers/Application.swift).
+
+You can add your own apps by creating and editing a `~/.phpmon.conf.json` file, with the following entry:
+
+<pre>
+{
+    "scan_apps": ["Xcode", "Kraken"]
+}
+</pre>
+
+You can put as many apps as you'd like in the `scan_apps` array, and PHP Monitor will check for the existence of these apps. You do not need to set the full path, just the name of the app should work. Not all apps support opening a folder, though, so your success might vary.
+</details>
+
+<details>
+<summary><strong>After running PHP Monitor, Homebrew sometimes has issues with `brew upgrade` or `brew cleanup`!</strong></summary>
+
+<strike>This is a security feature of Homebrew. When you start a service as an administrator, the root user becomes the owner of relevant binaries. You will need to manually clean up those folders yourself using `rm -rf` (or by manually removing those folders via Finder).</strike>
+
+**Update**: If you are using the Valet switcher (currently not available in the latest stable build) you will not encounter this issue. For more information on this, see [this issue](https://github.com/nicoverbruggen/phpmon/issues/17) and also [this issue about switching to Valet's switcher](https://github.com/nicoverbruggen/phpmon/issues/34).
+
+</details>
+
+<details>
+<summary><strong>The app has crashed!</strong></summary>
+
+Please get in touch and open an issue. PHP Monitor shouldn't crash... (unless you are actually removing PHP *while* the app is running, that’s considered normal behaviour!)
+
+</details>
+
+## 📝 Having another issue?
+
+I did not include any tracking or analytics software, so if you encounter issues, let me know [via an issue](https://github.com/nicoverbruggen/phpmon/issues/new).
+
+## 💵 Support me?
+
+PHP Monitor is available entirely **free of charge**, but if you can afford it a donation helps keep the project alive and the app maintained.
+
+You can find a [sponsor](https://nicoverbruggen.be/sponsor) link at the top of this repo or you could click the link here to be taken to my sponsorship page.
+
+Donations really help with the Apple Developer Program cost, and keep me motivated to keep working on PHP Monitor outside of work hours (I do have a day job!).
+
+## 😎 Acknowledgements
+
+While I did make this application during my own free time, I have been lucky enough to do various experiments during work hours at [DIVE](https://dive.be). I'd also like to shout out the following folks:
+
+* My colleagues at [DIVE](https://dive.be)
+* The [Homebrew](https://brew.sh/) team who maintain
+* The [developers & maintainers of Valet](https://github.com/laravel/valet/graphs/contributors)
+* Everyone in the Laravel community who shared the app (thanks!)
+* Various folks who [reached](https://twitter.com/stauffermatt) [out](https://twitter.com/marcelpociot)
+* Everyone who left feedback via issues
+* Everyone who donated to keep the project up and running
+
+Thank you very much for your contributions, kind words and support.
+
+## 🚜 How it works
+
+### Loading info about PHP in the background
+
+This utility runs `php-config --version` in the background periodically. It also checks your `.ini` files for extensions and loads more information about your limits (memory limit, POST limit, upload limit). 
+
+In order to save power, this only happens once every 60 seconds.
 
 ### Switching PHP versions
 
 This utility will detect which PHP versions you have installed via Homebrew, and then allows you to switch between them.
 
-This means:
+The switcher will disable all PHP-FPM services not belonging to the version you wish to use, and link the desired version of PHP. Then, it'll restart your desired PHP version's FPM process. This all happens in parallel, so this should be much faster than Valet’s switcher.
 
-- You have at least the latest version of PHP installed (`php@7.3`)
-- You have installed Laravel Valet (`which valet` returns `/usr/local/bin/valet`)
-- You ran `valet trust`, which means Valet commands can be run without using sudo
+### Config change detection
 
-The utility runs the following commands:
+PHP Monitor watches your filesystem in the relevant `conf.d` directory for the currently linked PHP version. 
 
-- Unlink all detected PHP versions
-- Switch to PHP 7.3 (this is done in order to ensure that Valet works, even when attempting to use PHP 5.6)
-- Tell Valet to switch to a specific PHP version
-- Link the desired version of PHP
+Whenever an .ini file is modified, PHP Monitor will attempt to reload the current information about the active PHP installation. 
+
+If an extension or other process writes to a single file a bunch of times in a short span of time (&lt; 1 sec), PHP Monitor will only reload the active configuration information after a while (with a slight delay).
+
+### Site detection
+
+1. **Location of your sites**: PHP Monitor uses the Valet configuration file to determine which folders to look into. Each folder is scanned and then PHP Monitor will validate if a composer.json file exists to determine the desired PHP version.
+1. **Sites secured or not secured**: Whether the directory has been secured is determined by checking if a matching certificate exists under Valet's `Certificates` directory for that site name.
+1. **Site drivers**: PHP Monitor runs `valet which` to determine which driver is currently in use for each individual site. This command is executed once for each site whenever the site list is refreshed.
+
+*Note*: If you have linked a folder in Documents, Desktop or Downloads you might need to grant PHP Monitor access to those directories for PHP Monitor to work correctly.
 
 ### Want to know more?
 
-If you want to know more about how this works, I recommend you check out the source code. 
+If you want to know more about how this works, I recommend you check out the source code.
 
-This app isn't very complicated after all. In the end, this just (conveniently) executes some shell commands.
+## 🔧 Build instructions
+
+<img src="./docs/build.png" width="404px" alt="build button in Xcode"/>
+
+If you'd like to build PHP Monitor yourself, you need:
+
+* Xcode (usually the latest version)
+* The contents of this repository
+
+Once you have downloaded this repository, open `PHP Monitor.xcodeproj`, and you should be able to immediately build the app for your system by pressing Cmd-R. This will create a debug build. (If Xcode complains about code signing, you can turn it off.)
+
+If you'd like to create a production build, choose "Any Mac" as the target and select Product > Archive.

RELEASE.md

@@ -0,0 +1,13 @@
+# Release Procedure
+
+1. Merge into `main`
+2. Create tag
+3. Add changes to changelog + update security document
+4. Archive
+5. Notarize and prepare for own distribution
+6. After notarization, export .app
+7. Create zipped version
+8. Calculate SHA256: `openssl dgst -sha256 phpmon.zip`
+9. Upload to GitHub and add to tagged release
+10. Update Cask with new version + hash
+11. Check new version can be installed via Cask

SECURITY.md

@@ -0,0 +1,28 @@
+# Security Policy
+
+## Supported versions
+
+Generally speaking, only the latest version of **PHP Monitor** is supported, except during transition periods (for example, when particular system requirements go up):
+
+| Version | Apple silicon | Supported          | Supported macOS | Deployment Target | Detected PHP Versions | Minimum Required Valet Version |
+| ------- | ------------- | ------------------ | ----- | ----- | ----- | ----
+| 5.x       | ✅ Universal binary | ✅ Yes | Big Sur (11.0) and Monterey (12.0) | macOS 11+ | PHP 5.6—PHP 8.2 | TBD |
+
+## Legacy versions
+
+These versions of PHP Monitor are no longer supported, but if you’re using an older computer with an older version of Homebrew, Valet or macOS, you might want to use one of these versions.
+
+| Version | Apple silicon | Supported          | Supported macOS | Deployment Target | Detected PHP Versions | Minimum Required Valet Version |
+| ------- | ------------- | ------------------ | ----- | ----- | ----- | ----
+| 4.1       | ✅ Universal binary | ❌ | Big Sur (11.0) and Monterey (12.0) | macOS 11+ | PHP 5.6—PHP 8.2 | 2.16.2 |
+| 4.0       | ✅ Universal binary | ❌ | Big Sur (11.0) and Monterey (12.0) | macOS 10.14+ | PHP 5.6—PHP 8.2 | 2.13 |
+| 3.5       | ✅ Universal binary | ❌ | Big Sur (11.0) and Monterey (12.0) | macOS 10.14+ | PHP 5.6—PHP 8.2 | 2.13 |
+| 3.0—3.4   | ✅ Universal binary | ❌ | Big Sur (11.0) | macOS 10.14+ | PHP 5.6—PHP 8.1 | 2.13 |
+| 2.6       | ✅ Universal binary | ❌ | Big Sur (11.0) | macOS 10.14+ | PHP 5.6—PHP 8.0 | 2.13 |
+| 2.5       | ✴️ Universal binary<br/>`/usr/local/homebrew` installations only | ❌ | Big Sur (11.0)<br/>Catalina (10.15) | macOS 10.14+ | not applicable | not applicable |
+| 2.4       | ✴️ Universal binary<br/>`/usr/local/homebrew` installations only | ❌ | Big Sur (11.0)<br/>Catalina (10.15) | macOS 10.14+ | not applicable | not applicable |
+| < 2.4     | ❌ Intel binary<br/>`/usr/local/homebrew` installations only | ❌ | Catalina (10.15) | macOS 10.14+ | not applicable | not applicable | 
+
+## Reporting a vulnerability
+
+Contact me (Nico Verbruggen) at the email address used for the commits in the repository. Please include "PHP Monitor" in the subject.

assets/icon.svg

@@ -0,0 +1 @@
+<svg width="512" height="512" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"><defs><filter x="-4.6%" y="-3.4%" width="109.2%" height="109.2%" filterUnits="objectBoundingBox" id="b"><feOffset dy="5" in="SourceAlpha" result="shadowOffsetOuter1"/><feGaussianBlur stdDeviation="5.5" in="shadowOffsetOuter1" result="shadowBlurOuter1"/><feColorMatrix values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.26 0" in="shadowBlurOuter1"/></filter><filter x="-8.6%" y="-11%" width="117.1%" height="121.9%" filterUnits="objectBoundingBox" id="d"><feOffset dx="1" dy="2" in="SourceAlpha" result="shadowOffsetOuter1"/><feGaussianBlur stdDeviation="6.5" in="shadowOffsetOuter1" result="shadowBlurOuter1"/><feColorMatrix values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.372049825 0" in="shadowBlurOuter1" result="shadowMatrixOuter1"/><feMerge><feMergeNode in="shadowMatrixOuter1"/><feMergeNode in="SourceGraphic"/></feMerge></filter><linearGradient x1="50.023%" y1="-15.482%" x2="50.023%" y2="104.493%" id="e"><stop stop-color="#51C2FB" offset=".053%"/><stop stop-color="#1C91FE" offset="100%"/></linearGradient><path d="M167.939 50H344.06c41.01 0 55.881 4.27 70.874 12.288 14.992 8.018 26.759 19.785 34.777 34.777C457.73 112.058 462 126.93 462 167.94V344.06c0 41.01-4.27 55.881-12.288 70.874-8.018 14.992-19.785 26.759-34.777 34.777C399.942 457.73 385.07 462 344.06 462H167.94c-41.01 0-55.881-4.27-70.874-12.288-14.992-8.018-26.759-19.785-34.777-34.777C54.27 399.942 50 385.07 50 344.06V167.94c0-41.01 4.27-55.881 12.288-70.874 8.018-14.992 19.785-26.759 34.777-34.777C112.058 54.27 126.93 50 167.94 50z" id="a"/></defs><g fill="none" fill-rule="evenodd"><mask id="c" fill="#fff"><use xlink:href="#a"/></mask><use filter="url(#b)" xlink:href="#a" fill-rule="nonzero" fill="#000"/><g mask="url(#c)"><path fill="#FFF" d="M50 50h412v412H50z"/></g><g filter="url(#d)" mask="url(#c)"><path fill="#FFF" d="M131.535 155.144l63.377-8.907 33.68 239.645-63.377 8.907zM315.79 263.497l63.377-8.907 15.17 107.94-63.377 8.906z"/><path fill="#FFF" d="M315.79 263.497l63.377-8.907 15.17 107.94-63.377 8.906z"/><path fill="#FFF" d="M316.01 173.224l84.001 68.319-53.919 66.92-84-68.318z"/><path fill="#FFF" d="M93.155 157.813l164.384-23.102 21.433 152.5-164.385 23.104z"/><path d="M133.3 83.75h-12.9V54.437c0-2.303-1.935-4.187-4.3-4.187h-8.6c-2.365 0-4.3 1.884-4.3 4.188v41.874c0 2.304 1.935 4.188 4.3 4.188h25.8c2.365 0 4.3-1.884 4.3-4.188v-8.374c0-2.304-1.935-4.188-4.3-4.188zm202.1 100.5h-8.6v-56.584c0-6.647-2.741-13.033-7.579-17.744L265.525 57.63c-4.837-4.71-11.395-7.38-18.221-7.38H223.6V25.125C223.6 11.254 212.044 0 197.8 0h-172C11.556 0 0 11.254 0 25.125v167.5c0 13.871 11.556 25.125 25.8 25.125h8.6C34.4 245.492 57.513 268 86 268c28.487 0 51.6-22.508 51.6-50.25h68.8c0 27.742 23.112 50.25 51.6 50.25 28.488 0 51.6-22.508 51.6-50.25h25.8c4.73 0 8.6-3.769 8.6-8.375v-16.75c0-4.606-3.87-8.375-8.6-8.375zM86 242.875c-14.244 0-25.8-11.254-25.8-25.125s11.556-25.125 25.8-25.125c14.244 0 25.8 11.254 25.8 25.125s-11.556 25.125-25.8 25.125zm25.8-92.125c-33.271 0-60.2-26.224-60.2-58.625 0-32.4 26.929-58.625 60.2-58.625S172 59.724 172 92.125c0 32.4-26.929 58.625-60.2 58.625zM258 242.875c-14.244 0-25.8-11.254-25.8-25.125s11.556-25.125 25.8-25.125c14.244 0 25.8 11.254 25.8 25.125s-11.556 25.125-25.8 25.125zM301 134h-77.4V75.375h23.704L301 127.666V134z" fill="url(#e)" fill-rule="nonzero" transform="rotate(-8 1129.292 -453.38)"/></g></g></svg>

assets/menubar.svg

@@ -0,0 +1 @@
+<svg width="22" height="22" xmlns="http://www.w3.org/2000/svg"><path d="M8.975 8.375H8.3V6.844a.223.223 0 00-.225-.219h-.45a.223.223 0 00-.225.219V9.03c0 .12.101.219.225.219h1.35a.223.223 0 00.225-.219v-.437a.223.223 0 00-.225-.219zm10.575 5.25h-.45v-2.956c0-.347-.143-.68-.397-.927l-2.81-2.731a1.37 1.37 0 00-.953-.386H13.7V5.312C13.7 4.588 13.095 4 12.35 4h-9C2.605 4 2 4.588 2 5.313v8.75c0 .724.605 1.312 1.35 1.312h.45C3.8 16.825 5.01 18 6.5 18c1.49 0 2.7-1.176 2.7-2.625h3.6c0 1.45 1.21 2.625 2.7 2.625 1.49 0 2.7-1.176 2.7-2.625h1.35c.247 0 .45-.197.45-.438v-.874a.445.445 0 00-.45-.438zM6.5 16.688c-.745 0-1.35-.588-1.35-1.313s.605-1.313 1.35-1.313c.745 0 1.35.588 1.35 1.313s-.605 1.313-1.35 1.313zm1.35-4.813c-1.74 0-3.15-1.37-3.15-3.063C4.7 7.12 6.11 5.75 7.85 5.75S11 7.12 11 8.813c0 1.692-1.41 3.062-3.15 3.062zm7.65 4.813c-.745 0-1.35-.588-1.35-1.313s.605-1.313 1.35-1.313c.745 0 1.35.588 1.35 1.313s-.605 1.313-1.35 1.313zM17.75 11H13.7V7.937h1.24l2.81 2.732V11z" fill="#000" fill-rule="nonzero"/></svg>

phpmon-cli/AllowedArguments.swift

@@ -0,0 +1,26 @@
+//
+//  AllowedArguments.swift
+//  phpmon-cli
+//
+//  Created by Nico Verbruggen on 20/12/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+enum AllowedArguments: String, CaseIterable {
+    case use = "use"
+    case performSwitch = "switch"
+    case fix = "fix"
+    case help = "help"
+    
+    static func has(_ string: String) -> Bool {
+        return Self.allCases.contains { arg in
+            return arg.rawValue == string
+        }
+    }
+    
+    static var rawValues: [String] {
+        return Self.allCases.map { $0.rawValue }
+    }
+}

phpmon-cli/main.swift

@@ -0,0 +1,103 @@
+//
+//  main.swift
+//  phpmon-cli
+//
+//  Created by Nico Verbruggen on 20/12/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+let toolver = "0.1 (early access)"
+
+let log = Log.shared
+log.verbosity = .info
+
+if CommandLine.arguments.contains("-q") || CommandLine.arguments.contains("--quiet") {
+    Log.shared.verbosity = .warning
+}
+if CommandLine.arguments.contains("-p") || CommandLine.arguments.contains("--performance") {
+    Log.shared.verbosity = .performance
+}
+
+var argument = "help"
+if CommandLine.arguments.count > 1 {
+    argument = CommandLine.arguments[1]
+}
+
+if !AllowedArguments.has(argument) {
+    Log.err("The supported arguments are: \(AllowedArguments.rawValues)")
+    exit(1)
+}
+
+let action = AllowedArguments.init(rawValue: argument)
+
+switch action {
+case .use, .performSwitch:
+    if !Shell.fileExists("\(Paths.binPath)/php") {
+        Log.err("PHP is currently not linked. Attempting quick fix...")
+        _ = Shell.user.executeSynchronously("brew link php", requiresPath: true)
+    }
+    
+    let phpenv = PhpEnv.shared
+    PhpEnv.detectPhpVersions()
+    
+    if CommandLine.arguments.count < 3 {
+        Log.err("You must enter at least two additional arguments when using this command.")
+        exit(1)
+    }
+    
+    let version = CommandLine.arguments[2].replacingOccurrences(of: "php@", with: "")
+    if phpenv.availablePhpVersions.contains(version) {
+        Log.info("Switching to PHP \(version)...")
+        Actions.switchToPhpVersion(
+            version: version,
+            availableVersions: phpenv.availablePhpVersions,
+            completed: {
+                Log.info("The switch has been completed.")
+                exit(0)
+            }
+        )
+    } else {
+        Log.err("A PHP installation with version \(version) is not installed.")
+        Log.err("The installed versions are: \(phpenv.availablePhpVersions.joined(separator: ", ")).")
+        Log.err("If this version is available, you may be able to install it by using `brew install php@\(version)`.")
+        exit(1)
+    }
+case .fix:
+    Log.info("Fixing your PHP installation...")
+    Actions.fixMyPhp()
+    Log.info("All operations completed. You can check which version of PHP is linked by using `php -v`.")
+    exit(0)
+case .help:
+    print("""
+    ===============================================================
+    PHP MONITOR CLI \(toolver)
+    by Nico Verbruggen
+    ===============================================================
+    
+    Gives access to the quick version switcher from PHP Monitor,
+    but without the GUI and 100% of the speed!
+    
+    SUPPORTED COMMANDS
+    
+    * use {version}:      Switch to a specific version of PHP.
+                          (e.g. `phpmon-cli use 8.0`)
+    * switch {version}:   Alias for the `use` command.
+    * fix                 Attempts to unlink all PHP versions,
+                          and link the latest version of PHP.
+    * help:               Show this help.
+    
+    SUPPORTED FLAGS
+    
+    * `-q / --quiet`:     Silences all logs except for warnings and exceptions.
+    * `-p / --perf`:      Enables performance mode.
+    
+    """)
+    exit(0)
+case .none:
+    Log.err("Action not recognized!")
+    exit(1)
+}
+
+RunLoop.main.run()

phpmon-common/Core/Actions.swift

@@ -0,0 +1,121 @@
+//
+//  Services.swift
+//  PHP Monitor
+//
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+import AppKit
+
+class Actions {
+    
+    // MARK: - Services
+    
+    public static func restartPhpFpm()
+    {
+        brew("services restart \(PhpEnv.phpInstall.formula)", sudo: true)
+    }
+    
+    public static func restartNginx()
+    {
+        brew("services restart nginx", sudo: true)
+    }
+    
+    public static func restartDnsMasq()
+    {
+        brew("services restart dnsmasq", sudo: true)
+    }
+    
+    public static func stopAllServices()
+    {
+        brew("services stop \(PhpEnv.phpInstall.formula)", sudo: true)
+        brew("services stop nginx", sudo: true)
+        brew("services stop dnsmasq", sudo: true)
+    }
+    
+    /**
+     Kindly asks Valet to switch to a specific PHP version.
+     */
+    public static func switchToPhpVersionUsingValet(
+        version: String,
+        availableVersions: [String],
+        completed: @escaping () -> Void
+    ) {
+        Log.info("Switching to \(version) using Valet")
+        Log.info(valet("use php@\(version)"))
+        completed()
+    }
+    
+    // MARK: - Finding Config Files
+    
+    public static func openGenericPhpConfigFolder()
+    {
+        let files = [NSURL(fileURLWithPath: "\(Paths.etcPath)/php")];
+        NSWorkspace.shared.activateFileViewerSelecting(files as [URL])
+    }
+    
+    public static func openGlobalComposerFolder()
+    {
+        let file = FileManager.default.homeDirectoryForCurrentUser
+            .appendingPathComponent(".composer/composer.json")
+        NSWorkspace.shared.activateFileViewerSelecting([file] as [URL])
+    }
+    
+    public static func openPhpConfigFolder(version: String)
+    {
+        let files = [NSURL(fileURLWithPath: "\(Paths.etcPath)/php/\(version)/php.ini")];
+        NSWorkspace.shared.activateFileViewerSelecting(files as [URL])
+    }
+    
+    public static func openValetConfigFolder()
+    {
+        let file = FileManager.default.homeDirectoryForCurrentUser
+            .appendingPathComponent(".config/valet")
+        NSWorkspace.shared.activateFileViewerSelecting([file] as [URL])
+    }
+
+    // MARK: - Other Actions
+    
+    public static func createTempPhpInfoFile() -> URL
+    {
+        // Write a file called `phpmon_phpinfo.php` to /tmp
+        try! "<?php phpinfo();".write(toFile: "/tmp/phpmon_phpinfo.php", atomically: true, encoding: .utf8)
+        
+        // Tell php-cgi to run the PHP and output as an .html file
+        Shell.run("\(Paths.binPath)/php-cgi -q /tmp/phpmon_phpinfo.php > /tmp/phpmon_phpinfo.html")
+        
+        return URL(string: "file:///private/tmp/phpmon_phpinfo.html")!
+    }
+    
+    // MARK: - Quick Fix
+    
+    /**
+     Detects all currently available PHP versions,
+     and unlinks each and every one of them.
+     
+     After this, the brew services are also stopped,
+     the latest PHP version is linked, and php + nginx are restarted.
+     
+     If this does not solve the issue, the user may need to install additional
+     extensions and/or run `composer global update`.
+     */
+    public static func fixMyPhp()
+    {
+        brew("services restart dnsmasq", sudo: true)
+        
+        PhpEnv.shared.detectPhpVersions().forEach { (version) in
+            let formula = (version == PhpEnv.brewPhpVersion) ? "php" : "php@\(version)"
+            brew("unlink php@\(version)")
+            brew("services stop \(formula)")
+            brew("services stop \(formula)", sudo: true)
+        }
+        
+        brew("services stop php")
+        brew("services stop nginx")
+        brew("link php")
+        brew("services restart dnsmasq", sudo: true)
+        brew("services stop php", sudo: true)
+        brew("services stop nginx", sudo: true)
+    }
+}

phpmon-common/Core/Command.swift

@@ -0,0 +1,40 @@
+//
+//  Command.swift
+//  PHP Monitor
+//
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Cocoa
+
+public class Command {
+    
+    /**
+     Immediately executes a command.
+     
+     - Parameter path: The path of the command or program to invoke.
+     - Parameter arguments: A list of arguments that are passed on.
+     - Parameter trimNewlines: Removes empty new line output.
+     */
+    public static func execute(path: String, arguments: [String], trimNewlines: Bool = false) -> String {
+        let task = Process()
+        task.launchPath = path
+        task.arguments = arguments
+        
+        let pipe = Pipe()
+        task.standardOutput = pipe
+        task.launch()
+        
+        let data = pipe.fileHandleForReading.readDataToEndOfFile()
+        let output: String = String.init(data: data, encoding: String.Encoding.utf8)!
+        
+        if (trimNewlines) {
+            return output.components(separatedBy: .newlines)
+                .filter({ !$0.isEmpty })
+                .joined(separator: "\n")
+        }
+        
+        return output
+    }
+    
+}

phpmon-common/Core/Constants.swift

@@ -0,0 +1,54 @@
+//
+//  Constants.swift
+//  PHP Monitor
+//
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Cocoa
+
+class Constants {
+    
+    /**
+     * The latest PHP version that is considered to be stable at the time of release.
+     * This version number is currently not used (only as a default fallback).
+     */
+    static let LatestStablePhpVersion = "8.1"
+    
+    /**
+     The minimum version of Valet that is recommended.
+     If the installed version is older, a notification will be shown
+     every time the app launches (with a recommendation to upgrade).
+     
+     The minimum requirement is currently synced to PHP 8.1 compatibility.
+     See also: https://github.com/laravel/valet/releases/tag/v2.16.2
+     */
+    static let MinimumRecommendedValetVersion = "2.16.2"
+    
+    /**
+     * The PHP versions supported by this application.
+     * Versions that do not appear in this array are omitted from the list.
+     */
+    static let SupportedPhpVersions = [
+        // ====================
+        // STABLE RELEASES
+        // ====================
+        // Versions of PHP that are stable and are supported.
+        "5.6",
+        "7.0",
+        "7.1",
+        "7.2",
+        "7.3",
+        "7.4",
+        "8.0",
+        "8.1",
+        
+        // ====================
+        // EXPERIMENTAL SUPPORT
+        // ====================
+        // Every release that supports the next release will always support the next
+        // dev release. In this case, that means that the version below is detected.
+        "8.2"
+    ]
+
+}

phpmon-common/Core/Events.swift

@@ -0,0 +1,15 @@
+//
+//  Events.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 23/01/2022.
+//  Copyright © 2022 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+class Events {
+    
+    static let ServicesUpdated = Notification.Name("ServicesUpdated")
+    
+}

phpmon-common/Core/Helpers.swift

@@ -0,0 +1,55 @@
+//
+//  Helpers.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 24/12/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+// MARK: Common Shell Commands
+
+/**
+ Runs a `valet` command.
+ */
+func valet(_ command: String) -> String
+{
+    return Shell.pipe("sudo \(Paths.valet) \(command)", requiresPath: true)
+}
+
+/**
+ Runs a `brew` command. Can run as superuser.
+ */
+func brew(_ command: String, sudo: Bool = false)
+{
+    Shell.run("\(sudo ? "sudo " : "")" + "\(Paths.brew) \(command)")
+}
+
+/**
+ Runs `sed` in order to replace all occurrences of a string in a specific file with another.
+ */
+func sed(file: String, original: String, replacement: String)
+{
+    // Escape slashes (or `sed` won't work)
+    let e_original = original.replacingOccurrences(of: "/", with: "\\/")
+    let e_replacement = replacement.replacingOccurrences(of: "/", with: "\\/")
+    
+    // Check if gsed exists; it is able to follow symlinks,
+    // which we want to do to toggle the extension
+    if Shell.fileExists("\(Paths.binPath)/gsed") {
+        Shell.run("\(Paths.binPath)/gsed -i --follow-symlinks 's/\(e_original)/\(e_replacement)/g' \(file)")
+    } else {
+        Shell.run("sed -i '' 's/\(e_original)/\(e_replacement)/g' \(file)")
+    }
+}
+
+/**
+ Uses `grep` to determine whether a particular query string can be found in a particular file.
+ */
+func grepContains(file: String, query: String) -> Bool
+{
+    return Shell.pipe("""
+            grep -q '\(query)' \(file); [ $? -eq 0 ] && echo "YES" || echo "NO"
+            """)
+        .trimmingCharacters(in: .whitespacesAndNewlines)
+        .contains("YES")
+}

phpmon-common/Core/Logger.swift

@@ -0,0 +1,52 @@
+//
+//  Logger.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 21/12/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+class Log {
+    
+    static var shared = Log()
+    
+    enum Verbosity: Int {
+        case error = 1,
+             warning = 2,
+             info = 3,
+             performance = 4
+        
+        public func isApplicable() -> Bool {
+            return Log.shared.verbosity.rawValue >= self.rawValue
+        }
+    }
+    
+    var verbosity: Verbosity = .warning
+    
+    static func err(_ item: Any) {
+        if Verbosity.error.isApplicable() {
+            print(item)
+        }
+    }
+    
+    static func warn(_ item: Any) {
+        if Verbosity.warning.isApplicable() {
+            print(item)
+        }
+    }
+    
+    static func info(_ item: Any) {
+        if Verbosity.info.isApplicable() {
+            print(item)
+        }
+    }
+    
+    static func perf(_ item: Any) {
+        if Verbosity.performance.isApplicable() {
+            print(item)
+        }
+    }
+    
+}

phpmon-common/Core/Paths.swift

@@ -0,0 +1,67 @@
+//
+//  Paths.swift
+//  PHP Monitor
+//
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+/**
+ The `Paths` class is used to locate various binaries on the system,
+ and provides a full
+ */
+public class Paths {
+    
+    public static let shared = Paths()
+    
+    private var baseDir : Paths.HomebrewDir
+    
+    init() {
+        baseDir = Shell.fileExists("\(HomebrewDir.opt.rawValue)/bin/brew") ? .opt : .usr
+    }
+    
+    // - MARK: Binaries
+    
+    public static var valet: String {
+        return "\(binPath)/valet"
+    }
+    
+    public static var brew: String {
+        return "\(binPath)/brew"
+    }
+    
+    public static var php: String {
+        return "\(binPath)/php"
+    }
+    
+    public static var phpConfig: String {
+        return "\(binPath)/php-config"
+    }
+    
+    // - MARK: Paths
+    
+    public static var whoami: String {
+        return String(Shell.pipe("whoami").split(separator: "\n")[0])
+    }
+    
+    public static var binPath: String {
+        return "\(shared.baseDir.rawValue)/bin"
+    }
+    
+    public static var optPath: String {
+        return "\(shared.baseDir.rawValue)/opt"
+    }
+    
+    public static var etcPath: String {
+        return "\(shared.baseDir.rawValue)/etc"
+    }
+    
+    // MARK: - Enum
+    
+    public enum HomebrewDir: String {
+        case opt = "/opt/homebrew"
+        case usr = "/usr/local"
+    }
+    
+}

phpmon-common/Core/Shell.swift

@@ -0,0 +1,180 @@
+//
+//  Shell.swift
+//  PHP Monitor
+//
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Cocoa
+
+public class Shell {
+    
+    // MARK: - Invoke static functions
+    
+    public static func run(
+        _ command: String,
+        requiresPath: Bool = false
+    ) {
+        Shell.user.run(command, requiresPath: requiresPath)
+    }
+    
+    public static func pipe(
+        _ command: String,
+        requiresPath: Bool = false
+    ) -> String {
+        return Shell.user.pipe(command, requiresPath: requiresPath)
+    }
+    
+    // MARK: - Singleton
+    
+    /**
+     We now require macOS 11, so no need to detect which terminal to use.
+     */
+    public var shell: String = "/bin/sh"
+    
+    /**
+     Singleton to access a user shell (with --login)
+     */
+    public static let user = Shell()
+    
+    /**
+     Runs a shell command without using the output.
+     Uses the default shell.
+     
+     - Parameter command: The command to run
+     - Parameter requiresPath: By default, the PATH is not resolved but some binaries might require this
+     */
+    private func run(
+        _ command: String,
+        requiresPath: Bool = false
+    ) {
+        // Equivalent of piping to /dev/null; don't do anything with the string
+        _ = Shell.pipe(command, requiresPath: requiresPath)
+    }
+    
+    /**
+     Runs a shell command and returns the output.
+     
+     - Parameter command: The command to run
+     - Parameter requiresPath: By default, the PATH is not resolved but some binaries might require this
+     */
+    private func pipe(
+        _ command: String,
+        requiresPath: Bool = false
+    ) -> String {
+        let shellOutput = self.executeSynchronously(command, requiresPath: requiresPath)
+        let hasError = (
+            shellOutput.standardOutput == ""
+            && shellOutput.errorOutput.lengthOfBytes(using: .utf8) > 0
+        )
+        return !hasError ? shellOutput.standardOutput : shellOutput.errorOutput
+    }
+    
+    /**
+     Runs the command and returns a `ShellOutput` object, which contains info about the process.
+     
+     - Parameter command: The command to run
+     - Parameter requiresPath: By default, the PATH is not resolved but some binaries might require this
+     - Parameter waitUntilExit: Waits for the command to complete before returning the `ShellOutput`
+     */
+    public func executeSynchronously(
+        _ command: String,
+        requiresPath: Bool = false
+    ) -> Shell.Output {
+        
+        let outputPipe = Pipe()
+        let errorPipe = Pipe()
+        
+        let task = self.createTask(for: command, requiresPath: requiresPath)
+        task.standardOutput = outputPipe
+        task.standardError = errorPipe
+        task.launch()
+        task.waitUntilExit()
+    
+        return Shell.Output(
+            standardOutput: String(
+                data: outputPipe.fileHandleForReading.readDataToEndOfFile(),
+                encoding: .utf8
+            )!,
+            errorOutput: String(
+                data: errorPipe.fileHandleForReading.readDataToEndOfFile(),
+                encoding: .utf8
+            )!,
+            task: task
+        )
+    }
+    
+    /**
+     Checks if a file exists at the provided path.
+     Uses `/bin/echo` instead of the `builtin` (which does not support `-n`).
+     */
+    public static func fileExists(_ path: String) -> Bool {
+        let escapedPath = path.replacingOccurrences(of: " ", with: "\\ ")
+        return Shell.pipe("if [ -f \(escapedPath) ]; then /bin/echo -n \"0\"; fi") == "0"
+    }
+    
+    /**
+     Creates a new process with the correct PATH and shell.
+     */
+    public func createTask(for command: String, requiresPath: Bool) -> Process {
+        let tailoredCommand = requiresPath
+        ? "export PATH=\(Paths.binPath):$PATH && \(command)"
+        : command
+        
+        let task = Process()
+        task.launchPath = self.shell
+        task.arguments = ["--login", "-c", tailoredCommand]
+        
+        return task
+    }
+    
+    public static func captureOutput(
+        _ task: Process,
+        didReceiveStdOutData: @escaping (String) -> Void,
+        didReceiveStdErrData: @escaping (String) -> Void
+    ) {
+        let outputPipe = Pipe()
+        let errorPipe = Pipe()
+        
+        task.standardOutput = outputPipe
+        task.standardError = errorPipe
+        
+        [(outputPipe, didReceiveStdOutData), (errorPipe, didReceiveStdErrData)].forEach {
+            (pipe: Pipe, callback: @escaping (String) -> Void) in
+            pipe.fileHandleForReading.waitForDataInBackgroundAndNotify()
+            NotificationCenter.default.addObserver(
+                forName: NSNotification.Name.NSFileHandleDataAvailable,
+                object: pipe.fileHandleForReading,
+                queue: nil
+            ) { notification in
+                if let outputString = String(data: pipe.fileHandleForReading.availableData, encoding: String.Encoding.utf8) {
+                    callback(outputString)
+                }
+                pipe.fileHandleForReading.waitForDataInBackgroundAndNotify()
+            }
+        }
+    }
+    
+    public static func haltCapturingOutput(_ task: Process) {
+        if let pipe = task.standardOutput as? Pipe {
+            NotificationCenter.default.removeObserver(pipe.fileHandleForReading)
+        }
+        if let pipe = task.standardError as? Pipe {
+            NotificationCenter.default.removeObserver(pipe.fileHandleForReading)
+        }
+    }
+    
+    public class Output {
+        public let standardOutput: String
+        public let errorOutput: String
+        public let task: Process
+        
+        init(standardOutput: String,
+             errorOutput: String,
+             task: Process) {
+            self.standardOutput = standardOutput
+            self.errorOutput = errorOutput
+            self.task = task
+        }
+    }
+}

phpmon-common/PHP/ActivePhpInstallation.swift

@@ -0,0 +1,167 @@
+//
+//  ActivePhpInstallation.swift
+//  PHP Monitor
+//
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+/**
+ An installed version of PHP, that was detected by scanning the `/opt/php@version/bin` directory.
+ 
+ When initialized, that version's .ini files are also scanned (for active or inactive extensions).
+ Integrity checks can be performed to determine whether PHP-FPM is configured correctly.
+ 
+ - Note: Each installation has a separate version number.
+ Using `version.short` is advisable if you want to interact with Homebrew.
+ */
+class ActivePhpInstallation {
+
+    var version: Version!
+    var limits: Limits!
+    var extensions: [PhpExtension]!
+    
+    // MARK: - Computed
+    
+    var formula: String {
+        return (version.short == PhpEnv.brewPhpVersion) ? "php" : "php@\(version.short)"
+    }
+    
+    // MARK: - Initializer
+
+    init() {
+        // Show information about the current version
+        getVersion()
+        
+        // If an error occurred, exit early
+        if (version.error) {
+            limits = Limits()
+            extensions = []
+            return
+        }
+        
+        // Load extension information
+        let path = URL(fileURLWithPath: "\(Paths.etcPath)/php/\(version.short)/php.ini")
+        extensions = PhpExtension.load(from: path)
+        
+        // Get configuration values
+        limits = Limits(
+            memory_limit: getByteCount(key: "memory_limit"),
+            upload_max_filesize: getByteCount(key: "upload_max_filesize"),
+            post_max_size: getByteCount(key: "post_max_size")
+        )
+        
+        // Return a list of .ini files parsed after php.ini
+        let paths = Command.execute(path: Paths.php, arguments: ["-r", "echo php_ini_scanned_files();"])
+            .replacingOccurrences(of: "\n", with: "")
+            .split(separator: ",")
+            .map { String($0) }
+        
+        // See if any extensions are present in said .ini files
+        paths.forEach { (iniFilePath) in
+            let exts = PhpExtension.load(from: URL(fileURLWithPath: iniFilePath))
+            if exts.count > 0 {
+                extensions.append(contentsOf: exts)
+            }
+        }
+    }
+    
+    /**
+     When the app tries to retrieve the version, the installation is considered broken if the output is nothing,
+     _or_ if the output contains the word "Warning" or "Error". In normal situations this should not be the case.
+     */
+    private func getVersion() -> Void {
+        self.version = Version()
+        
+        let version = Command.execute(path: Paths.phpConfig, arguments: ["--version"], trimNewlines: true)
+        
+        if (version == "" || version.contains("Warning") || version.contains("Error")) {
+            self.version.short = "💩 BROKEN"
+            self.version.long = ""
+            self.version.error = true
+            return
+        }
+        
+        // That's the long version
+        self.version.long = version
+        
+        // Next up, let's strip away the minor version number
+        let segments = self.version.long.components(separatedBy: ".")
+        
+        // Get the first two elements
+        self.version.short = segments[0...1].joined(separator: ".")
+    }
+    
+    /**
+     Retrieves the display value for a specific key in the `.ini` file.
+     
+     The following values are valid:
+     * -1: unlimited (show the infinity icon)
+     * 10000: an integer = amount of bytes
+     * 1K, 1M, 1G = shorthand for kilobytes, megabytes and gigabytes
+     
+     If none of these notations are used, the _fallback_ value is used.
+     We'll show an emoji to indicate something has gone wrong here.
+     To clarify, B gets appended to valid values.
+     As a result, "5M" (valid) becomes "5MB", and "5MB" (invalid) becomes ⚠️.
+     
+     - Parameter key: The key of the `ini` value that needs to be retrieved. For example, you can use `memory_limit`.
+     */
+    private func getByteCount(key: String) -> String {
+        let value = Command.execute(path: Paths.php, arguments: ["-r", "echo ini_get('\(key)');"])
+        
+        // Check if the value is unlimited
+        if (value == "-1") {
+            return "∞"
+        }
+        
+        // Check if the syntax is valid otherwise
+        let regex = try! NSRegularExpression(pattern: #"^([0-9]*)(K|M|G|)$"#, options: [])
+        let match = regex.matches(in: value, options: [], range: NSMakeRange(0, value.count)).first
+        return (match == nil) ? "⚠️" : "\(value)B"
+    }
+    
+    /**
+     Determine if PHP-FPM is configured correctly.
+     
+     For PHP 5.6, we'll check if `valet.sock` is included in the main `php-fpm.conf` file, but for more recent
+     versions of PHP, we can just check for the existence of the `valet-fpm.conf` file. If the check here fails,
+     that means that Valet won't work properly.
+     */
+    func checkPhpFpmStatus() -> Bool {
+        if self.version.short == "5.6" {
+            // The main PHP config file should contain `valet.sock` and then we're probably fine?
+            let fileName = "\(Paths.etcPath)/php/5.6/php-fpm.conf"
+            return Shell.pipe("cat \(fileName)").contains("valet.sock")
+        }
+        
+        // Make sure to check if valet-fpm.conf exists. If it does, we should be fine :)
+        return Shell.fileExists("\(Paths.etcPath)/php/\(self.version.short)/php-fpm.d/valet-fpm.conf")
+    }
+    
+    // MARK: - Structs
+
+    /**
+     Struct containing information about the version number of the current PHP installation.
+     Also includes information about whether the install is considered "broken" or not.
+     If an error was found in the terminal output, `error` is set to `true` and the installation
+     can be considered broken. (The app will display this as well.)
+     */
+    struct Version {
+        var short = "???"
+        var long = "???"
+        var error = false
+    }
+    
+    /**
+     Struct containing information about the limits of the current PHP installation.
+     Includes: memory limit, max upload size and max post size.
+     */
+    struct Limits {
+        var memory_limit = "???"
+        var upload_max_filesize = "???"
+        var post_max_size = "???"
+    }
+    
+}

phpmon-common/PHP/Homebrew/HomebrewPackage.swift

@@ -0,0 +1,30 @@
+//
+//  HomebrewPackage.swift
+//  PHP Monitor
+//
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+struct HomebrewPackage: Decodable {
+    
+    let name: String
+    let full_name: String
+    let aliases: [String]
+    let installed: [HomebrewInstalled]
+    let linked_keg: String?
+    
+    public var version: String {
+        return aliases.first!
+            .replacingOccurrences(of: "php@", with: "")
+    }
+    
+}
+
+struct HomebrewInstalled: Decodable {
+    let version: String
+    let built_as_bottle: Bool
+    let installed_as_dependency: Bool
+    let installed_on_request: Bool
+}

phpmon-common/PHP/Homebrew/HomebrewService.swift

@@ -0,0 +1,21 @@
+//
+//  HomebrewService.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 11/01/2022.
+//  Copyright © 2022 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+struct HomebrewService: Decodable, Equatable {
+    let name: String
+    let service_name: String
+    let running: Bool
+    let loaded: Bool
+    let pid: Int?
+    let user: String?
+    let status: String?
+    let log_path: String?
+    let error_log_path: String?
+}

phpmon-common/PHP/PHP Version/PhpEnv.swift

@@ -0,0 +1,158 @@
+//
+//  PhpSwitcher.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 21/12/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+protocol PhpSwitcherDelegate: AnyObject {
+    func switcherDidStartSwitching()
+    func switcherDidCompleteSwitch()
+}
+
+class PhpEnv {
+    
+    // MARK: - Initializer
+    
+    init() {
+        self.currentInstall = ActivePhpInstallation()
+        
+        let brewPhpAlias = Shell.pipe("\(Paths.brew) info php --json");
+        
+        self.homebrewPackage = try! JSONDecoder().decode(
+            [HomebrewPackage].self,
+            from: brewPhpAlias.data(using: .utf8)!
+        ).first!
+        
+        Log.info("When on your system, the `php` formula means version \(homebrewPackage.version)!")
+    }
+    
+    // MARK: - Properties
+    
+    /** The delegate that is informed of updates. */
+    weak var delegate: PhpSwitcherDelegate?
+
+    /** The static app instance. Accessible at any time. */
+    static let shared = PhpEnv()
+    
+    /** Whether the switcher is busy performing any actions. */
+    var isBusy: Bool = false
+    
+    /** All available versions of PHP. */
+    var availablePhpVersions: [String] = []
+    
+    /** Cached information about the PHP installations. */
+    var cachedPhpInstallations: [String: PhpInstallation] = [:]
+    
+    /** Information about the currently linked PHP installation. */
+    var currentInstall: ActivePhpInstallation
+    
+    /**
+     The version that the `php` formula via Brew is aliased to on the current system.
+     
+     If you're up to date, `php` will be aliased to the latest version,
+     but that might not be the case since not everyone keeps their
+     software up-to-date.
+     
+     As such, we take that information from Homebrew.
+     */
+    static var brewPhpVersion: String {
+        return Self.shared.homebrewPackage.version
+    }
+    
+    /**
+     The currently linked and active PHP installation.
+     */
+    static var phpInstall: ActivePhpInstallation {
+        return Self.shared.currentInstall
+    }
+    
+    /**
+     Information we were able to discern from the Homebrew info command.
+     */
+    var homebrewPackage: HomebrewPackage! = nil
+    
+    // MARK: - Methods
+    
+    public static var switcher: PhpSwitcher {
+        return InternalSwitcher()
+    }
+    
+    public static func detectPhpVersions() -> Void {
+        _ = Self.shared.detectPhpVersions()
+    }
+    
+    /**
+     Detects which versions of PHP are installed.
+     */
+    public func detectPhpVersions() -> [String]
+    {
+        let files = Shell.pipe("ls \(Paths.optPath) | grep php@")
+        
+        var versionsOnly = extractPhpVersions(from: files.components(separatedBy: "\n"))
+        
+        // Make sure the aliased version is detected
+        // The user may have `php` installed, but not e.g. `php@8.0`
+        // We should also detect that as a version that is installed
+        let phpAlias = homebrewPackage.version
+        
+        // Avoid inserting a duplicate
+        if (!versionsOnly.contains(phpAlias) && Shell.fileExists("\(Paths.optPath)/php/bin/php")) {
+            versionsOnly.append(phpAlias)
+        }
+        
+        Log.info("The PHP versions that were detected are: \(versionsOnly)")
+        
+        availablePhpVersions = versionsOnly
+        
+        var mappedVersions: [String: PhpInstallation] = [:]
+        
+        availablePhpVersions.forEach { version in
+            mappedVersions[version] = PhpInstallation(version)
+        }
+        
+        cachedPhpInstallations = mappedVersions
+        
+        return versionsOnly
+    }
+    
+    /**
+     Extracts valid PHP versions from an array of strings.
+     This array of strings is usually retrieved from `grep`.
+     */
+    public func extractPhpVersions(
+        from versions: [String],
+        checkBinaries: Bool = true
+    ) -> [String] {
+        var output : [String] = []
+        
+        versions.filter { (version) -> Bool in
+            // Omit everything that doesn't start with php@
+            // (e.g. something-php@8.0 won't be detected)
+            return version.starts(with: "php@")
+        }.forEach { (string) in
+            let version = string.components(separatedBy: "php@")[1]
+            // Only append the version if it doesn't already exist (avoid dupes),
+            // is supported and where the binary exists (avoids broken installs)
+            if !output.contains(version)
+                && Constants.SupportedPhpVersions.contains(version)
+                && (checkBinaries ? Shell.fileExists("\(Paths.optPath)/php@\(version)/bin/php") : true)
+            {
+                output.append(version)
+            }
+        }
+        
+        return output
+    }
+    
+    public func validVersions(for constraint: String) -> [PhpVersionNumber] {
+        constraint.split(separator: "|").flatMap {
+            return PhpVersionNumberCollection
+                .make(from: self.availablePhpVersions)
+                .matching(constraint: $0.trimmingCharacters(in: .whitespacesAndNewlines))
+        }
+    }
+}

phpmon-common/PHP/PHP Version/PhpVersionNumber.swift

@@ -0,0 +1,141 @@
+//
+//  PhpVersionNumber.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 23/01/2022.
+//  Copyright © 2022 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+public struct PhpVersionNumberCollection: Equatable {
+    let versions: [PhpVersionNumber]
+    
+    public static func make(from versions: [String]) -> Self {
+        return PhpVersionNumberCollection(
+            versions: versions.map { PhpVersionNumber.make(from: $0)! }
+        )
+    }
+    
+    public var first: PhpVersionNumber? {
+        return self.versions.first
+    }
+    
+    public var all: [PhpVersionNumber] {
+        return self.versions
+    }
+    
+    /**
+     Checks if any versions of PHP are valid for the constraint provided.
+     Due to the complexity of evaluating these, a important test is maintained.
+     More information on these constraints can be found here:
+     https://getcomposer.org/doc/articles/versions.md#writing-version-constraints
+     
+     - Parameter constraint: The full constraint as a string (e.g. "^7.0")
+     - Parameter strict: Whether the minor version check is strict. See more below.
+     
+     The strict mode does not matter if a patch version is provided for all versions in the collection.
+     
+     Strict mode assumes that any PHP version lacking precise patch information, e.g. inferred
+     from Homebrew corresponds to the .0 patch version of that version. The default, which is imprecise,
+     assumes that the patch version is .999, which means that in all cases the patch version check is
+     always going to pass.
+     
+     **STRICT MODE (= patch precision on)**
+     
+     Given versions 8.0.? and 8.1.?, but the requirement is ^8.0.1, in strict mode only 8.1.? will
+     be considered valid (8.0 translates to 8.0.0 and as such is older than 8.0.1, 8.1.0 is OK).
+     When checking against actual PHP versions installed by the user, use strict mode.
+     
+     **NON-STRICT MODE (= patch precision off)**
+     
+     Given versions 8.0.? and 8.1.?, but the requirement is ^8.0.1, in non-strict mode version 8.0
+     is assumed to be equal to version 8.0.999, which is actually fine if 8.0.1 is the required version.
+     In non-strict mode, the patch version is ignored for regular version checks (no caret / tilde).
+     If checking compatibility with general Homebrew versions of PHP, do NOT use strict mode, since
+     the patch version there is not used. (The formula php@8.0 suffices for ^8.0.1.)
+     */
+    public func matching(constraint: String, strict: Bool = false) -> [PhpVersionNumber] {
+        if let version = PhpVersionNumber.make(from: constraint, type: .versionOnly) {
+            // Strict constraint (e.g. "7.0") -> returns specific version
+            return self.versions.filter {
+                $0.major == version.major
+                && $0.minor == version.minor
+                && (strict ? $0.patch(strict, version) == version.patch(strict) : true)
+            }
+        }
+        
+        if let version = PhpVersionNumber.make(from: constraint, type: .caretVersionRange) {
+            // Caret range means that the major version is never higher but minor version can be higher
+            // ^7.2 will be compatible with all versions between 7.2 and 8.0
+            return self.versions.filter {
+                $0.major == version.major &&
+                (
+                    // Either the minor version is the same and the patch is higher or equal
+                    $0.minor == version.minor && $0.patch(strict) >= version.patch(strict, $0)
+                    // or the minor version number has been bumped
+                    || $0.minor > version.minor
+                )
+            }
+        }
+        
+        if let version = PhpVersionNumber.make(from: constraint, type: .tildeVersionRange) {
+            // Tilde range means that most specific digit is used as the basis.
+            if version.patch != nil {
+                // If a patch is provided then the minor version cannot be bumped.
+                return self.versions.filter {
+                    $0.major == version.major && $0.minor == version.minor
+                    && $0.patch(strict, version) >= version.patch!
+                }
+            } else {
+                // If a patch is not provided then the major version cannot be bumped.
+                return self.versions.filter {
+                    $0.major == version.major && $0.minor >= version.minor
+                }
+            }
+        }
+        
+        return []
+    }
+}
+
+public struct PhpVersionNumber: Equatable {
+    let major: Int
+    let minor: Int
+    let patch: Int?
+    
+    public func patch(_ strictFallback: Bool, _ constraint: PhpVersionNumber? = nil) -> Int {
+        return patch ?? (strictFallback ? 0 : constraint?.patch ?? 999)
+    }
+    
+    public var homebrewVersion: String {
+        return "\(major).\(minor)"
+    }
+    
+    public enum MatchType: String {
+        case versionOnly = #"^(?<major>\d+).(?<minor>\d+).?(?<patch>\d+)?\z"#
+        case caretVersionRange = #"^\^(?<major>\d+).(?<minor>\d+).?(?<patch>\d+)?\z"#
+        case tildeVersionRange = #"^~(?<major>\d+).(?<minor>\d+).?(?<patch>\d+)?\z"#
+    }
+    
+    public static func make(from versionString: String, type: MatchType = .versionOnly) -> Self? {
+        let regex = try! NSRegularExpression(pattern: type.rawValue, options: [])
+        let match = regex.matches(in: versionString, options: [], range: NSMakeRange(0, versionString.count)).first
+        
+        if match != nil {
+            let major = Int(
+                versionString[Range(match!.range(withName: "major"), in: versionString)!]
+            )!
+            let minor = Int(
+                versionString[Range(match!.range(withName: "minor"), in: versionString)!]
+            )!
+            var patch: Int? = nil
+            if let minorRange = Range(match!.range(withName: "patch"), in: versionString) {
+                patch = Int(versionString[minorRange])
+            }
+            return Self(major: major, minor: minor, patch: patch)
+        }
+        
+        return nil
+    }
+}

phpmon-common/PHP/PhpExtension.swift

@@ -0,0 +1,108 @@
+//
+//  PhpExtension.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 31/01/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+/**
+ A PHP extension that was detected in the php.ini file.
+ Please note that the extension may be disabled.
+ 
+ - Note: You need to know more about regular expressions to be able to deal with these NSRegularExpression
+ instances. You can find more information here: https://nshipster.com/swift-regular-expressions/
+ */
+class PhpExtension {
+    
+    /// The file where this extension was located.
+    var file: String
+    
+    /// The original string that was used to determine this extension is active.
+    var line: String
+    
+    /// The name of the extension. This is always identical to the name found in the original string. If you want to display this name, capitalize this.
+    var name: String
+    
+    /// Whether the extension has been enabled.
+    var enabled: Bool
+    
+    /// The file where this extension was located, but only the filename, not the full path to the .ini file.
+    var fileNameOnly: String {
+        return String(file.split(separator: "/").last ?? "php.ini")
+    }
+    
+    /**
+     This regular expression will allow us to identify lines which activate an extension.
+     
+     It will match the following items:
+     
+     * `extension="name.so"`
+     * `zend_extension="name.so"`
+     * `; extension="name.so"`
+     * `; zend_extension="name.so"`
+     
+     - Note: Extensions that are disabled in a different way will not be detected. This is intentional.
+     */
+    static let extensionRegex = #"^(extension|zend_extension|;(\s?)extension|;(\s?)zend_extension)(\s?)(=)(\s?)(?<name>["]?(?:\/?.\/?)+(?:\.so)"?)$"#
+    
+    /**
+     When registering an extension, we do that based on the line found inside the .ini file.
+     */
+    init(_ line: String, file: String) {
+        let regex = try! NSRegularExpression(pattern: Self.extensionRegex, options: [])
+        let match = regex.matches(in: line, options: [], range: NSMakeRange(0, line.count)).first
+        let range = Range(match!.range(withName: "name"), in: line)!
+        
+        self.line = line
+        
+        let fullPath = String(line[range])
+            .replacingOccurrences(of: "\"", with: "") // replace excess "
+            .replacingOccurrences(of: ".so", with: "") // replace excess .so
+        
+        self.name = String(fullPath.split(separator: "/").last!) // take last segment
+        
+        self.enabled = !line.contains(";")
+        self.file = file
+    }
+    
+    /**
+     This simply toggles the extension in the .ini file. You may need to restart the other services in order for this change to apply.
+     */
+    func toggle() {
+        let newLine = enabled
+            // DISABLED: Commented out line
+            ? "; \(line)"
+            // ENABLED: Line where the comment delimiter (;) is removed
+            : line.replacingOccurrences(of: "; ", with: "")
+        
+        sed(file: file, original: line, replacement: newLine)
+        
+        enabled.toggle()
+    }
+    
+    // MARK: - Static Methods
+    
+    /**
+     This method will attempt to identify all extensions in the .ini file at a certain URL.
+     */
+    static func load(from path: URL) -> [PhpExtension] {
+        let file = try? String(contentsOf: path, encoding: .utf8)
+        
+        if (file == nil) {
+            Log.err("There was an issue reading the file. Assuming no extensions were found.")
+            return []
+        }
+        
+        return file!.components(separatedBy: "\n")
+            .filter {
+                return $0.range(of: Self.extensionRegex, options: .regularExpression) != nil
+            }
+            .map {
+                return PhpExtension($0, file: path.path)
+            }
+    }
+    
+}

phpmon-common/PHP/PhpInstallation.swift

@@ -0,0 +1,36 @@
+//
+//  PhpInstallation.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 28/11/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+class PhpInstallation {
+    
+    var longVersion: PhpVersionNumber
+    
+    /**
+     In order to determine details about a PHP installation, we’ll simply run `php-config --version`
+     in the relevant directory.
+     */
+    init(_ version: String) {
+        
+        let phpConfigExecutablePath = "\(Paths.optPath)/php@\(version)/bin/php-config"
+        self.longVersion = PhpVersionNumber.make(from: version)!
+        
+        if Shell.fileExists(phpConfigExecutablePath) {
+            let longVersionString = Command.execute(
+                path: phpConfigExecutablePath,
+                arguments: ["--version"]
+            ).trimmingCharacters(in: .whitespacesAndNewlines)
+            
+            self.longVersion = PhpVersionNumber.make(
+                from: String(longVersionString.split(separator: "-")[0])
+            )!
+        }
+    }
+    
+}

phpmon-common/PHP/Switcher/InternalSwitcher.swift

@@ -0,0 +1,58 @@
+//
+//  InternalSwitcher.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 24/12/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+class InternalSwitcher: PhpSwitcher {
+    
+    /**
+     Switching to a new PHP version involves:
+     - unlinking the current version
+     - stopping the active services
+     - linking the new desired version
+     
+     Please note that depending on which version is installed,
+     the version that is switched to may or may not be identical to `php`
+     (without @version).
+     */
+    func performSwitch(to version: String, completion: @escaping () -> Void)
+    {
+        Log.info("Switching to \(version), unlinking all versions...")
+        
+        let group = DispatchGroup()
+        
+        PhpEnv.shared.availablePhpVersions.forEach { (available) in
+            group.enter()
+            
+            DispatchQueue.global(qos: .userInitiated).async {
+                let formula = (available == PhpEnv.brewPhpVersion)
+                ? "php" : "php@\(available)"
+                
+                brew("unlink \(formula)")
+                brew("services stop \(formula)", sudo: true)
+                
+                Log.perf("Unlinked and stopped services for \(formula)")
+                
+                group.leave()
+            }
+        }
+        
+        group.notify(queue: .global(qos: .userInitiated)) {
+            Log.info("All versions have been unlinked!")
+            Log.info("Linking the new version!")
+            
+            let formula = (version == PhpEnv.brewPhpVersion) ? "php" : "php@\(version)"
+            brew("link \(formula) --overwrite --force")
+            brew("services start \(formula)", sudo: true)
+            
+            Log.info("The new version has been linked!")
+            completion()
+        }
+    }
+    
+}

phpmon-common/PHP/Switcher/PhpSwitcher.swift

@@ -0,0 +1,15 @@
+//
+//  PhpVersionSwitchContract.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 24/12/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+protocol PhpSwitcher {
+    
+    func performSwitch(to version: String, completion: @escaping () -> Void)
+    
+}

phpmon-tests/BrewJsonParserTest.swift

@@ -0,0 +1,85 @@
+//
+//  BrewJsonParserTest.swift
+//  phpmon-tests
+//
+//  Created by Nico Verbruggen on 14/02/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import XCTest
+
+class BrewJsonParserTest: XCTestCase {
+    
+    // - MARK: SYNTHETIC TESTS
+
+    static var jsonBrewFile: URL {
+        return Bundle(for: Self.self)
+            .url(forResource: "brew", withExtension: "json")!
+    }
+
+    func testCanLoadExtensionJson() throws {
+        let json = try! String(contentsOf: Self.jsonBrewFile, encoding: .utf8)
+        let package = try! JSONDecoder().decode(
+            [HomebrewPackage].self, from: json.data(using: .utf8)!
+        ).first!
+        
+        XCTAssertEqual(package.name, "php")
+        XCTAssertEqual(package.full_name, "php")
+        XCTAssertEqual(package.aliases.first!, "php@8.0")
+        XCTAssertEqual(package.installed.contains(where: { installed in
+            installed.version.starts(with: "8.0")
+        }), true)
+    }
+    
+    static var jsonBrewServicesFile: URL {
+        return Bundle(for: Self.self)
+            .url(forResource: "brew-services", withExtension: "json")!
+    }
+    
+    func testCanParseServicesJson() throws {
+        let json = try! String(contentsOf: Self.jsonBrewServicesFile, encoding: .utf8)
+        let services = try! JSONDecoder().decode(
+            [HomebrewService].self, from: json.data(using: .utf8)!
+        )
+        
+        XCTAssertGreaterThan(services.count, 0)
+        XCTAssertEqual(services.first?.name, "dnsmasq")
+        XCTAssertEqual(services.first?.service_name, "homebrew.mxcl.dnsmasq")
+    }
+    
+    // - MARK: LIVE TESTS
+
+    /// This test requires that you have a valid Homebrew installation set up,
+    /// and requires the Valet services to be installed: php, nginx and dnsmasq.
+    /// If this test fails, there is an issue with your Homebrew installation
+    /// or the JSON API of the Homebrew output may have changed.
+    func testCanParseServicesJsonFromCliOutput() throws {
+        let services = try! JSONDecoder().decode(
+            [HomebrewService].self,
+            from: Shell.pipe(
+                "sudo \(Paths.brew) services info --all --json",
+                requiresPath: true
+            ).data(using: .utf8)!
+        ).filter({ service in
+            return ["php", "nginx", "dnsmasq"].contains(service.name)
+        })
+        
+        XCTAssertTrue(services.contains(where: {$0.name == "php"} ))
+        XCTAssertTrue(services.contains(where: {$0.name == "nginx"} ))
+        XCTAssertTrue(services.contains(where: {$0.name == "dnsmasq"} ))
+        XCTAssertEqual(services.count, 3)
+    }
+    
+    /// This test requires that you have a valid Homebrew installation set up,
+    /// and requires the `php` formula to be installed.
+    /// If this test fails, there is an issue with your Homebrew installation
+    /// or the JSON API of the Homebrew output may have changed.
+    func testCanLoadExtensionJsonFromCliOutput() throws {
+        let package = try! JSONDecoder().decode(
+            [HomebrewPackage].self,
+            from: Shell.pipe("\(Paths.brew) info php --json", requiresPath: true).data(using: .utf8)!
+        ).first!
+        
+        XCTAssertTrue(package.name == "php")
+    }
+}

phpmon-tests/CommandTest.swift

@@ -0,0 +1,25 @@
+//
+//  CommandTest.swift
+//  phpmon-tests
+//
+//  Created by Nico Verbruggen on 13/02/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import XCTest
+
+class CommandTest: XCTestCase {
+
+    func testDeterminePhpVersion() {
+        let version = Command.execute(
+            path: Paths.php,
+            arguments: ["-v"]
+        )
+        
+        XCTAssert(version.contains("(cli)"))
+        XCTAssert(version.contains("NTS"))
+        XCTAssert(version.contains("built"))
+        XCTAssert(version.contains("Zend"))
+    }
+    
+}

phpmon-tests/ExtensionParserTest.swift

@@ -0,0 +1,72 @@
+//
+//  ExtensionParserTest.swift
+//  phpmon-tests
+//
+//  Created by Nico Verbruggen on 13/02/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import XCTest
+
+class ExtensionParserTest: XCTestCase {
+    
+    static var phpIniFileUrl: URL {
+        return Bundle(for: Self.self).url(forResource: "php", withExtension: "ini")!
+    }
+
+    func testCanLoadExtension() throws {
+        let extensions = PhpExtension.load(from: Self.phpIniFileUrl)
+        
+        XCTAssertGreaterThan(extensions.count, 0)
+    }
+    
+    func testExtensionNameIsCorrect() throws {
+        let extensions = PhpExtension.load(from: Self.phpIniFileUrl)
+        
+        let extensionNames = extensions.map { (ext) -> String in
+            return ext.name
+        }
+        
+        // These 6 should be found
+        XCTAssertTrue(extensionNames.contains("xdebug"))
+        XCTAssertTrue(extensionNames.contains("imagick"))
+        XCTAssertTrue(extensionNames.contains("sodium-next"))
+        XCTAssertTrue(extensionNames.contains("opcache"))
+        XCTAssertTrue(extensionNames.contains("yaml"))
+        XCTAssertTrue(extensionNames.contains("custom"))
+        
+        XCTAssertFalse(extensionNames.contains("fake"))
+        XCTAssertFalse(extensionNames.contains("nice"))
+    }
+    
+    func testExtensionStatusIsCorrect() throws {
+        let extensions = PhpExtension.load(from: Self.phpIniFileUrl)
+        
+        // xdebug should be enabled
+        XCTAssertEqual(extensions[0].enabled, true)
+        
+        // imagick should be disabled
+        XCTAssertEqual(extensions[1].enabled, false)
+    }
+    
+    func testToggleWorksAsExpected() throws {
+        let destination = Utility.copyToTemporaryFile(resourceName: "php", fileExtension: "ini")!
+        let extensions = PhpExtension.load(from: destination)
+        XCTAssertEqual(extensions.count, 6)
+        
+        // Try to disable xdebug (should be detected first)!
+        let xdebug = extensions.first!
+        XCTAssertTrue(xdebug.name == "xdebug")
+        XCTAssertEqual(xdebug.enabled, true)
+        xdebug.toggle()
+        XCTAssertEqual(xdebug.enabled, false)
+        
+        // Check if the file contains the appropriate data
+        let file = try! String(contentsOf: destination, encoding: .utf8)
+        XCTAssertTrue(file.contains("; zend_extension=\"xdebug.so\""))
+        
+        // Make sure if we load the data again, it's disabled
+        XCTAssertEqual(PhpExtension.load(from: destination).first!.enabled, false)
+    }
+
+}

phpmon-tests/Info.plist

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+	<key>CFBundleDevelopmentRegion</key>
+	<string>$(DEVELOPMENT_LANGUAGE)</string>
+	<key>CFBundleExecutable</key>
+	<string>$(EXECUTABLE_NAME)</string>
+	<key>CFBundleIdentifier</key>
+	<string>$(PRODUCT_BUNDLE_IDENTIFIER)</string>
+	<key>CFBundleInfoDictionaryVersion</key>
+	<string>6.0</string>
+	<key>CFBundleName</key>
+	<string>$(PRODUCT_NAME)</string>
+	<key>CFBundlePackageType</key>
+	<string>$(PRODUCT_BUNDLE_PACKAGE_TYPE)</string>
+	<key>CFBundleShortVersionString</key>
+	<string>1.0</string>
+	<key>CFBundleVersion</key>
+	<string>1</string>
+</dict>
+</plist>

phpmon-tests/PhpVersionDetectionTest.swift

@@ -0,0 +1,29 @@
+//
+//  PhpVersionDetectionTest.swift
+//  phpmon-tests
+//
+//  Created by Nico Verbruggen on 01/04/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import XCTest
+
+class PhpVersionDetectionTest: XCTestCase {
+
+    func testCanDetectValidPhpVersions() throws {
+        let outcome = PhpEnv.shared.extractPhpVersions(from: [
+            "", // empty lines should be omitted
+            "php@8.0",
+            "php@8.0", // should only be detected once
+            "meta-php@8.0", // should be omitted, invalid
+            "php@8.0-coolio", // should be omitted, invalid
+            "php@7.0",
+            "",
+            "unrelatedphp@1.0", // should be omitted, invalid
+            "php@5.6",
+            "php@5.4" // should be omitted, not supported
+        ], checkBinaries: false)
+        
+        XCTAssertEqual(outcome, ["8.0", "7.0", "5.6"])
+    }
+}

phpmon-tests/PhpVersionNumberTest.swift

@@ -0,0 +1,194 @@
+//
+//  PhpVersionNumberTest.swift
+//  PHP Monitor
+//
+//  Created by Nico Verbruggen on 23/01/2022.
+//  Copyright © 2022 Nico Verbruggen. All rights reserved.
+//
+
+import XCTest
+
+class PhpVersionNumberTest: XCTestCase {
+
+    func testCanDeconstructPhpVersion() throws {
+        XCTAssertEqual(
+            PhpVersionNumber.make(from: "8.0.11"),
+            PhpVersionNumber(major: 8, minor: 0, patch: 11)
+        )
+        XCTAssertEqual(
+            PhpVersionNumber.make(from: "7.4.2"),
+            PhpVersionNumber(major: 7, minor: 4, patch: 2)
+        )
+        XCTAssertEqual(
+            PhpVersionNumber.make(from: "7.4"),
+            PhpVersionNumber(major: 7, minor: 4, patch: nil)
+        )
+        XCTAssertEqual(
+            PhpVersionNumber.make(from: "7"),
+            nil
+        )
+    }
+    
+    func testCanCheckFixedConstraints() throws {
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"])
+                .matching(constraint: "7.0"),
+            PhpVersionNumberCollection
+                .make(from: ["7.0"]).all
+        )
+        
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4.3", "7.3.3", "7.2.3", "7.1.3", "7.0.3"])
+                .matching(constraint: "7.0.3"),
+            PhpVersionNumberCollection
+                .make(from: ["7.0.3"]).all
+        )
+        
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"])
+                .matching(constraint: "7.0.3", strict: false),
+            PhpVersionNumberCollection
+                .make(from: ["7.0"]).all
+        )
+        
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"])
+                .matching(constraint: "7.0.3", strict: true),
+            PhpVersionNumberCollection
+                .make(from: []).all
+        )
+    }
+    
+    func testCanCheckCaretConstraints() throws {
+        // 1. Imprecise checks
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"])
+                .matching(constraint: "^7.0", strict: true),
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"]).all
+        )
+        
+        // 2. Imprecise check with precise constraint (lenient AKA not strict)
+        // These versions are interpreted as 7.4.999, 7.3.999, 7.2.999, etc.
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"])
+                .matching(constraint: "^7.0.1", strict: false),
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"]).all
+        )
+        
+        // 3. Imprecise check with precise constraint (strict mode)
+        // These versions are interpreted as 7.4.0, 7.3.0, 7.2.0, etc.
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"])
+                .matching(constraint: "^7.0.1", strict: true),
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1"]).all
+        )
+        
+        // 4. Precise members and constraint all around
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"])
+                .matching(constraint: "^7.0.1", strict: true),
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"]).all
+        )
+        
+        // 5. Precise members but imprecise constraint (strict mode)
+        // In strict mode the constraint's patch version is assumed to be 0
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"])
+                .matching(constraint: "^7.0", strict: true),
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"]).all
+        )
+        
+        // 6. Precise members but imprecise constraint (lenient mode)
+        // In lenient mode the constraint's patch version is assumed to be equal
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"])
+                .matching(constraint: "^7.0", strict: false),
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"]).all
+        )
+    }
+    
+    func testCanCheckTildeConstraints() throws {
+        // 1. Imprecise checks
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"])
+                .matching(constraint: "~7.0", strict: true),
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"]).all
+        )
+        
+        // 2. Imprecise check with precise constraint (lenient AKA not strict)
+        // These versions are interpreted as 7.4.999, 7.3.999, 7.2.999, etc.
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"])
+                .matching(constraint: "~7.0.1", strict: false),
+            // One result because 7.0.1 to 7.0.x is expected.
+            // 7.0.999 (assumed due to no strictness) is valid.
+            // 7.1.0 and up are not valid (minor version is too high).
+            PhpVersionNumberCollection
+                .make(from: ["7.0"]).all
+        )
+        
+        // 3. Imprecise check with precise constraint (strict mode)
+        // These versions are interpreted as 7.4.0, 7.3.0, 7.2.0, etc.
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4", "7.3", "7.2", "7.1", "7.0"])
+                .matching(constraint: "~7.0.1", strict: true),
+            // No results because 7.0.1 to 7.0.x is expected.
+            // 7.0.0 (assumed due to strictness) is not valid.
+            // 7.1.0 and up are also not valid (minor version is too high).
+            PhpVersionNumberCollection
+                .make(from: []).all
+        )
+        
+        // 4. Precise members and constraint all around
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"])
+                .matching(constraint: "~7.0.1", strict: true),
+            // Only 7.0 with a patch version of .1 or higher is OK.
+            // In this example, 7.0.10 is OK but all other versions are too new.
+            PhpVersionNumberCollection
+                .make(from: ["7.0.10"]).all
+        )
+        
+        // 5. Precise members but imprecise constraint (strict mode)
+        // In strict mode the constraint's patch version is assumed to be 0.
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"])
+                .matching(constraint: "~7.0", strict: true),
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"]).all
+        )
+        
+        // 6. Precise members but imprecise constraint (lenient mode)
+        // In lenient mode the constraint's patch version is assumed to be equal.
+        // (Strictness does not make any difference here, but both should be tested.)
+        XCTAssertEqual(
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"])
+                .matching(constraint: "~7.0", strict: false),
+            PhpVersionNumberCollection
+                .make(from: ["7.4.10", "7.3.10", "7.2.10", "7.1.10", "7.0.10"]).all
+        )
+    }
+}

phpmon-tests/Test Files/brew-services.json

@@ -0,0 +1,135 @@
+[
+    {
+        "name": "dnsmasq",
+        "service_name": "homebrew.mxcl.dnsmasq",
+        "running": true,
+        "loaded": true,
+        "schedulable": false,
+        "pid": 106,
+        "exit_code": 0,
+        "user": "root",
+        "status": "started",
+        "file": "/Library/LaunchDaemons/homebrew.mxcl.dnsmasq.plist",
+        "command": "/opt/homebrew/opt/dnsmasq/sbin/dnsmasq --keep-in-foreground -C /opt/homebrew/etc/dnsmasq.conf -7 /opt/homebrew/etc/dnsmasq.d,*.conf",
+        "working_dir": null,
+        "root_dir": null,
+        "log_path": null,
+        "error_log_path": null,
+        "interval": null,
+        "cron": null
+    },
+    {
+        "name": "httpd",
+        "service_name": "homebrew.mxcl.httpd",
+        "running": false,
+        "loaded": false,
+        "schedulable": false,
+        "pid": null,
+        "exit_code": null,
+        "user": null,
+        "status": "none",
+        "file": "/opt/homebrew/opt/httpd/homebrew.mxcl.httpd.plist",
+        "command": "/opt/homebrew/opt/httpd/bin/httpd -D FOREGROUND",
+        "working_dir": null,
+        "root_dir": null,
+        "log_path": null,
+        "error_log_path": null,
+        "interval": null,
+        "cron": null
+    },
+    {
+        "name": "mailhog",
+        "service_name": "homebrew.mxcl.mailhog",
+        "running": false,
+        "loaded": false,
+        "schedulable": false,
+        "pid": null,
+        "exit_code": null,
+        "user": null,
+        "status": "none",
+        "file": "/opt/homebrew/opt/mailhog/homebrew.mxcl.mailhog.plist",
+        "command": "/opt/homebrew/opt/mailhog/bin/MailHog",
+        "working_dir": null,
+        "root_dir": null,
+        "log_path": "/opt/homebrew/var/log/mailhog.log",
+        "error_log_path": "/opt/homebrew/var/log/mailhog.log",
+        "interval": null,
+        "cron": null
+    },
+    {
+        "name": "nginx",
+        "service_name": "homebrew.mxcl.nginx",
+        "running": true,
+        "loaded": true,
+        "schedulable": false,
+        "pid": 116,
+        "exit_code": 0,
+        "user": "root",
+        "status": "started",
+        "file": "/Library/LaunchDaemons/homebrew.mxcl.nginx.plist",
+        "command": "/opt/homebrew/opt/nginx/bin/nginx -g daemon off;",
+        "working_dir": "/opt/homebrew",
+        "root_dir": null,
+        "log_path": null,
+        "error_log_path": null,
+        "interval": null,
+        "cron": null
+    },
+    {
+        "name": "php",
+        "service_name": "homebrew.mxcl.php",
+        "running": true,
+        "loaded": true,
+        "schedulable": false,
+        "pid": 142,
+        "exit_code": 0,
+        "user": "root",
+        "status": "started",
+        "file": "/Library/LaunchDaemons/homebrew.mxcl.php.plist",
+        "command": "/opt/homebrew/opt/php/sbin/php-fpm --nodaemonize",
+        "working_dir": "/opt/homebrew/var",
+        "root_dir": null,
+        "log_path": null,
+        "error_log_path": "/opt/homebrew/var/log/php-fpm.log",
+        "interval": null,
+        "cron": null
+    },
+    {
+        "name": "php@8.0",
+        "service_name": "homebrew.mxcl.php@8.0",
+        "running": false,
+        "loaded": false,
+        "schedulable": false,
+        "pid": null,
+        "exit_code": null,
+        "user": null,
+        "status": "none",
+        "file": "/opt/homebrew/opt/php@8.0/homebrew.mxcl.php@8.0.plist",
+        "command": "/opt/homebrew/opt/php@8.0/sbin/php-fpm --nodaemonize",
+        "working_dir": "/opt/homebrew/var",
+        "root_dir": null,
+        "log_path": null,
+        "error_log_path": "/opt/homebrew/var/log/php-fpm.log",
+        "interval": null,
+        "cron": null
+    },
+    {
+        "name": "unbound",
+        "service_name": "homebrew.mxcl.unbound",
+        "running": false,
+        "loaded": false,
+        "schedulable": false,
+        "pid": null,
+        "exit_code": null,
+        "user": null,
+        "status": "none",
+        "file": "/opt/homebrew/opt/unbound/homebrew.mxcl.unbound.plist",
+        "command": "/opt/homebrew/opt/unbound/sbin/unbound -d -c /opt/homebrew/etc/unbound/unbound.conf",
+        "working_dir": null,
+        "root_dir": null,
+        "log_path": null,
+        "error_log_path": null,
+        "interval": null,
+        "cron": null
+    }
+]

phpmon-tests/Test Files/brew.json

@@ -0,0 +1,332 @@
+[
+    {
+        "name":"php",
+        "full_name":"php",
+        "tap":"homebrew/core",
+        "oldname":null,
+        "aliases":[
+            "php@8.0"
+        ],
+        "versioned_formulae":[
+            "php@7.4",
+            "php@7.3",
+            "php@7.2"
+        ],
+        "desc":"General-purpose scripting language",
+        "license":"PHP-3.01",
+        "homepage":"https://www.php.net/",
+        "versions":{
+            "stable":"8.0.2",
+            "head":"HEAD",
+            "bottle":true
+        },
+        "urls":{
+            "stable":{
+                "url":"https://www.php.net/distributions/php-8.0.2.tar.xz",
+                "tag":null,
+                "revision":null
+            }
+        },
+        "revision":0,
+        "version_scheme":0,
+        "bottle":{
+            "stable":{
+                "rebuild":0,
+                "cellar":"/opt/homebrew/Cellar",
+                "prefix":"/opt/homebrew",
+                "root_url":"https://homebrew.bintray.com/bottles",
+                "files":{
+                    "arm64_big_sur":{
+                        "url":"https://homebrew.bintray.com/bottles/php-8.0.2.arm64_big_sur.bottle.tar.gz",
+                        "sha256":"cbefa1db73d08b9af4593a44512b8d727e43033ee8517736bae5f16315501b12"
+                    },
+                    "big_sur":{
+                        "url":"https://homebrew.bintray.com/bottles/php-8.0.2.big_sur.bottle.tar.gz",
+                        "sha256":"6857142e12254b15da4e74c2986dd24faca57dac8d467b04621db349e277dd63"
+                    },
+                    "catalina":{
+                        "url":"https://homebrew.bintray.com/bottles/php-8.0.2.catalina.bottle.tar.gz",
+                        "sha256":"b651611134c18f93fdf121a4277b51b197a896a19ccb8020289b4e19e0638349"
+                    },
+                    "mojave":{
+                        "url":"https://homebrew.bintray.com/bottles/php-8.0.2.mojave.bottle.tar.gz",
+                        "sha256":"9583a51fcc6f804aadbb14e18f770d4fb4973deaed6ddc4770342e62974ffbca"
+                    }
+                }
+            }
+        },
+        "keg_only":false,
+        "bottle_disabled":false,
+        "options":[
+            
+        ],
+        "build_dependencies":[
+            "httpd",
+            "pkg-config"
+        ],
+        "dependencies":[
+            "apr",
+            "apr-util",
+            "argon2",
+            "aspell",
+            "autoconf",
+            "curl",
+            "freetds",
+            "gd",
+            "gettext",
+            "glib",
+            "gmp",
+            "icu4c",
+            "krb5",
+            "libffi",
+            "libpq",
+            "libsodium",
+            "libzip",
+            "oniguruma",
+            "openldap",
+            "openssl@1.1",
+            "pcre2",
+            "sqlite",
+            "tidy-html5",
+            "unixodbc"
+        ],
+        "recommended_dependencies":[
+            
+        ],
+        "optional_dependencies":[
+            
+        ],
+        "uses_from_macos":[
+            {
+                "xz":"build"
+            },
+            "bzip2",
+            "libedit",
+            "libxml2",
+            "libxslt",
+            "zlib"
+        ],
+        "requirements":[
+            
+        ],
+        "conflicts_with":[
+            
+        ],
+        "caveats":"To enable PHP in Apache add the following to httpd.conf and restart Apache:\n    LoadModule php_module $(brew --prefix)/opt/php/lib/httpd/modules/libphp.so\n\n    <FilesMatch \\.php$>\n        SetHandler application/x-httpd-php\n    </FilesMatch>\n\nFinally, check DirectoryIndex includes index.php\n    DirectoryIndex index.php index.html\n\nThe php.ini and php-fpm.ini file can be found in:\n    $(brew --prefix)/etc/php/8.0/\n",
+        "installed":[
+            {
+                "version":"8.0.2",
+                "used_options":[
+                    
+                ],
+                "built_as_bottle":true,
+                "poured_from_bottle":true,
+                "runtime_dependencies":[
+                    {
+                        "full_name":"apr",
+                        "version":"1.7.0"
+                    },
+                    {
+                        "full_name":"openssl@1.1",
+                        "version":"1.1.1i"
+                    },
+                    {
+                        "full_name":"apr-util",
+                        "version":"1.6.1"
+                    },
+                    {
+                        "full_name":"argon2",
+                        "version":"20190702"
+                    },
+                    {
+                        "full_name":"aspell",
+                        "version":"0.60.8"
+                    },
+                    {
+                        "full_name":"autoconf",
+                        "version":"2.69"
+                    },
+                    {
+                        "full_name":"brotli",
+                        "version":"1.0.9"
+                    },
+                    {
+                        "full_name":"gettext",
+                        "version":"0.21"
+                    },
+                    {
+                        "full_name":"libunistring",
+                        "version":"0.9.10"
+                    },
+                    {
+                        "full_name":"libidn2",
+                        "version":"2.3.0"
+                    },
+                    {
+                        "full_name":"libmetalink",
+                        "version":"0.1.3"
+                    },
+                    {
+                        "full_name":"libssh2",
+                        "version":"1.9.0"
+                    },
+                    {
+                        "full_name":"c-ares",
+                        "version":"1.17.1"
+                    },
+                    {
+                        "full_name":"jemalloc",
+                        "version":"5.2.1"
+                    },
+                    {
+                        "full_name":"libev",
+                        "version":"4.33"
+                    },
+                    {
+                        "full_name":"nghttp2",
+                        "version":"1.43.0"
+                    },
+                    {
+                        "full_name":"openldap",
+                        "version":"2.4.57"
+                    },
+                    {
+                        "full_name":"rtmpdump",
+                        "version":"2.4+20151223"
+                    },
+                    {
+                        "full_name":"zstd",
+                        "version":"1.4.8"
+                    },
+                    {
+                        "full_name":"curl",
+                        "version":"7.75.0"
+                    },
+                    {
+                        "full_name":"libtool",
+                        "version":"2.4.6"
+                    },
+                    {
+                        "full_name":"unixodbc",
+                        "version":"2.3.9"
+                    },
+                    {
+                        "full_name":"freetds",
+                        "version":"1.2.18"
+                    },
+                    {
+                        "full_name":"libpng",
+                        "version":"1.6.37"
+                    },
+                    {
+                        "full_name":"freetype",
+                        "version":"2.10.4"
+                    },
+                    {
+                        "full_name":"fontconfig",
+                        "version":"2.13.1"
+                    },
+                    {
+                        "full_name":"jpeg",
+                        "version":"9d"
+                    },
+                    {
+                        "full_name":"libtiff",
+                        "version":"4.2.0"
+                    },
+                    {
+                        "full_name":"webp",
+                        "version":"1.2.0"
+                    },
+                    {
+                        "full_name":"gd",
+                        "version":"2.3.1"
+                    },
+                    {
+                        "full_name":"libffi",
+                        "version":"3.3"
+                    },
+                    {
+                        "full_name":"pcre",
+                        "version":"8.44"
+                    },
+                    {
+                        "full_name":"gdbm",
+                        "version":"1.18.1"
+                    },
+                    {
+                        "full_name":"readline",
+                        "version":"8.1"
+                    },
+                    {
+                        "full_name":"sqlite",
+                        "version":"3.34.0"
+                    },
+                    {
+                        "full_name":"tcl-tk",
+                        "version":"8.6.11"
+                    },
+                    {
+                        "full_name":"xz",
+                        "version":"5.2.5"
+                    },
+                    {
+                        "full_name":"python@3.9",
+                        "version":"3.9.1"
+                    },
+                    {
+                        "full_name":"glib",
+                        "version":"2.66.6"
+                    },
+                    {
+                        "full_name":"gmp",
+                        "version":"6.2.1"
+                    },
+                    {
+                        "full_name":"icu4c",
+                        "version":"67.1"
+                    },
+                    {
+                        "full_name":"krb5",
+                        "version":"1.19"
+                    },
+                    {
+                        "full_name":"libpq",
+                        "version":"13.1"
+                    },
+                    {
+                        "full_name":"libsodium",
+                        "version":"1.0.18"
+                    },
+                    {
+                        "full_name":"libzip",
+                        "version":"1.7.3"
+                    },
+                    {
+                        "full_name":"oniguruma",
+                        "version":"6.9.6"
+                    },
+                    {
+                        "full_name":"pcre2",
+                        "version":"10.36"
+                    },
+                    {
+                        "full_name":"tidy-html5",
+                        "version":"5.6.0"
+                    }
+                ],
+                "installed_as_dependency":false,
+                "installed_on_request":true
+            }
+        ],
+        "linked_keg":"8.0.2",
+        "pinned":false,
+        "outdated":false,
+        "deprecated":false,
+        "deprecation_date":null,
+        "deprecation_reason":null,
+        "disabled":false,
+        "disable_date":null,
+        "disable_reason":null
+    }
+]

phpmon-tests/Test Files/valet-config.json

@@ -0,0 +1,8 @@
+{
+    "tld": "test",
+    "paths": [
+        "/Users/username/.config/valet/Sites",
+        "/Users/username/Sites"
+    ],
+    "loopback": "127.0.0.1"
+}

phpmon-tests/Utility.swift

@@ -0,0 +1,28 @@
+//
+//  Utility.swift
+//  phpmon-tests
+//
+//  Created by Nico Verbruggen on 14/02/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import Foundation
+
+class Utility {
+    
+    public static func copyToTemporaryFile(resourceName: String, fileExtension: String) -> URL? {
+        if let bundleURL = Bundle(for: Self.self).url(forResource: resourceName, withExtension: fileExtension) {
+            let tempDirectoryURL = NSURL.fileURL(withPath: NSTemporaryDirectory(), isDirectory: true)
+            let targetURL = tempDirectoryURL.appendingPathComponent("\(UUID().uuidString).\(fileExtension)")
+            
+            do {
+                try FileManager.default.copyItem(at: bundleURL, to: targetURL)
+                return targetURL
+            } catch let error {
+                Log.err("Unable to copy file: \(error)")
+            }
+        }
+        
+        return nil
+    }
+}

phpmon-tests/ValetConfigParserTest.swift

@@ -0,0 +1,38 @@
+//
+//  ValetConfigParserTest.swift
+//  phpmon-tests
+//
+//  Created by Nico Verbruggen on 29/11/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import XCTest
+
+class ValetConfigParserTest: XCTestCase {
+    
+    static var jsonConfigFileUrl: URL {
+        return Bundle(for: Self.self).url(
+            forResource: "valet-config",
+            withExtension: "json"
+        )!
+    }
+    
+    func testCanLoadConfigFile() throws {
+        let json = try? String(
+            contentsOf: Self.jsonConfigFileUrl,
+            encoding: .utf8
+        )
+        let config = try! JSONDecoder().decode(
+            Valet.Configuration.self,
+            from: json!.data(using: .utf8)!
+        )
+        
+        XCTAssertEqual(config.tld, "test")
+        XCTAssertEqual(config.paths, [
+            "/Users/username/.config/valet/Sites",
+            "/Users/username/Sites"
+        ])
+        XCTAssertEqual(config.loopback, "127.0.0.1")
+    }
+    
+}

phpmon-tests/ValetTest.swift

@@ -0,0 +1,18 @@
+//
+//  ValetTest.swift
+//  phpmon-tests
+//
+//  Created by Nico Verbruggen on 29/11/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import XCTest
+
+class ValetTest: XCTestCase {
+
+    func testDetermineValetVersion() {
+        let version = valet("--version")
+        XCTAssert(version.contains("Laravel Valet 2."))
+    }
+    
+}

phpmon-tests/VersionExtractorTest.swift

@@ -0,0 +1,25 @@
+//
+//  VersionExtractorTest.swift
+//  phpmon-tests
+//
+//  Created by Nico Verbruggen on 16/12/2021.
+//  Copyright © 2021 Nico Verbruggen. All rights reserved.
+//
+
+import XCTest
+
+class VersionExtractorTest: XCTestCase {
+
+    func testExtractVersion() {
+        XCTAssertEqual(VersionExtractor.from("Laravel Valet 2.17.1"), "2.17.1")
+        XCTAssertEqual(VersionExtractor.from("Laravel Valet 2.0"), "2.0")
+    }
+    
+    func testVersionComparison() {
+        XCTAssertEqual("2.0".versionCompare("2.1"), .orderedAscending)
+        XCTAssertEqual("2.1".versionCompare("2.0"), .orderedDescending)
+        XCTAssertEqual("2.0".versionCompare("2.0"), .orderedSame)
+        XCTAssertEqual("2.17.0".versionCompare("2.17.1"), .orderedAscending)
+    }
+    
+}

phpmon/AppDelegate.swift

@@ -1,39 +0,0 @@
-//
-//  AppDelegate.swift
-//  PHP Monitor
-//
-//  Created by Nico Verbruggen on 11/06/2019.
-//  Copyright © 2019 Nico Verbruggen. All rights reserved.
-//
-
-import Cocoa
-
-@NSApplicationMain
-class AppDelegate: NSObject, NSApplicationDelegate {
-    
-    // MARK: - Variables
-    
-    let sharedShell : Shell
-    let state : App
-    let menu : MainMenu
-    
-    // MARK: - Initializer
-    
-    override init() {
-        self.sharedShell = Shell.user
-        self.state = App.shared
-        self.menu = MainMenu.shared
-        super.init()
-    }
-    
-    // MARK: - Lifecycle
-
-    func applicationDidFinishLaunching(_ aNotification: Notification) {
-        self.menu.startup()
-    }
-    
-    func applicationWillTerminate(_ aNotification: Notification) {
-        self.state.windowController = nil
-    }
-}
-

phpmon/Assets.xcassets/AppIcon.appiconset/Contents.json

@@ -1,68 +1,68 @@
 {
   "images" : [
     {
-      "size" : "16x16",
-      "idiom" : "mac",
       "filename" : "icon_16x16.png",
-      "scale" : "1x"
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "16x16"
     },
     {
-      "size" : "16x16",
-      "idiom" : "mac",
       "filename" : "icon_16x16@2x.png",
-      "scale" : "2x"
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "16x16"
     },
     {
-      "size" : "32x32",
-      "idiom" : "mac",
       "filename" : "icon_32x32.png",
-      "scale" : "1x"
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "32x32"
     },
     {
-      "size" : "32x32",
-      "idiom" : "mac",
       "filename" : "icon_32x32@2x.png",
-      "scale" : "2x"
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "32x32"
     },
     {
-      "size" : "128x128",
-      "idiom" : "mac",
       "filename" : "icon_128x128.png",
-      "scale" : "1x"
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "128x128"
     },
     {
-      "size" : "128x128",
-      "idiom" : "mac",
       "filename" : "icon_128x128@2x.png",
-      "scale" : "2x"
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "128x128"
     },
     {
-      "size" : "256x256",
-      "idiom" : "mac",
       "filename" : "icon_256x256.png",
-      "scale" : "1x"
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "256x256"
     },
     {
-      "size" : "256x256",
-      "idiom" : "mac",
       "filename" : "icon_256x256@2x.png",
-      "scale" : "2x"
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "256x256"
     },
     {
-      "size" : "512x512",
-      "idiom" : "mac",
       "filename" : "icon_512x512.png",
-      "scale" : "1x"
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "512x512"
     },
     {
-      "size" : "512x512",
-      "idiom" : "mac",
       "filename" : "icon_512x512@2x.png",
-      "scale" : "2x"
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "512x512"
     }
   ],
   "info" : {
-    "version" : 1,
-    "author" : "xcode"
+    "author" : "xcode",
+    "version" : 1
   }
-}
+}

phpmon/Assets.xcassets/AppIconBeta.appiconset/Contents.json

@@ -0,0 +1,68 @@
+{
+  "images" : [
+    {
+      "filename" : "icon_16x16.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "16x16"
+    },
+    {
+      "filename" : "icon_16x16@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "16x16"
+    },
+    {
+      "filename" : "icon_32x32.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "32x32"
+    },
+    {
+      "filename" : "icon_32x32@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "32x32"
+    },
+    {
+      "filename" : "icon_128x128.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "128x128"
+    },
+    {
+      "filename" : "icon_128x128@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "128x128"
+    },
+    {
+      "filename" : "icon_256x256.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "256x256"
+    },
+    {
+      "filename" : "icon_256x256@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "256x256"
+    },
+    {
+      "filename" : "icon_512x512.png",
+      "idiom" : "mac",
+      "scale" : "1x",
+      "size" : "512x512"
+    },
+    {
+      "filename" : "icon_512x512@2x.png",
+      "idiom" : "mac",
+      "scale" : "2x",
+      "size" : "512x512"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/Checkmark.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "check.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/Checkmark.imageset/check.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><!-- Font Awesome Pro 5.15.4 by @fontawesome - https://fontawesome.com License - https://fontawesome.com/license (Commercial License) --><path d="M435.848 83.466L172.804 346.51l-96.652-96.652c-4.686-4.686-12.284-4.686-16.971 0l-28.284 28.284c-4.686 4.686-4.686 12.284 0 16.971l133.421 133.421c4.686 4.686 12.284 4.686 16.971 0l299.813-299.813c4.686-4.686 4.686-12.284 0-16.971l-28.284-28.284c-4.686-4.686-12.284-4.686-16.97 0z"/></svg>

phpmon/Assets.xcassets/Contents.json

@@ -1,6 +1,6 @@
 {
   "info" : {
-    "version" : 1,
-    "author" : "xcode"
+    "author" : "xcode",
+    "version" : 1
   }
-}
+}

phpmon/Assets.xcassets/IconLinked.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "link.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/IconLinked.imageset/link.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><!-- Font Awesome Free 5.15.4 by @fontawesome - https://fontawesome.com License - https://fontawesome.com/license/free (Icons: CC BY 4.0, Fonts: SIL OFL 1.1, Code: MIT License) --><path d="M326.612 185.391c59.747 59.809 58.927 155.698.36 214.59-.11.12-.24.25-.36.37l-67.2 67.2c-59.27 59.27-155.699 59.262-214.96 0-59.27-59.26-59.27-155.7 0-214.96l37.106-37.106c9.84-9.84 26.786-3.3 27.294 10.606.648 17.722 3.826 35.527 9.69 52.721 1.986 5.822.567 12.262-3.783 16.612l-13.087 13.087c-28.026 28.026-28.905 73.66-1.155 101.96 28.024 28.579 74.086 28.749 102.325.51l67.2-67.19c28.191-28.191 28.073-73.757 0-101.83-3.701-3.694-7.429-6.564-10.341-8.569a16.037 16.037 0 0 1-6.947-12.606c-.396-10.567 3.348-21.456 11.698-29.806l21.054-21.055c5.521-5.521 14.182-6.199 20.584-1.731a152.482 152.482 0 0 1 20.522 17.197zM467.547 44.449c-59.261-59.262-155.69-59.27-214.96 0l-67.2 67.2c-.12.12-.25.25-.36.37-58.566 58.892-59.387 154.781.36 214.59a152.454 152.454 0 0 0 20.521 17.196c6.402 4.468 15.064 3.789 20.584-1.731l21.054-21.055c8.35-8.35 12.094-19.239 11.698-29.806a16.037 16.037 0 0 0-6.947-12.606c-2.912-2.005-6.64-4.875-10.341-8.569-28.073-28.073-28.191-73.639 0-101.83l67.2-67.19c28.239-28.239 74.3-28.069 102.325.51 27.75 28.3 26.872 73.934-1.155 101.96l-13.087 13.087c-4.35 4.35-5.769 10.79-3.783 16.612 5.864 17.194 9.042 34.999 9.69 52.721.509 13.906 17.454 20.446 27.294 10.606l37.106-37.106c59.271-59.259 59.271-155.699.001-214.959z"/></svg>

phpmon/Assets.xcassets/IconParked.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "car-alt.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/IconParked.imageset/car-alt.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 480 512"><!-- Font Awesome Free 5.15.4 by @fontawesome - https://fontawesome.com License - https://fontawesome.com/license/free (Icons: CC BY 4.0, Fonts: SIL OFL 1.1, Code: MIT License) --><path d="M438.66 212.33l-11.24-28.1-19.93-49.83C390.38 91.63 349.57 64 303.5 64h-127c-46.06 0-86.88 27.63-103.99 70.4l-19.93 49.83-11.24 28.1C17.22 221.5 0 244.66 0 272v48c0 16.12 6.16 30.67 16 41.93V416c0 17.67 14.33 32 32 32h32c17.67 0 32-14.33 32-32v-32h256v32c0 17.67 14.33 32 32 32h32c17.67 0 32-14.33 32-32v-54.07c9.84-11.25 16-25.8 16-41.93v-48c0-27.34-17.22-50.5-41.34-59.67zm-306.73-54.16c7.29-18.22 24.94-30.17 44.57-30.17h127c19.63 0 37.28 11.95 44.57 30.17L368 208H112l19.93-49.83zM80 319.8c-19.2 0-32-12.76-32-31.9S60.8 256 80 256s48 28.71 48 47.85-28.8 15.95-48 15.95zm320 0c-19.2 0-48 3.19-48-15.95S380.8 256 400 256s32 12.76 32 31.9-12.8 31.9-32 31.9z"/></svg>

phpmon/Assets.xcassets/Lock.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Locked.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/Lock.imageset/Locked.svg

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg width="100%" height="100%" viewBox="0 0 30 30" version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xml:space="preserve" xmlns:serif="http://www.serif.com/" style="fill-rule:evenodd;clip-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2;">
+    <rect id="Locked" x="0" y="0" width="30" height="30" style="fill:none;"/>
+    <g id="Locked1" serif:id="Locked">
+        <g transform="matrix(0.0468317,0,0,0.0468317,4.50971,3.01112)">
+            <path d="M400,256L152,256L152,152.9C152,113.3 183.7,80.4 223.3,80C263.3,79.6 296,112.1 296,152L296,266.079C296,279.379 376,279.137 376,265.837L376,152C376,68 307.5,-0.3 223.5,0C139.5,0.3 72,69.5 72,153.5L72,256L48,256C21.5,256 0,277.5 0,304L0,464C0,490.5 21.5,512 48,512L400,512C426.5,512 448,490.5 448,464L448,304C448,277.5 426.5,256 400,256Z" style="fill-rule:nonzero;"/>
+        </g>
+    </g>
+</svg>

phpmon/Assets.xcassets/LockUnlocked.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "Unlocked.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/LockUnlocked.imageset/Unlocked.svg

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg width="100%" height="100%" viewBox="0 0 30 30" version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xml:space="preserve" xmlns:serif="http://www.serif.com/" style="fill-rule:evenodd;clip-rule:evenodd;stroke-linejoin:round;stroke-miterlimit:2;">
+    <rect id="Locked" x="0" y="0" width="30" height="30" style="fill:none;"/>
+    <g id="Locked1" serif:id="Locked">
+        <g transform="matrix(0.0468317,0,0,0.0468317,4.50971,3.01112)">
+            <path d="M400,256L152,256L152,152.9C152,113.3 183.7,80.4 223.3,80C263.3,79.6 296,112.1 296,152L296,168C296,181.3 322.386,192 322.386,192L352,192C365.3,192 376,181.3 376,168L376,152C376,68 307.5,-0.3 223.5,0C139.5,0.3 72,69.5 72,153.5L72,256L48,256C21.5,256 0,277.5 0,304L0,464C0,490.5 21.5,512 48,512L400,512C426.5,512 448,490.5 448,464L448,304C448,277.5 426.5,256 400,256Z" style="fill-rule:nonzero;"/>
+        </g>
+    </g>
+</svg>

phpmon/Assets.xcassets/ServiceLoading.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "question-circle.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/ServiceLoading.imageset/question-circle.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><!-- Font Awesome Pro 5.15.4 by @fontawesome - https://fontawesome.com License - https://fontawesome.com/license (Commercial License) --><path d="M256 8C119.043 8 8 119.083 8 256c0 136.997 111.043 248 248 248s248-111.003 248-248C504 119.083 392.957 8 256 8zm0 448c-110.532 0-200-89.431-200-200 0-110.495 89.472-200 200-200 110.491 0 200 89.471 200 200 0 110.53-89.431 200-200 200zm107.244-255.2c0 67.052-72.421 68.084-72.421 92.863V300c0 6.627-5.373 12-12 12h-45.647c-6.627 0-12-5.373-12-12v-8.659c0-35.745 27.1-50.034 47.579-61.516 17.561-9.845 28.324-16.541 28.324-29.579 0-17.246-21.999-28.693-39.784-28.693-23.189 0-33.894 10.977-48.942 29.969-4.057 5.12-11.46 6.071-16.666 2.124l-27.824-21.098c-5.107-3.872-6.251-11.066-2.644-16.363C184.846 131.491 214.94 112 261.794 112c49.071 0 101.45 38.304 101.45 88.8zM298 368c0 23.159-18.841 42-42 42s-42-18.841-42-42 18.841-42 42-42 42 18.841 42 42z"/></svg>

phpmon/Assets.xcassets/ServiceOff.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "times-circle.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/ServiceOff.imageset/times-circle.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><!-- Font Awesome Pro 5.15.4 by @fontawesome - https://fontawesome.com License - https://fontawesome.com/license (Commercial License) --><path d="M256 8C119 8 8 119 8 256s111 248 248 248 248-111 248-248S393 8 256 8zm0 448c-110.5 0-200-89.5-200-200S145.5 56 256 56s200 89.5 200 200-89.5 200-200 200zm101.8-262.2L295.6 256l62.2 62.2c4.7 4.7 4.7 12.3 0 17l-22.6 22.6c-4.7 4.7-12.3 4.7-17 0L256 295.6l-62.2 62.2c-4.7 4.7-12.3 4.7-17 0l-22.6-22.6c-4.7-4.7-4.7-12.3 0-17l62.2-62.2-62.2-62.2c-4.7-4.7-4.7-12.3 0-17l22.6-22.6c4.7-4.7 12.3-4.7 17 0l62.2 62.2 62.2-62.2c4.7-4.7 12.3-4.7 17 0l22.6 22.6c4.7 4.7 4.7 12.3 0 17z"/></svg>

phpmon/Assets.xcassets/ServiceOn.imageset/Contents.json

@@ -0,0 +1,24 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "check-circle.svg",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  },
+  "properties" : {
+    "template-rendering-intent" : "template"
+  }
+}

phpmon/Assets.xcassets/ServiceOn.imageset/check-circle.svg

@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512"><!-- Font Awesome Pro 5.15.4 by @fontawesome - https://fontawesome.com License - https://fontawesome.com/license (Commercial License) --><path d="M256 8C119.033 8 8 119.033 8 256s111.033 248 248 248 248-111.033 248-248S392.967 8 256 8zm0 48c110.532 0 200 89.451 200 200 0 110.532-89.451 200-200 200-110.532 0-200-89.451-200-200 0-110.532 89.451-200 200-200m140.204 130.267l-22.536-22.718c-4.667-4.705-12.265-4.736-16.97-.068L215.346 303.697l-59.792-60.277c-4.667-4.705-12.265-4.736-16.97-.069l-22.719 22.536c-4.705 4.667-4.736 12.265-.068 16.971l90.781 91.516c4.667 4.705 12.265 4.736 16.97.068l172.589-171.204c4.704-4.668 4.734-12.266.067-16.971z"/></svg>

phpmon/Assets.xcassets/StatusBarIconStatic.imageset/Contents.json

@@ -0,0 +1,22 @@
+{
+  "images" : [
+    {
+      "filename" : "phpmon.png",
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "phpmon@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Assets.xcassets/StatusBarPHP.imageset/Contents.json

@@ -0,0 +1,21 @@
+{
+  "images" : [
+    {
+      "idiom" : "universal",
+      "scale" : "1x"
+    },
+    {
+      "filename" : "php@2x.png",
+      "idiom" : "universal",
+      "scale" : "2x"
+    },
+    {
+      "idiom" : "universal",
+      "scale" : "3x"
+    }
+  ],
+  "info" : {
+    "author" : "xcode",
+    "version" : 1
+  }
+}

phpmon/Classes/Commands/Actions.swift

@@ -1,47 +0,0 @@
-//
-//  Services.swift
-//  PHP Monitor
-//
-//  Created by Nico Verbruggen on 11/06/2019.
-//  Copyright © 2019 Nico Verbruggen. All rights reserved.
-//
-
-import Foundation
-import AppKit
-
-class Actions {
-    
-    public static func detectPhpVersions() -> [String] {
-        let files = Shell.user.pipe("ls /usr/local/opt | grep php@")
-        var versions = files.components(separatedBy: "\n")
-        // Remove all empty strings
-        versions.removeAll { (string) -> Bool in
-            return (string == "")
-        }
-        // Get a list of versions only
-        var versionsOnly : [String] = []
-        versions.forEach { (string) in
-            versionsOnly.append(string.components(separatedBy: "php@")[1])
-        }
-        return versionsOnly
-    }
-    
-    public static func switchToPhpVersion(version: String, availableVersions: [String]) {
-        availableVersions.forEach { (version) in
-            Shell.user.run("brew unlink php@\(version)")
-        }
-        if (availableVersions.contains("7.3")) {
-            Shell.user.run("brew link php@7.3")
-            if (version == Constants.LatestPhpVersion) {
-                Shell.user.run( "valet use php")
-            } else {
-                Shell.user.run("valet use php@\(version)")
-            }
-        }
-    }
-    
-    public static func openPhpConfigFolder(version: String) {
-        let files = [NSURL(fileURLWithPath: "/usr/local/etc/php/\(version)/php.ini")];
-        NSWorkspace.shared.activateFileViewerSelecting(files as [URL]);
-    }
-}

phpmon/Classes/Commands/Startup.swift

@@ -1,61 +0,0 @@
-//
-//  Environment.swift
-//  PHP Monitor
-//
-//  Created by Nico Verbruggen on 12/06/2019.
-//  Copyright © 2019 Nico Verbruggen. All rights reserved.
-//
-
-import Foundation
-
-class Startup {
-    
-    public static func checkEnvironment()
-    {
-        self.presentAlertOnMainThreadIf(
-            !Shell.user.pipe("which php").contains("/usr/local/bin/php"),
-            messageText: "PHP is not correctly installed",
-            informativeText: "You must install PHP via brew. Try running `which php` in Terminal, it should return `/usr/local/bin/php`. The app will not work correctly until you resolve this issue."
-        )
-        
-        self.presentAlertOnMainThreadIf(
-            !Shell.user.pipe("ls /usr/local/opt | grep php@7.3").contains("php@7.3"),
-            messageText: "PHP 7.3 is not correctly installed",
-            informativeText: "PHP 7.3 alias was not found in `/usr/local/opt`. The app will not work correctly until you resolve this issue."
-        )
-        
-        self.presentAlertOnMainThreadIf(
-            !Shell.user.pipe("which valet").contains("/usr/local/bin/valet"),
-            messageText: "Laravel Valet is not correctly installed",
-            informativeText: "You must install Valet via brew. Try running `which valet` in Terminal, it should return `/usr/local/bin/valet`. The app will not work correctly until you resolve this issue."
-        )
-        
-        self.presentAlertOnMainThreadIf(
-            !Shell.user.pipe("cat /private/etc/sudoers.d/brew").contains("/usr/local/bin/brew"),
-            messageText: "Brew has not been added to sudoers.d",
-            informativeText: "You must run `sudo valet trust` to ensure Valet can start and stop services without having to use sudo every time. The app will not work correctly until you resolve this issue."
-        )
-        
-        self.presentAlertOnMainThreadIf(
-            !Shell.user.pipe("cat /private/etc/sudoers.d/valet").contains("/usr/local/bin/valet"),
-            messageText: "Valet has not been added to sudoers.d",
-            informativeText: "You must run `sudo valet trust` to ensure Valet can start and stop services without having to use sudo every time. The app will not work correctly until you resolve this issue."
-        )
-    }
-    
-    private static func presentAlertOnMainThreadIf(
-        _ condition: Bool,
-        messageText: String,
-        informativeText: String
-    )
-    {
-        if (condition) {
-            DispatchQueue.main.async {
-                Alert.present(
-                    messageText: messageText,
-                    informativeText: informativeText
-                )
-            }
-        }
-    }
-}

phpmon/Classes/Helpers/Alert.swift

@@ -1,23 +0,0 @@
-//
-//  Alert.swift
-//  PHP Monitor
-//
-//  Created by Nico Verbruggen on 12/06/2019.
-//  Copyright © 2019 Nico Verbruggen. All rights reserved.
-//
-
-import Cocoa
-
-class Alert {
-    public static func present(
-        messageText: String,
-        informativeText: String,
-        buttonTitle: String = "OK"
-    ) {
-        let alert = NSAlert.init()
-        alert.messageText = messageText
-        alert.informativeText = informativeText
-        alert.addButton(withTitle: buttonTitle)
-        alert.runModal()
-    }
-}